New Arrivals

Black anodized aluminum hitch step slides into your 2" hitch receiver providing easy access to your truck bed, ladder rack, or roof rack. Textured surface helps prevent your feet from slipping. Includes anti-rattle bracket, hitch pin, and clip.

• Hitch Step
• Truck Bed Step
• Fixed Step
• Standard Step
• 6 Inch Deep
• 500 lbs
• 36 Inch Wide
• Aluminum
• Romik

Heavy-duty, 1-piece ball mount measures 8-1/8" from pin hole to ball hole. Use this Class IV accessory in either the drop or rise position to fit your application.

• Trailer Hitch Ball Mount
• Drop Hitch
• Fixed Ball Mount
• No Ball
• Steel Shank - Matte Black
• Drop - 4 Inch
• Rise - 2 Inch
• Class IV
• 7500 lbs GTW
• Reese

Ramp set lets you load a vehicle into your shed, barn, or truck bed. Wide rungs provide a smooth rolling surface. Each ramp supports 625 lbs for a combined capacity of 1,250 lbs. Cam-buckle safety straps included.

• Truck Ramps
• Trailer Ramps
• ATV Ramps
• Ramp Set
• Fixed
• 13 Inch Wide
• 1250 lbs
• Flat
• Aluminum
• Reese

Hook up your trailer with this ball mount for your 2" hitch. The black nickel finish adds a sleek touch, and the drop and rise help keep your trailer level. Strong, stylish, and ready for your next haul.

• Trailer Hitch Ball Mount
• Drop Hitch
• Fixed Ball Mount
• One Ball
• 2 Inch Ball
• Steel Shank - Gloss Black
• Drop - 2 Inch
• Rise - 1 Inch
• 7500 lbs GTW
• Pre-Torqued
• Reese

Durable steel ball has a 1-1/4" diameter x 2-3/4" long shank. ZincMax finish resists corrosion. Fine threads provide strong grip. Lock washer and nut included.

• Trailer Hitch Ball
• Trailer Hitch Ball
• Standard Ball
• Zinc-Plated Steel
• 2-5/16 Inch Diameter Ball
• 1-1/4 Inch Diameter Shank
• Class V
• 14000 lbs GTW
• Class IV
• Reese

Durable steel ball has a 1" diameter x 2-1/8" long shank. ZincMax finish resists corrosion. Fine threads provide strong grip. Lock washer and nut included.

• Trailer Hitch Ball
• Trailer Hitch Ball
• Standard Ball
• Zinc-Plated Steel
• 1-7/8 Inch Diameter Ball
• 1 Inch Diameter Shank
• Class I
• Class II
• 3500 lbs GTW
• Reese

Arched, aluminum ramps let you load your gear into your truck or trailer. S-curve design helps to prevent low-clearance equipment from bottoming out. Folds at the center for storage. Each ramp supports 750 lbs for a combined capacity of 1,500 lbs.

• Trailer Ramps
• ATV Ramps
• Truck Ramps
• Ramp Set
• Center-Fold
• 12 Inch Wide
• 1500 lbs
• Arched
• Aluminum
• Reese

Retractable tonneau for your vehicle has aluminum slats and a vinyl top layer that combine the strength and security of a hard cover and seamless look of a soft cover. It locks at any point along the rails, and it retracts easily with a handle.

• Tonneau Cover
• Retractable - Manual
• Not Rack Compatible
• Opens at Tailgate
• Built-In Lock
• Aluminum and Vinyl
• Matte
• Pace Edwards

Electric, retractable tonneau cover with T-slot rails lets you add a ladder rack or roof rack to carry all your sports and recreational gear. Durable aluminum cover locks at any point along the rails, and the matte black looks great on your vehicle.

• Tonneau Cover
• Retractable - Powered
• Rack Compatible
• Opens at Tailgate
• Built-In Lock
• Aluminum
• Matte
• Pace Edwards

Remote-controlled, retractable tonneau cover opens and closes in under 30 seconds. Cover locks at any point along rails, and it fits over most fifth-wheel hitches. Powder coated aluminum panels with silicon hinges provide superior water resistance.

• Tonneau Cover
• Retractable - Powered
• Not Rack Compatible
• Opens at Tailgate
• Built-In Lock
• Aluminum
• Matte
• Pace Edwards

Retractable tonneau for your vehicle has aluminum slats and a vinyl top layer that combine the strength and security of a hard cover and seamless look of a soft cover. It locks at any point along the rails, and it retracts easily with a handle.

