Which Trailer Hub and Drum Assemblies Fit a 5200 Pound Timbren Axle-Less Suspension System
Updated 03/02/2015 | Published 02/28/2015
Products Featured in This Question
Question:
I currently have 4inch axles with 5x4.5 hubs with electric brakes. Will thesend axles work with my current hubs and electric brakes?
asked by: Dan
0
Expert Reply:
If your current hubs use inner bearing 25580 and outer bearing LM67048 then you can use the Timbren Axle-Less suspension system # ASR5200S01. It will accept brakes that use the 5 hole mounting pattern such as # 23-325.
If you have different bearing numbers let me know what they are and I can determine if we have any Axle-Less systems that will work for you.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 5,200 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- 5200 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: How To Convert Mobile Home Hub To Common Trailer Hub
- Q&A: How to Determine Hub and Spindle Size
- Q&A: Is There a Replacement Spindle For a Dexter D44, 4400LB Trailer Axle?
- Q&A: Upgrading from a 3,500 Lb to a 5,200 Lb Axle On a Trailer with 80-1/2 Inch Hub Face Length
- Article: Most Popular Wheel Bearings
- Q&A: Does etrailer Anti-Rattle Hitch Collar Work With Weight Distribution
- Q&A: Can The etrailer Trailer Axle with Idler Hubs # e65GR Be Mounted Below the Leaf Springs?
- Q&A: Replacement for 3,500 lb Axle With 92-1/2 Inch Hub Face Measurement
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: No Missteps Here: Best Camper and RV Steps (2022)
- Article: How to Measure for Trailer Hitch Drop