Yes, the AMPLock King Pin Lock for PullRite and Sidewinder 5th Wheel Pin Boxes # AMP87FR will work with your Turning Point pin box. It has a cutout to accommodate your wedge as well so that you don't have to remove it to lock up the king pin.
view full answer...
There are king pin locks, yes, and the best option for the most protection is one from Master Lock:
- MasterLock High Security King Pin Lock # ML387
The # ML387 won't shear from bolt cutters and totally encompasses your king pin for complete security. Put this on your king pin and your 5th wheel trailer is absolutely going to stay put. view full answer...
The Buyers Products 2" King Pin Lock # 337KPL200 is made overseas per my contact at Buyers Products.
For a king pin lock that's made right here in the US I recommend checking out the Blaylock EZ Lock King Pin Lock for 5th Wheel Trailers # BLTL-70-40D. This has a nice aluminum construction so it's going to resist the elements plus you can use the included Master Lock padlock for some of the other various Blaylock applications as well. view full answer...
The best option we have for a king pin lock that will work on a pin box with a capture plate/wedge installed is the AMPLock King Pin Lock for PullRite and Sidewinder 5th Wheel Pin Boxes part # AMP87FR. I have attached a video I did below. view full answer...
The MasterLock # ML387 is made from high grade aluminum and weighs roughly 7-lbs. You won't have any issues fitting this lock over a king pin with a lube plate either, since it does leave some room at the top and doesn't sit flush against the pin box. I've attached one of our customer photos that shows this installed. view full answer...
I went out to the warehouse and pulled the Ultra-Fab 5th Wheel King Pin Lock, # UF48-979008, and took some measurements for you.
The length of the sleeve is 3 inches. The overall diameter of this sleeve is 3-1/4 inches. Check out the image of this part showing the dimensions as well as a video review at right. view full answer...
The Blaylock EZ Lock King Pin Lock for 5th Wheel Trailers - Aluminum # BLTL-70-40D has a measurement from the king pin step to the top of 1/2 inch. As long as your capture plate allows that clearance, it will be compatible. view full answer...
In order to secure a fifth wheel trailer you can use the Blaylock EZ Lock King Pin Lock for 5th Wheel Trailers part # BLTL-70-40D which attaches to the bottom of the kingpin and would then prevent anyone from being able to couple the trailer without first removing the lock. Please note, you will need to have the kingpin coupler block removed from the pin box but there is not an alternative as they do not offer a lock that will work along with this. If you really wanted to step up security... view full answer...
The MasterLock High Security King Pin Lock, Item # ML387, is not compatible with your Big Tex Gooseneck Trailer. The MasterLock is for fifth wheel trailers and will not work with gooseneck trailers. We do have some gooseneck locks like the the Blaylock EZ Lock Gooseneck Coupler Lock, Item # BLTL-50-40D, that will work if you have a Bulldog, Stallion, Superior, or T.E.M. coupler.
If this will not work for you, let me know which coupler you have and I will look for other options.
view full answer...
Based on my research, the Masterlock High Security King Pin Lock, part # ML387, will work for your trailer. As long as the king pin on your 2015 Keystone Alpine 3010RE is a standard 2 inch diameter king pin, the # ML387 will work well for you.
I have attached a review video of this lock for you. view full answer...
The etrailer.com 5th Wheel Trailer King Pin Lock comes with keys that are specific to each individual king pin lock, so you don't have to worry about someone using his King Pin lock key to open yours.
I have linked you to a product demonstration video for the # e98896 that you might find helpful. view full answer...
We can offer you several choices in a 5th wheel king pin lock that can be ordered in multiples that are all keyed alike but Master Lock King Pin Lock # ML387 is not among them.
We offer our aluminum King Pin Lock # e98896. It can be ordered in any quantity you need with all locks keyed to the same key. Just select the keyed alike option from the drop-down menu tool and then select your quantity. There is a modest charge for this service. view full answer...
Both the cast collar and the lock included with the etrailer.com 5th Wheel Trailer King Pin Lock, part # e98896, are manufactured in the USA. I have confirmed this with the manufacturer. view full answer...
The # e98896 that we offer is available in keyed alike multiples.
I have linked you to a product demonstration video that you might find helpful. view full answer...
Other than removing the lube plate (which you understandably don't care to do), if I were in your situation, I'd use an angle grinder to take a small amount of material off of the sleeve of the # UF48-979008 king pin lock to reduce its height. If you were to take about 1/8 of an inch off the height of the sleeve, it will work just fine with a lube plate. view full answer...
The etrailer.com 5th Wheel Trailer King Pin Lock # e98896 cannot be ordered with a specific lock number to match what you currently have. What you can do if you want all of your king pin locks keyed alike is order order as many as you need of this lock and select the "Keyed Alike" option on the drop down box.
I have added a link to a video review of this lock for you to check out as well. view full answer...
The etrailer.com 5th Wheel Trailer King Pin Lock, part # e98896, is a collar that is designed to lock around the king pin of your fifth wheel trailer. It is to prevent somebody from hooking up to your fifth wheel trailer. view full answer...
There is a lock that will work for your Sidewinder, but the collar on the Blaylock EZ Lock King Pin Lock # BLTL-70, though the Blaylock's collar is going to interfere due to the design; if you take a look at the accompanying photo you can see how close the wedge and king pin are.
Instead, I recommend the Master Lock 5th Wheel Trailer King Pin Lock # e98896.
The reason why is the # e98896 will fit around the king pin and not interfere with the wedge on a Sidewinder. view full answer...
We do offer replacement keys for the etrailer.com hitch and coupler locks. You will need to determine the key number from the lock which is usually a zero followed by 2 numbers, then you can search it or ask for help again. If you can't find a key number, you would need to buy a new lock. You can order an extra key with your new lock or have multiple locks keyed alike.
.
view full answer...
Yes, the Reese Revolution pin boxes are compatible with the Master Lock 5th Wheel Trailer King Pin Lock # 2999DAT. The Revolutions use standard size king pins like what this is designed to be used with. view full answer...
Ultra-Fab 5th Wheel King Pin Lock # UF48-979008 is designed to fit the industry standard 5th wheel king pin size so I have no doubt that it will fit your trailer. I have included a link to a video review for you. view full answer...
The Master Lock king pin lock # 2999DAT simply goes around the thinner part of the 5th wheel trailer king pin. Then you put the pin through and push on the lock. Take the look at the picture I have included to see how it installs. I have also incldued a link to all the king pin locks that we carry. view full answer...
The Master Lock # 2999DAT king pin lock you referenced will work just fine on the king pin of your Reese Sidewinder. The Sidewinder uses a standard king pin, and the wedge will be far enough rearward of the king pin that it won't interfere with installing the lock. view full answer...
Semi-truck king pins and 5th wheel king pin's typically are not the same size and the Blaylock # BLTL-70-40D is designed for use with 2" diameter 5th wheel king pins. If your semi trailer does not have a larger 3-1/2" king pin then you could use the Blaylock # BLTL-70-40D to secure your trailer. view full answer...
Go To Results