Mounting Hole Dimensions of the Pollak 6-Pole # PK11609

Question

Question:

Can you dimention the sizes of the the rear diameter and screw holes for mounting in a hitch that already has holes drilled?

asked by: Page

0

Expert Reply:

I pulled a Pollak 6-Pole # PK11609 from our warehouse and found that the mounting holes are 2-3/4 inches apart and the diameter of the tube on the back of the connector is 1 inch.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Hey Mike, for a 6-way mounting bracket you could use with the Pollak 6-way part #PK11609 you'd want the part #C92CR. What vehicle are you flat towing?

view full answer...

Answer 2

There is a difference between a 7-way round and and 7-way rv blade connector. If you take a look at the accompanying photo, which is from our linked article on trailer wiring you can see that the connector on the left has blade-style pins while the…

view full answer...

Answer 3

I have added a photo detailing the wiring connections for the Pollack Heavy-Duty, 7-Pole, Round Pin conncetor, #PK11700, see link. This is a SAE J560 compliant connector. The wiring diagram for the vehicle side connector, #PK11720, is pictured also.…

view full answer...

Answer 4

Hi Edward, thanks for reaching out. This is a good question, and you’re thinking about it the right way. GM requires the battery to be disconnected when flat towing vehicles like your Suburban because the electronic parking brake can self-activate…

view full answer...

Answer 5

Hello Tom, thanks for reaching out. We do have the Demco Air Force One Supplemental Braking System for Tiffin Chassis Motorhomes part #DM55MV. This kit includes the parts needed to install the Air Force One on your Jeep as your Tiffin chassis has the…

view full answer...

Answer 6

The Second Vehicle Breakaway Kit for Blue Ox Patriot Supplemental Braking Systems #BRK2505 is designed to work with the Blue Ox Patriot BRK2012 (NLA), Patriot II BRK2010 (NLA), BRK2016 (NLA), or the Patriot 3 BRK2019 (NLA). Unfortunately, this will…

view full answer...

Answer 7

Hello Roy, Looking to swap to disc brakes, you will not be disappointed. Pairing that with the Roadmaster Comfort Ride system makes a huge difference in both braking performance and overall ride quality, especially with a fifth wheel like your…

view full answer...

Answer 8

Hey Lisa, I attached a picture that shows everything that comes with the Roadmaster Falcon 3HD Tow Bar #RM27NQ but it does not come with safety cables. Basically it comes with a hitch pin and a couple pins for attaching the tow bar to a base plate…

view full answer...

Answer 9

Hi Edward, what exactly do you mean by a hitch riser? Do you mean a high-low adapter like #RM-048-10? Can you email me a picture? The Roadmaster Falcon 3HD Tow Bar #RM27NQ is a great option with channels for cables. It will connect to any 2"…

view full answer...

Answer 10

As long as the 5,000 pound capacity for the Curt Single Hook Safety Cables #C80151 meets or exceeds your trailer's weight then they will indeed meet any local requirements with regards to safety chains or cables when towing. These cables have a…

view full answer...

Answer 11

The diagram you attached shows a 7-way wired up in what is considered the "traditional way." If you check out the chart I attached you will see the three ways (really only 2), that a 7-way can be wired. The Featherlite is wired up like the…

view full answer...

Mounting Hole Dimensions of the Pollak 6-Pole # PK11609

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching