Recommended Bearing Kit for a 2001 Coleman Santa Fe Pop Up Camper

Updated 03/25/2015 | Published 03/24/2015

Question:

I would like to know what bearing kit I would need for a 2001 Coleman Santa Fe Pop up Camper.

asked by: David C

Helpful Expert Reply:

To determine the correct parts for your 2001 Coleman Santa Fe pop up camper, you will have to remove the hub from the camper and either get part numbers from the inner and outer bearing, and grease seal or measure the spindle in 3 places and the hub in two places. Since there are quite a few combinations of axles and hubs around, we want to be certain we are recommending the right bearing kit for your trailer.

I have included a photo showing the places to look for part numbers and places to measure. If the part numbers are not visible on your bearings and seal a dial or digital caliper will be needed to get accurate measurements.

I am including links to a FAQ page and a video that will help you when replacing the bearings, races, and seals on your trailer.

If you wish to provide your existing bearing, race and seal part numbers, and confirm your axle capacity, I can research the appropriate replacement parts for you.

expert reply by: Chris B