Spring-tensioned, zinc-plated steel snapper pin prevents your trailer's coupler from unlatching and releasing from your hitch ball. Pin measures 1/4" diameter x 2-1/2" usable length.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the quarter inch diameter Coupler Snapper Pin. Now, this snapper pin will prevent your trailer's coupler from unlatching and releasing from your hitch ball. It is a spring tension design. This creates a nice, strong hold. You can see to open it up, and you slide the pin through the hole in the coupler, and then take your clip and snap it back on top of that. It holds it in place.
It is a zinc plated steel, which is corrosion resistant.A few specs on this, the diameter is quarter of an inch and the usable length, which when it's closed is measured inside to inside, so in this one it's going to be right at two and a half inches. But again, just to show you, open it up, slide this through the hole in your coupler and then snap back into place. But that should do it for the review on the quarter inch diameter Coupler Snapper Pin.
Do you have a question about this Hitch Pins and Clip?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.