See what our Experts say about this Camco Propane Fittings

• Replacement LP Regulator For Marshall 605H Regulator
  Thanks for the picture! To replace your Marshal 605H propane regulator you will need to go with the Camco Vertical 2-Stage Propane Regulator # CAM59313. This will be an exact replacement for your current regulator. I included a video review of the # CAM59313 for you to take a look at.
  view full answer...
  
• Recommended Replacement For A Marshall Brass Co, Model 230 605H LP Regulator
  We don't carry the Marshall line of regulators but you can replace your Marshall 230 - 605H regulator with the Camco Vertical 2-Stage Propane Regulator # CAM59313. From what I can find on the 605H it appears to be a dual stage vertical venting regulator so the # CAM59313 would be the appropriate replacement.
  view full answer...
• Recommended Regulator for 100 lb Propane Tank and Vent-less Heater Appliance for Emergencies
  For your propane tank with fill valve, you most likely need the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr # CAM59333. This will have the 1/4 inch NPt inlet and the 3/8 NPT outlet and will maintain a constant 11 inch water column propane pressure for your vent-less heater.
  view full answer...
• Recommended Replacement for a Marshall 290-1 Regulator
  Hey Kevin, to replace your Marshall 290-1 regulator you can use the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L # CAM59333 or you can use the # CAM59313 for a vertical regulator replacement. Both of these regulators are 2 stage, rated for 160,000 Btus, and maintains a constant 11" w.c propane pressure.
  view full answer...
• Can a Dual Propane Tank Regular be Used with Just One Tank
  Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks # CAM59005 has a valve on top that will automatically switch to a full tank so you could use it with one tank and it would just always be open to that tank. But if you will always be using one tank we have 2-stage regulators # CAM59313, # CAM59323, or # CAM59333 for a single propane source and they would be more ideal than the dual tank option.
  view full answer...
• 2-Stage Regulator for 100 lb Propane Tank and Ventless Heater
  For your 100 lb propane tank and 30,000 btu ventless heater you should use the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L # CAM59333 to maintain constant pressure. The inlet on this regulator is a 1/4" NPT connector and the outlet is a 3/8" NPT connector. I have added a link to a video review of this regulator for you check out as well.
  view full answer...
  
• Recommended 2-Stage Regulator for a 100 lb Propane Tank
  Hey Mark, thanks for reaching out! The Camco Horizontal 2-Stage Propane Regulator # CAM59333 is exactly what you need for your 100 lb propane tank because it has the POL connection on the end as opposed to a Type 1 connector used for a 30 lb tank. The 160,000 Btu/Hr actually means that's what this regulator is able to handle, instead of that being the output of the regulator. Pretty much any propane system will need a 2-stage regulator. The only time a single stage regulator is needed...
  view full answer...
• Do Propane Regulators Stop Working Well In Cold Weather
  Hey Steve, I would suspect the issue is the temperature of the propane tanks. When the temperature drops so does the tank pressure which might be why it's hard to start. If the tank is really full that will help offset that a bit but if you can make sure the tank is moderately warm I would be willing to bet that will make a big difference.
  view full answer...
• Looking for Horizontal Propane Regulator for 1992 Georgie Boy Class A
  Hey Shawn, we have horizontal propane regulators like the part # CAM59333 that looks similar to what you have. What about this regulator seems like it wouldn't work?
  view full answer...
• Recommended Propane Regulator for a 40 lbs and 100 lbs Propane Tank
  Yes, we do Brad! The Camco Horizontal 2-Stage Propane Regulator w/ P.O.L item # CAM59333 has the standard 1/4" NPT inlet and 3/8" NPT outlet like what a 100 lbs and 40 lbs propane tank would have.
  view full answer...
• Option For Replacing Old Regulator
  Hello Ken, thanks for getting in touch. A bad regulator would certainly explain the issue you described, especially if it is an older setup. The MB Sturgis regulator is a great option for a new 2 stage regulator, the right one just depends on how yours is mounted. For a vertical regulator use part # 108220, for a horizontal regulator use part # 108221.
  view full answer...
• Replacement 2-Stage Regulator for Marshall Model 260
  Camco part # CAM59333 will work as a replacement for your Marshall 260 Horizontal LP regulator. It includes a P.O.L. connector. If you do not need the P.O.L. connector then you can use the Camco Horizontal 2-Stage Propane Regulator # CAM59323. Your photo shows your regulator to be a horizontal type but you can confirm by verifying the the Marshall's vent opening faces down. Please refer to the linked video at the 20-second mark to see the vent on the Camco part.
  view full answer...
  
