See what our Experts say about this Optronics Work Lights

• How do the Wires of the 3" x 5" Rectangular Tractor and Utility Light part # TL35FS Route
  The 3" x 5" Rectangular Tractor and Utility Light part # TL35FS does not have a hollow stud for routing of the wires. If you check out the picture I attached you will see that the wires run from the back of the light assembly.
  view full answer...
  
• Replacement Light Bulb for Optronics Rectangular Tractor and Utility Light
  The Rectangular Tractor and Utility Light # TL35FS uses a 12V 55W H3 Halogen bulb like # VX-SDH3.
  view full answer...
• Utility Flood Lights for Use on Tractor When Plowing Snow
  If you want the highest light output for a given power input, then I suggest you go with LED-type lighting. LED lights will cost more up front, but they provide roughly 10-times the efficiency of standard incandescent lights, generate less heat and they avoid the need to keep replacement bulbs on hand. The linked page will show you all types and styles of utility lights and you can click on the filters on the page to select the shape, mounting method and bulb type you prefer. You can also...
  view full answer...
• Replacement Bulb for 3" x 5" Rectangular Tractor and Utility Light w/ Flood Beam, 2 Wire # TL35FS
  The 3" x 5" Rectangular Tractor and Utility Light w/ Flood Beam, 2 Wire Item # TL35FS uses a 12 volt, 55 watt H3 Halogen bulb # VX-SDH3. This is the whole bulb assembly. The bulb alone cannot be replaced since it is permanently mounted to the assembly.
  view full answer...
• Recommendation for a Flood Light Intended for Outdoor Use
  The Custer High Performance Utility Light, # S072, can be used for outdoor applications, such as to illuminate a truck bed. It will cover an area like a truck bed. This light works on a 12 volt system and uses a 55 watt H3 halogen bulb. A better option for a flood light would be # TL35FS, which can be used outside. Or you can use # TL46FS.
  view full answer...
• Dimensions of Optronics Utility Work Light
  I would be happy to provide you with the dimensions of the # TL35FS Optronics Utility Work Light - Incandescent - Flood Beam - Rectangle - Clear Lens. The measurements you are looking for are 6-5/8" long x 4-5/16" wide x 3-13/16" deep. The light face measures 5" long x 3" tall. I have attached a video review of the light for your reference.
  view full answer...
• Is the Oval LED Trailer Utility Light a Flood or Spot Light Style for Interior Trailer Lighting
  The Oval, LED Trailer Utility Light, item # BUL78C3MB, is designed as an area light, more like a flood than a spot light, and would be a good choice for interior lighting in an enclosed cargo trailer. The Straight 3-Wire Pigtail, item # A45PB, can be used for wiring this light. This LED light could be spliced into the tail light circuit, so the lights can be activated with the vehicle tail lights. A switch inside the trailer would be needed so that the lights are not on when traveling down...
  view full answer...

Do you have a question about this Work Light?