Torque Specs For Mounting Brake Assemblies To Brake Mounting Flange
Updated 05/28/2015 | Published 05/25/2015
Question:
Im installing dexter 10inch never adjust brakes to an dexter ez lube axle. Is there a recommended torque spec for the 4 brake flange lug nuts? Thanks.
asked by: Kiko
0
Expert Reply:
I called my contact at Dexter about the 10 inch Nev-R-Adjust brakes like part # 23-468.
They told me when you are installing the brake assemblies to the brake mounting flange, the torque should be between 45 and 50 ft lbs.
expert reply by:
Jeffrey L
0
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Continue Researching
- Shop: Dexstar Steel Mini Mod Trailer Wheel - 15" x 6" Rim - 5 on 4-1/2 - Black
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: trailer safety chains
- Q&A: How to Select Trailer Tires with Correct Load Range Rating for Trailer Gross Weight
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Buyers Products Replacement Breakaway Pin and Cable
- Shop: Fastway Zip Coiled Trailer Breakaway Cable w/ Plunger Pin - 4' Long
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Search Results: valve stem
- Shop: Suspension Enhancement
- Shop: Americana Rubber, Snap-In Valve Stem - 1-1/4" Long - Up to 65 psi
- Q&A: How to Determine Between 5 on 4-1/2 and 5 on 5 Bolt Patterns for Hub Covers
- Shop: Trailer Hub and Drum Assembly - 6,000-lb Axles - 12" Diameter - 6 on 5-1/2 - Galvanized
- Search Results: akebrk~7r~sa
- Search Results: gs2250dl
- Search Results: apubr~8
- Search Results: gs2125dl
- Search Results: akebrk~7l~sa
- Q&A: How to Choose Correct Capacity for Trailer Safety Chains
- Video: Complete Breakdown of the Replacement Snap-In Grommet for Dexter Trailer Axle Tube Wire
- Video: All About the LubriMatic Prime Guard High Temperature Wheel Bearing Grease
- Q&A: Should Axles be Aligned with the Tongue or Frame on Trailer with Tongue that was Welded Off-Center
- Q&A: Replacement Lens for Clearance/Side Marker Light for a 2001 Coleman Pop-Up Camper
- Video: Feature Breakdown: Jacketed 2 Wire (Brake Wire)
- Shop: Roof Rack
- Video: Lock N Roll Articulating Coupler Review
- Q&A: Will Upgrading To Self-Adjusting Brake Assemblies Require Changing Out Hub/Drum Assemblies?
- Q&A: A 95 Hub Face With 73 Spring Center For Extra Clearance