• Propane Regulator to Replace Marshall 605H Model 290
  We have what you are looking for but your regulator currently vents out of the bottom of the regulator and the one you referenced vents out of the side. So to match the correct orientation you'd want the part # CAM59313.
  view full answer...
• Which Regulator Should I Use With My 100lb Propane Tank To Power My Gas Fireplace?
  In order to use your 100lb propane tank with refill valve to fuel your fireplace you will want to check if you need a horizontal or vertical regulator. Vertical regulators are mounted upright and have the vent on the bottom, while the horizontal regulators are mounted sideways with the vent on the side of the regulator facing down. For vertical, go with MB Sturgis Vertical 2-Stage Propane Regulator - 11" Water Column Outlet # 108220 with MB Sturgis Hose Assembly # 100202. For horizontal,...
  view full answer...
• Replacement Horizontal Marshall 260 Propane Regulator
  Yes, the part # CAM59333 will work as a replacement for your Marshall 260 LP regulator. Keep in mind that it does have the P.O.L. connector included. If you do not need the P.O.L. connector then you will want to go with the Camco Horizontal 2-Stage Propane Regulator # CAM59323.
  view full answer...
• Recommended Replacement Regulator for a Marshall Gas Model 290-00
  Since your Marshall Gas Controls Model 290-00 is just a standard 2 stage regulator, you can just use the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L # CAM59333 as a replacement. From the picture it does look like you have enough room, but you'd probably have a better idea since the tank is in your possession.
  view full answer...
• Replacement Propane Regulator For a 2021 Forest River Rockwood Freedom Camper With Single Tank
  For your 2021 Forest River Rockwood Freedom 2318G camper with the single propane tank I recommend the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L # CAM59333. This will allow you to attach directly to the tank without additional hose pigtails needed. It will need to connect to a 3/8" NPT male supply hose into your camper. The 2-stage regulator is superior to the single stage to ensure that you have the correct pressure and volume going to your appliances.
  view full answer...
• Replacement Marshall 290 Propane Regulator
  The Marshall 290 model regulator is a standard vertical 2-stage regulator, unlike the horizontal Marshall 260 and Camco # CAM59333 that you mentioned. This means to replace your Marshal 290 you will want the Camco Vertical 2-Stage Regulator # CAM59313 instead. In terms of function and application this is essentially a direct replacement. I have attached a short video review that you can check out as well.
  view full answer...
• Replacement Regulator and Hose for 1992 Marshall M 260
  Thanks for the pictures! I have a better option for your setup based. It is the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr item # CAM59333. The Camco will work as a replacement for your Marshall 260 Horizontal LP regulator and it includes a P.O.L. connector. It has a 3/8" NPT inlet connector so you will need the MB Sturgis Propane Hose Assembly - 1/2" Female Flare Swivel x 3/8" MPT - 4' item # 100383-48-MBS.
  view full answer...
  
• Recommended Regulator to Use with 20 Pound Propane Tank and Clothes Dryer
  A single stage regulator like the Camco # CAM59013 should work nicely with your 20 pound tank. This unit is rated for 200,000 Btu/hr so you will just want to check the literature on your dryer to see if this will be sufficient. The regulator's inlet has a 1/4" female NPT connector and the outlet has a 3/8" female NPT connector.
  view full answer...
• Adapter Fitting Needed To Connect A Regulator To A Propane Tank
  Typically a POL fitting will connect to your RV's propane tank and RV regulators normally have a 1/4" NPT inlet so the Propane Tank Connector Fitting - Soft Nose POL x 1/4" Male NPT # 37207-30075 you were already looking at would be the correct adapter fitting. If you have a different fitting type on your regulator or propane tank and can't identify them then please send in some pictures and I can identify them for you. You are going to want to ensure that the vent on your regulator is...
  view full answer...
• Recommended 2-Stage Propane Regulator for Water Heater
  I suggest you use the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L , # CAM59333. This regulator maintains a constant 11" w.c. gas pressure, the 2 stages ensure a consistent flow.
  view full answer...
• What Propane Regulator Do I Need to Connect 100 lb Tank to My Range/Stove and Tankless Water Heater
  The regulator I recommend to connect your 100 lb propane tank to your tankless water heater and range/stove is the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr # CAM59333. I recommend this Camco because it is rated for 160,000 BTU per hour
  view full answer...
• Hose For Camco Horizontal 2-Stage Propane Regulator w/ P.O.L CAM59333
  The hose is going to depend on what you are using the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr # CAM59333 with. It has a POL fitting for the tank, and for the hose, one end will be 3/8" Male NPT to connect to the regulator, and the other end will depend on the fitting you need for your appliance. For example if you needed a 1/2 Inch - Female Flare fitting you could use the MB Sturgis Propane Adapter Hose - 3/8" Male NPT x 1/2" Female Flare Swivel - 4' # 100383-48-MBS. I...
  view full answer...

Do you have a question about this Propane Fitting?