JR Products gas shock replaces 1 worn or damaged shock on your RV entry door or storage doors. Durable black-nitride finished gas shock measures 11.41" compressed, 20" extended, and has 10 lbs of force.
Features:
Specs:
When replacing gas shock on your vehicle or RV, you will want to make sure you are buying a replacement with the exact same extended length, compressed length, and pounds of force. This information is usually printed on the shock. Lengths are measured from the center of the ball joint used for mounting. If you are planning on installing gas shocks on something for the first time, identifying the shock you need requires fairly complex initial calculations, so be sure to do your research to avoid purchasing a shock that will not fit your application.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today. We're taking a look at this JR Products, 20 inch long gas shock. Now this is a quick and easy replacement for any worn or broken gas shock you may have. This will replace a gas shock on multiple applications like your RV or trailer doors, storage compartment doors, truck, bed covers, or fold down camper beds.It is designed with the nice high quality black nitride shaft includes the plastic ends with the locking clips to secure it to the mounting ball and the connection type one.
This is a 10 millimeter ball socket. It does easily install in minutes. There's no special tools required. Basically what I want to do is zoom in a little bit here, just so we can show you detail. Here's the ends of it.
And basically what you end up doing to get your old one off, you'll just slide a small flat tip screwdriver under the clip, pry that clip up and it'll release the pressure and you can pull it off the ball. And then when you go to install this one, just go ahead and pry that clip up. You don't have to pop the clip off, just pry it up enough to release the pressure in there, and then put that onto the ball, push your clip down and it'll attach just like that. And you'll do the same on the other end, just like that. Very simple installation.Now, when you do install this, they do want the inner rod facing down and then they also recommend to replace these gas shocks in pairs.
Now the extended length on this, it's extended like it is now from the center of the small socket to the center of this one is going to be right at 20 inches. That compressed length, if you would compress it, it would be 11.41 inches. And the output force on this gas shock is 10 pounds. But that should do it for the review on this Jr Products, 20 inch long gas shock.
Do you have a question about this RV Door Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.