Will B&W Gooseneck Hitch # BWGNRK1394 Fit 2001 Dodge Ram 2500 with 8-Foot Bed

Question

Question:

Will this hitch fit a 2001 dodge ram 2500?

asked by: Tim

0

Expert Reply:

The B&W Gooseneck Hitch # BWGNRK1394 that you referenced is a confirmed fit for your 2001 Dodge Ram 2500 with 8-foot bed.

For a wiring harness you can use # HM42137 from Hopkins.

expert reply by: Adam R

0

Answer 1

The Pack'Em Rack for Open Utility Trailers part #PK-6-OP1 does not come with any of the added accessories shown on the product page (i.e. cooler, leaf blower, lawn trimmer). The accessories are included in the photo to give customers a better…

view full answer...

Answer 2

I attached two pictures that shows what the harness on your 2001 Dodge Ram 2500 will look that you'll plug the #C57300 into. The first picture shows the connector without the cap on it, and the second shows it with the cap removed.

view full answer...

Answer 3

For your 2001 Ford F-250 Super Duty you will need the Ford OEM Tow Package Wiring Harness, #118243. This harness plugs directly into the standard OEM connector shown in your picture and fuses and relays are included. I have attached an installation…

view full answer...

Answer 4

Yes, the Curt Universal Fifth Wheel Base Rails #C16200 are the correct rails for your 2002 Dodge Ram 3500. These rails are the industry standard rails that will fit your RBW 5th wheel hitch that is designed to fit the industry standard rails. I do…

view full answer...

Answer 5

Yes, the Pollak Black Plastic 7-Pole RV Blade-Style Trailer Socket - Vehicle End, #PK12-707E, will work to replace the Pollak wiring socket that is broken. The insert will allow you to simply disconnect the wires and reconnect them inside the outer…

view full answer...

Answer 6

I was able to find an image which shows the Pack'Em Rack #PK-6-OP1 mounted on an outside of a utility trailer in a similar fashion to how you are wanting yours mounted. You can see they mounted the uprights to supports they have to for the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Hey Ron, congratulations on the new trailer! I have a Jay Feather myself and love it. You're definitely off to a great start with a weight distribution hitch, it will make a world of difference towing that trailer with your F-150. The Weigh Safe…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Will B&W Gooseneck Hitch # BWGNRK1394 Fit 2001 Dodge Ram 2500 with 8-Foot Bed

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching