Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces a lost or damaged blade on the 12-volt fan in your Ventline Ventadome RV roof vent for motor homes and enclosed trailers.
Features:
Specs:
This fan blade won't fit older, obsolete motors. If your Ventline roof vent has an older motor, it will have to be replaced along with the fan blade. To determine whether you have an old or new motor, measure the length of the motor from end to end (excluding shafts and mounting hardware, measuring just the case.) If the motor measures 2", it is an older motor and should be replaced with the fan blade. A new motor measures 1-1/2" in length.
Good replacement fan
Worked and fit just like it should.
Installed and working fine.
Easy to install and works well.
Received product within 5 days of ordering. Fast service. This product was just what I had been looking for. Thank You!
I have just unpacked the shipment, and have not had a chance to try to install the items, therefore can not make a valid judgement at this time.
The replacement part worked excellent, not much more I can say about a fan blade !!
I just installed one of these fans and am happy so far. The great information provided on etrailer.com helped ensure that I get the correct fan the first time, which I am very happy about, and their instructional videos are very helpful for those of us who have not replaced these parts before.
I live near Elkhart IN (RV capital of the world) and could not find the right part at the places I get parts from.etrailer came through like a champ for me . The right part at a fair price and fast shipping ( the box was crushed but the fan was unharmed).
The blade requires a different rotation from what the original blade was but that is not a problem as reversing the wires on the motor changes the directionor rotation on the 12v DC motor.
The picture of the motor and componets is correctly displayed as to what I received. At first I thought the metal plate was for a different mounting bracket as the mounting holes are spaced different for the replacement motor. This could not work as there is no hole for the motor shaft so I figured that the plate is for a hole drilling template to be able to properly drill two small holes in the vent cross bracket for attaching the new motor. I'm not sure what the extra screws were for.
All the items I ordered were shipped within 12 hours of when I placed the order and everything I received was exactly the items as described in the text and pictures.
Was exactly what I needed to repair my fan in the bathroom in my Rv was so easy thank u for ur help. Part arrived and was delivered in extent condition. I did need to drill out the small hole that the on the fan that fits on the motor shaft so it would go on the shaft more and not touch the screen but it was easy works great
After my 22 year old fan blade exploded itself this was a direct replacement that meant I didn't have to fiddle with fitting and wiring in a new fan motor. Was an easy and direct replacement. It's worked without an issue for the past year.
Easy installation
The correct replacement for this application and easy to install. It took longer to remove the screen than to install the fan that you simply push in place onto the motor spindle. Removing the old dried out piece took a minute to let WD40 help loosen it up.
Work fine and hope it lasts another 14 years.
Perfect fit for my bathroom vent. Ordering was simple and shipping was quick. I will order from them again.
Its great. Works fine. No other problem s.
Internet search for fan replacement parts got me an etrailer YT video including part numbers. Had done business with them before so ordered the parts. Quick delivery, exact replacement parts, good price, what could be better?
Perfect fit! Easy to install and works great!
Great service and prompt delivery. My items were sent to a friend in the USA who in turn forwarded them to me in Australia.
The items are as described and were a direct replacement for the original parts, both of which disintegrated on the same day - a pre programmed life span perhaps? Long hours exposed to our harsh sunlight played a major part in turning the fan blades brittle I expect.
Barry A.
5/14/2018
All good thanks.
This worked for my trailer's Ventline Ventadome. Had to replace the other one as it rotted away in the sun and broke into many pieces.
Plastic is sturdy.
Cody G.
3/31/2015
Still working! Simple plastic piece, I would hope so!
fan blade was a direct replacement, fast shipping reasonable prices.
cheap manufacturers product but it is all that is available, not etrailers fault!
James
10/22/2014
Although i have only used it 2 short times, it has worked great.
We ordered 3 vent fan blades, 2 fan switches, and 3 fan motors for our travel trailer. One set was to replace an existing vent fan motor and blades. The repair was straightforward and required no additional parts. The other two sets (blades, switch, and motor) were new installation in existing vents in a 2005 camper. We were happy to be able to find parts at etrailer.com that would fit the crossbars and vent screens currently in place so that we didn't have to change those out. We did have to go to an automotive supply store for wire connectors so that we could connect the new fans to the wiring in the ceiling. Our only concern is that the new motors attach to the mounting bracket with only one screw, and then the bracket attaches to the crossbar with only one screw. On the fan where we replaced parts, both the motor and the bracket are attached with two screws. We hope that the new fans will help us manage the interior temperature of the camper more easily.
The product itself is a direct replacement for the original Ventline fan blade. It installed quickly and easily.
Richard
2/6/2014
The replacement fan blade functioned perfectly after an easy install. Traded the trailer with replacement fan blade in May 2013.
I wanted a vent fan for my small RV bathroom, but didn't want to compromise the currently waterproof seal of the existing roof vent. So, I bought these pieces and made up a new plate to mount the motor to the existing metal crosspiece. I got power from the nearby ceiling light and mounted a pull chain switch in the ceiling. Not the easiest job in the world, but it beat tearing the old vent off the roof.
Re: the components - I only used the motor and wiring harness. The motor is surprisingly powerful, given its size and does a nice job spinning the fan blade. I think it will move quite a bit of air.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
3/27/2025
Hi-five on the DIY install! I always get so nervous when I have to drill something so I'm glad that it was an easy one :)