Needing a 6-Way to 7-Way Adapter for an RV with a 6-Way Pin to Connect a Race Car Trailer
Updated 04/02/2015 | Published 04/01/2015 >
Products Featured in This Question
Question:
I recently bought 1 1997 Holiday Rambler motor home. It has a 6 pin square plug that I need to adapt to a conventional 7 pin so I can install a brake controller and connect to my race car trailer. I do not see an adapter offered to help. It seems as though I have to take it from the 6 pin square to a 4 pin flat then to the 7 pin? Seems silly. Any advice?
asked by: Dan F
Expert Reply:
I have a couple solutions for you, but the adapter you are looking for doesn't currently exist. The square 6-way style connectors are an older style that really aren't used anymore.
Your best bet is to replace the 6-way on your Holiday Rambler with a standard 7-way like # HM40975-11998. To install this, remove the wires from your current 6-way and splice the wires together by function. Use a circuit test like # PTW2993 to test the wires on your Rambler because it's likely the colors won't match up to the 7-way # HM40975-11998. I have attached a picture of the color code on this 7-way.
To install a brake controller, you will want our brake controller wiring kit # 5506 and most likely another 30 feet of 10 gauge wire like # 10-2-1. You will need that wiring kit and extra wire to run the wires for a brake controller from the 7-way connector to the cab of your Rambler for the brake controller. For a brake controller, I recommend the Prodigy P3 # 90195 because it has a LCD display and it's one of our most popular brake controllers we currently offer. I have attached a helpful article about installing a brake controller from scratch.
If you don't want to remove your 6-way connector on your Holiday Rambler and would rather keep it as factory as possible, another option you have is to use the adapter # C58034 and cut off the end that plugs into the trailer and connect wires to a 7-way socket like # PK12-707E. It's important the wires are connected to the correct pins by function, not by color. I attached a wiring diagram for a 7-way trailer connector for you.
If you go this route, you will still need the additional 30 feet of wire # 10-2-1 and wiring kit # 5505.
Product Page this Question was Asked From
7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring - Vehicle End
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- No Tow Package
- 4 Flat
- 7 Blade
- Plug Only
- Hopkins
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: 2-1/2" Hitch Receiver Extension that Reduces to 2" Receiver
- Q&A: Recommended Hitch and Wiring Harness for a 2025 Bronco Badlands
- Q&A: 4-Flat Wiring Harness For 2026 Hyundai Tucson Hybrid
- Q&A: Does the Curt C44FR Fit a 2026 Chevy Equinox?
- Q&A: Recommended 5th Wheel Rails and Brackets for a 2025 Chevy Silverado 2500
- Q&A: Trailer Hitch and Wiring for 2025 Chevrolet Equinox
- Q&A: Will Curt T-Connector Vehicle Wiring Harness Fit 2025 Chev Equinox EV LT Without Factory Tow Package
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)






