Dimensions of Ultra-Fab 5th Wheel King Pin Lock and Sleeve

Question

Question:

Hi what is the Length of this lock? Thanks

asked by: Lee

0

Expert Reply:

I went out to the warehouse and pulled the Ultra-Fab 5th Wheel King Pin Lock, # UF48-979008, and took some measurements for you.

The length of the sleeve is 3 inches. The overall diameter of this sleeve is 3-1/4 inches. Check out the image of this part showing the dimensions as well as a video review at right.

expert reply by: Chris O

0

click to enlarge

Answer 1

The MasterLock #ML387 is made from high grade aluminum and weighs roughly 7-lbs. You won't have any issues fitting this lock over a king pin with a lube plate either, since it does leave some room at the top and doesn't sit flush against the…

view full answer...

Answer 2

The Trimax King Pin Lock #TMX56RR can still be used with your 5th wheel having a capture plate from PullRite. The capture plate mounts to the top of the kingpin and only takes up a similar amount of space that a Lube Plate #RP83002 would. If you…

view full answer...

Answer 3

Since the Trimax #TMX56RR did not fit, I recommend taking a look at the etrailer 5th Wheel King Pin Lock #e98896. I like this lock because it is designed to be universal, and will fit virtually any pin box with a standard kingpin. The collar of the…

view full answer...

Answer 4

I recommend the Trimax King Pin Lock for 5th Wheel Trailers in Red #TMX36RR or Yellow #TMX56RR. The bright colors allow you to easily see it is in place and helps to deter would be thieves. They both have a tamper resistant lock and fully incase the…

view full answer...

Answer 5

Other than removing the lube plate (which you understandably don't care to do), if I were in your situation, I'd use an angle grinder to take a small amount of material off of the sleeve of the #UF48-979008 king pin lock to reduce its height.…

view full answer...

Answer 6

Good morning Michael I can definitely point you in the right direction. There are a few different Extang covers that fit the 2018 GMC Sierra 1500 with the 6.5' bed. Generally, we like to get a model number or serial number from the cover which we…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

To install a brake controller on your 2017 Chevrolet Silverado 1500 LT 4x4, you will just need the vehicle specific plug-in adapter. These adapters are usually brand specific. For example, if you go with the Tekonsha Prodigy P3 brake controller,…

view full answer...

Answer 10

Hello Oscar, thanks for reaching out. We have exactly what you are looking for. The 30153 you mentioned are universal industry standard 5th wheel base rails. We sell this exact rail set as part #RP30153. This comes with both rails, and all of the…

view full answer...

Answer 11

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Dimensions of Ultra-Fab 5th Wheel King Pin Lock and Sleeve

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching