Brake Controller Recommendation for 2013 Ford E250 Cargo Van
Updated 01/13/2015 | Published 01/12/2015
Products Featured in This Question
Question:
Im looking at electric break controllers on your website. When it says with factory 7 way does it mean that if my vehicle already has the 7 way trailer adaptor already? Im trying to install a controller on a 2013 ford E250 super duty extended cargo van. I also plan to install the 7 pin receptacle. I was hoping that I could get the wiring attachment which I have already identified. I was looking at controllers on your site. I already have one but would be willing to get a better one that the cable will adapt to. I dont need anything fancy just basic and effective. looking forward to your comments.
asked by: Terry C
Expert Reply:
With Factory 7-Way means your vehicle already has a 7-Way connector at the rear of your vehicle.
It sounds like your 2013 Ford E 250 Cargo Van is not equipped with a tow package, so you will need to start by installing a 4-way connector like the Curt T-Connector Vehicle Wiring Harness, # C56020. This connector plugs directly into your existing wiring with no cutting or splicing required.
Next you will need a 7-way connector. The Universal Installation Kit, # ETBC7, kit includes the wiring and accessories needed to install the 7-way connector and a trailer brake controller in your cargo van.
For a brake controller I recommend the Tekonsha Prodigy P3, # 90195. The P3 is a proportional controller which activates immediately and in proportion to the brakes in the van.
To connect to the brake stop light switch in the van, you will need to use a circuit tester like part # PTW2993, to locate the wire that carries a signal only when the brake pedal is engaged.
I have attached a few videos and an article for you as well as the installation instructions.
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How Does Brake Controller Install in Tiffin Phaeton 40AH
- Q&A: Comparing Aluma-Tow Adjustable Ball Mount To B&W, etrailer, and Trimax
- Q&A: Recommended Trailer Wiring and Brake Controller for a 1999 Dodge Ram 2500
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Can Redarc Tow Pro Liberty Brake Controller Install 2012 Toyota Sienna LE
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: How To Tell Apart 5,200 lb, 6,000 lb and 7,000 Axles
- Q&A: How To Turn Off The Tekonsha Prodigy P3 Brake Controller # 90195
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Determining Trailer Tongue Weight
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: 5 Things to Know About Weight Distribution Hitches