We have actually run into this issue quite a few times in the past, and there is a simple fix. The reason the Curt Echo Wireless #C51180 locks up the brakes on your camper only at low speeds is due to it being paired incorrectly, usually plugging in…
Thule offers their Adapters #TH58BV which will allow you to secure your 12mm x 100mm axle on the FastRide Roof Bike Rack #TH95JV. If you have a different roof mounted bike rack please let me know which model you have so I can verify if this adapter…
You can definitely use a hitch extender with the Thule Apex Swing XT, part #TH9027XT. The Apex Swing XT has 7-1/4" of clearance from the center of the hitch pin hole to the closest part of the rack. So, you only need about 7" more inches of…
Depending on the type of tire chains you have, you may be able to add a few links on the inside to better fit your wider tires. As long as you have the proper tools and make sure the added width and links don't interfere with the truck's…
When the LED light on the Curt Echo part #C51180 does not illuminate that means the brake controller is not getting power from the 12V pin or the ground is bad. On a 7-way trailer connector, the 12V power function does not need to be connected for…
If you have the Rhino Rack RVP #RR98TB roof rack on your 2017 Kia Sorento then you will have 220lbs of capacity with the bars. Make sure your roof of the Kia can handle that weight as well. You can find this in your vehicle's owners manual. As…
Yes, the Demco coupler part #DM16680-52 is safe to use on a 31 foot air stream trailer like you have. Bolting on and welding on coupler is both perfectly safe to do. I would agree bolt on is easier in a sense but if you have a welder that route would…
The big difference between the two couplers you mentioned is that the Demco #DM13205-95 does not come with chain anchors and the part #DM16680-52 does.
An electric a-frame tongue jack like the Lippert Electric Trailer Jack with Footplate part #LC285318 can indeed be rotated however, you would not be able to align the jack exactly 180 degrees as the mounting holes would not line up as you mentioned.…
Hello Marilyn; I do have a solution for you. We have the Curt Heavy Duty Forged Ball Mount #C53JR which is for a 2" hitch, has a 6" drop and a 2-5/16" ball. This is a heavy-duty forged ball mount and is rated for 15,000 lbs. If you…
The first thing I would check is that there is sufficient power to the jack. Use a multimeter and probe the power wire just before it enters the motor. If you get 12 volts then this is not the issue but if you don't then you need to trace the…
