To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we will be taking a look at the Inno roof rack system for factory track rails. The stays are available with part number INTR and the bars are available in a variety of lengths. See our website for the length that will work best for you. The Inno roof rack system is going to allow us to carry Inno as well as other accessories on top of our vehicle such as kayak carriers, roof mounted cargo baskets, and bike racks. The square profile crossbars are made of a hardened steel with an elastomeric coating and they come in eight lengths ranging from forty-two to sixty-five inches. The crossbars come in a pair including the end caps to keep grime and debris from getting inside.
The crossbars are held in place by Inno's versatile stay. Now this particular model is designed to fit on the factory track rail systems. The stays also feature a locking mechanism which is designed to cover up our hardware, that way it can't be tampered with. Now this Inno roof rack system has a max weight capacity of a hundred and forty pounds, but keep in mind it's going to be limited to your vehicle's roof capacity which you can find in your owner's manual. Now Inno recommends a crossbar spread between nineteen and five-eighths inches and thirty and three-eighths inches. You can adjust these depending on your load length. Now that we've gone over some of the features, I'll go ahead and show you how to put it together and install it on our vehicle.
We've already got the rear in place so we can go ahead and finish this one. We've got our crossbar, we've got our two stays designed to fit with our factory track rail, and then we've got our fit hooks that are specifically designed for our vehicle. You can find your specific vehicle on our website at etrailer dot com. So first thing we'll do is we'll grab one of the stays. We'll take our keys and we're going to need to remove the cover. That's going to reveal where our hardware goes.
Then we'll take this portion of our fit hook and put it underneath and then we're going to take two screws. We will want to line it up with the holes there of course. We'll take two screws, put those through the top just to keep it in place. So it'll look like that. Then we'll take one of the hooks, we'll put it underneath and go ahead and screw that on a little bit.
Now when it fits into our track rail, on top of our vehicle, it's going to be in this position and I'll show you how this works when we get it up there. So let's go ahead and put this other hook in place. All right, then we can put the other one together. So now we'll take our stay with the fit hooks installed and then we're going want to set that on our track rail and it's going to sit on the inside and the outside portion of it. Then once we got it in there, we'll take our included Allen key and we'll tighten that down a little bit. We don't want to tighten it all the way down just yet but just enough so it's not going to come back out. Then we can repeat that same step on the other side. Now with those two stays in place, we'll grab our crossbar and we'll just feed it through meeting with the other side. We'll come over here and we'll finish receiving the crossbar. Now that we've got that slid in here, we'll need to make sure we have even bar overhang on both sides. So you can use a tape measure or your finger just to line up, just to make sure that it's even. I think that looks pretty good. Yeah. But before we tighten our stay down, we'll want to make sure we have equal crossbar spread on both sides. I've already had the rear in place, like I said before, and I've slid my stay all the way up to this panel here as far as it'll go which is making it twenty-eight inches which is what we're going with today. So then we'll take our included Allen key and tighten that down. Let's go ahead and put on our crossbar end caps then finally, let's install our cover. So we'll just slide that on, making sure that your key is in the unlocked position. Once it's in place, lock that up and then it's covering up our hardware. Now with our last cover on, our Inno roof rack system is installed and we're ready to start loading up some accessories. That's going to complete our look at Inno roof rack system for factory track rails.
Average Customer Rating: 4.8 out of 5 stars (143 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.For a roof with no mounts, this is a perfect choice! The fitment selected for me by etrailer.com for my 2012 Ford Escape was perfect. The Inno Rack System is easy to install (made easier by the use of etrailer.com's instruction video links). I chose the square bar fitment because I prefer the look over the various "aerodynamic designs", while I prefer the look over others, a wind fairing will prove to eliminate the very hint of sound that does emanate into the cabin. If you are looking for a Clamp mounted system that requires zero modification/easily removabl this is the system for you.
Product is great, pretty easy to install. Customer service was also great
Very clear directions, Easy to install and they look great!
Went on easy. Directions were straight forward and easy to follow. Equipment seems sturdy. I was missing the end caps for the cross bars but with a 3 minute phone call to customer service I had new end caps on the way. This is the second order I’ve placed with etrailer.com and I recommend them to everyone.
Great product easy to assemble easy to understand. Exactly what I needed for hauling my kayaks.
Awesome product. I’ve been looking for a while to find custom fit roof racks for my 2010 Dodge Caliber. the dealership told me I would have to drill them right to my car and the labour would’ve cost me a fortune. I’m so extremely happy that I found etrailer that had exactly what I was looking for! No drilling, and no hassle! The instructions were easy to follow and the assembly went smoothly ! Fast delievery and great customer service. I would 10/10 recommend etrailer to anyone who is looking for durable, stylish looking roof racks for a great price!
We needed a set of crossbars for our vehicle and read many reviews of other brands before finding this product. We like the bars and the installation of them. We needed something trustworthy to accomodate our rooftop tent and this fit our needs. We experienced excellent customer service!
Just installed the etrailer inno square load bars on my 4Runner. I also purchased the Round/square Crossbar Fit Kit . Looks great and mounted easily to my Prinsu Rack.
The roof rack itself is fine, the instructions to fit it are not that easy to follow. Once the details of the installation process were sorted out, it was not hard to fit and fits very well.
Howard - 05/10/2020Great product. Easy to install. This is one of three parts needed for a complete roof rack installation. Here is a photo of the finished installation on my 2015 Acura TLX sedan.
Installation is easy. Just follow directions. Front bar parts are different than rear bar parts so you need to look at part numbers and use in correct location. Rack is only rated for 100 pounds but looks and feels much stronger than rating. As noted square bars do create lot of wind noise when driving. Purchase this product to carry my Canoe and it does that at almost $200 less than other rack systems on market. For me the square bars are better fit with ratchet straps to hold Canoe down. Hard to find ratchet strap with hook to fit areo bars. Dislike. No way to level square bars. With car on level ground high point to high point on bars is level. But each bar is off by 1/8" front to back. Wish they were round bars.
So far so good! Was fairly easy to install. I will say the straps that came with it are not quite long enough for my kayak’s. Not an issue for me though. Overall I am definitely satisfied and would recommend for anyone that needs a rack for kayaks.
Great quality and easy fitment on my 2018 Chev Volt.
Installed great . Will see if they work well
Simple installation. Solid product. Excellent price. Top notch customer service. I'll be ordering other items for sure!
Was lost during shipping etrailer.com replaced it immediately!
I had been looking a very long time for a roof rack for my 2014 Jeep Grand Cherokee. I wanted round or tubular crossbars, different from the “air foil” style, which were the only kind available from the factory and the many imitators. I finally found etrailer, and these fit the bill perfectly. The attachments fit the rails just like the factory model, and hold the rectangular cross bars firmly. A sturdy and solid product. And even with free shipping they arrived the morning of the second day after I ordered them, in time for the trip I was planning to take with them.
Fit perfectly. Works great
Really solid bars and end caps, not much more to say!
Very nice stuff here...glad I went this way versus other more well known brands.
It fits perfect everything was nicely packed and everything showed up on time, I would definitely order from etrailer again, and I would like to add that the customer service was excellent
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.