How Should the Sealed, Uni-Lite Mini LED Side Marker and Clearance Light # MCL11RKB Install

Published 04/23/2015

Products Featured in This Question

Replacement Tail Light Bracket for CE Smith Boat Trailer - Galvanized Steel - 4-1/2" Long

(81)

$5.94

Uni-Lite LED Clearance and Side Marker Light w Grommet - Submersible - 2 Diodes - Red Lens

(806)

$6.54

Question:

Im looking for a mounting bracket for the Optronics Uni-Lite Mini LED Side Marker/Clearance Light MCL11RKB. Would the larger diameter hole in the Replacement Tail Light Bracket for CE Smith Boat Trailer CE26057G be sufficient to allow mounting of the aforementioned light? If not, would you have any other recommendations for a proper mount? Thank you.

asked by: Fernando

Expert Reply:

I went out and measured the diameter of the hole of the Replacement Tail Light Bracket # CE26057G and found it to be .78 of an inch.

The Sealed, Uni-Lite Mini LED Side Marker and Clearance Light # MCL11RKB that you also referenced is designed to fit a .68 inch hole.

The best way to mount the # MCL11RKB is going to be to drill an 11/16 inch hole in the trailer where you want the light installed.

expert reply by: Jameson C