Replaces the valve for your RV's black-water tank. 3" Diameter passage allows wastewater to travel freely when valve is open. Valve body, seals, nuts, and bolts included.
Features:
To install, remove the broken waste valve and seals from your black-water tank. Then place the included seals on the flange fittings and position the new valve body. Tighten the provided hardware to complete installation.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Valterra Bladex Waste Valve. This is a three inch valve. It's going to allow you to replace, repair, or upgrade to a new dependable valve. It's got a metal handle right here on top. Very strong, durable design. You shouldn't have to worry about that ever breaking.
That's going to sit on top of a stainless steel shaft that's going to be strong and durable, as well as highly resistant to rust and corrosion. Now, these valves are interchangeable with most other brands. It's going to include the valve, the seals, the nuts and bolts for your full installation. The seals are made from a santoprene construction that's designed to resist chemicals and corrosion. Now, when you're ready to install the unit you'll need to remove your old valve and seals. Place the new seals over the lip of the existing flanged fittings. Insert the new valve, being careful not to dislodge the seals.
Then, tighten everything down for your full installation with the included hardware. A few measurements to go over with you real quick. I do want to mention just how easy of an operation it offers. Really nice design. Allows you to easily open and close the unit. You've got the T-grip handle right here and it just operates really nice and smooth.
Now, the overall length of the unit with it in a closed position is going to be about nine and a half inches. With it open we're looking at about twelve and three quarters of a inch. The width is going to measure about four and three eighths of an inch. Then, it's got four mount holes that's going to be a square pattern, so the distance that we have between each hole, measuring on center, is going to be about three and three quarters of an inch. That's going to be the same separation between each hole. That's going to do it for today's look at the Valterra Bladex Waste Valve..
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.