• Tonneau Cover
• Retractable - Manual
• Not Rack Compatible
• Opens at Tailgate
• Built-In Lock
• Aluminum and Vinyl
• Matte
• Pace Edwards

You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can completely remove it just as quickly for full bed access. Aluminum and vinyl deck has strength of a hard cover and seamless look of a soft cover.

• Tonneau Cover
• Retractable - Manual
• Not Rack Compatible
• Opens at Tailgate
• Tailgate Lock
• Aluminum and Vinyl
• Vinyl Grain
• Pace Edwards

Retractable hard tonneau cover protects your cargo and truck bed. Heavy-duty aluminum panels and silicone hinges help seal bed. Cover locks at 12" increments along the rails, and retracts easily with a quick-release handle.

• Tonneau Cover
• Retractable - Manual
• Rack Compatible
• Opens at Tailgate
• Built-In Lock
• Aluminum
• Vinyl Grain
• Pace Edwards

You can install this retractable, hard tonneau cover on your vehicle in about 10 minutes, and you can completely remove it just as quickly for full bed access. Aluminum and vinyl deck has strength of a hard cover and seamless look of a soft cover.

• Tonneau Cover
• Retractable - Manual
• Not Rack Compatible
• Opens at Tailgate
• Tailgate Lock
• Aluminum and Vinyl
• Vinyl Grain
• Pace Edwards

Be seen with this 3/4" round LED. The red diode with clear lens is perfect for clearance or side marking and fits snug with the included grommet. Plug-and-play, 2-wire bullet connectors. Fully submersible - great for boat trailers! PC rated.

• Trailer Lights
• Clearance Lights
• Side Marker
• Rear Clearance
• Round
• Recessed Mount
• Submersible Lights
• 3/4 Inch Diameter
• Red
• Peterson

1-1/16" LED can be both a side marker and clearance light. It mounts with the built-in grommet. Plug-in installation with 0.180" bullet connectors.

• Trailer Lights
• Clearance Lights
• Rear Clearance
• Side Marker
• Round
• Recessed Mount
• 1-1/16 Inch Diameter
• Amber
• Peterson

Versatile 3/4" red LED works as a clearance, marker, or third brake light. Sealed, submersible housing is great for boat trailers. Installs with a rubber grommet. 3-wire setup with bullet connectors for easy hookup. PC rated.

• Trailer Lights
• Clearance Lights
• Side Marker
• Rear Clearance
• Stop
• Round
• Recessed Mount
• Submersible Lights
• 3/4 Inch Diameter
• Red
• Peterson

2-1/2" Diameter round. Waterproof, LED trailer light functions as both a clearance and side marker light. LumenX optics creates a solid panel of light. Recessed mount with black flange. Accepts industry-standard 2-prong plug. PC rated.

• Trailer Lights
• Clearance Lights
• Rear Clearance
• Side Marker
• Round
• Recessed Mount
• Submersible Lights
• 3-3/8 Inch Diameter
• Red
• Peterson

5-3/4" Diameter x 4-5/8" tall. Low-profile strobe light provides a 360-degree visual warning to drivers and pedestrians. 2 Flash flash patterns. Permanent mounts with built-in studs.

• Emergency Vehicle Lights
• Vehicle Lights
• Beacon
• Surface Mount
• LED
• Wired
• 2 Flash Patterns
• White
• Peterson

6-1/2" x 2-1/4" Waterproof LED displays brake, tail, and turn signals on your trailer. It mounts in a cutout with a grommet (sold separately) and works with AMP-style plugs.

• Trailer Lights
• Tail Lights
• Turn
• Tail
• Stop
• Oval
• Recessed Mount
• Submersible Lights
• 6-1/2L x 2-1/4W Inch
• Red
• Peterson

Stay visible and safe with this dual-purpose LED strobe and turn signal. The 36-diode light flashes as a bright amber strobe but automatically switches to a turn signal when activated. Works with 12V and 24V systems.

• Trailer Lights
• Tail Lights
• Turn
• Round
• Recessed Mount
• Non-Submersible Lights
• 4 Inch Diameter
• Amber
• Peterson

4-1/4" Round. Strobe light with rear turn signal function has 36 diodes and produces a 3-flash strobe pattern to alert others to the presence of your vehicle. Piranha Series combines modern design with vibrant lighting. Recessed mount.

• Trailer Lights
• Tail Lights
• Turn
• Round
• Recessed Mount
• 4-1/4 Inch Diameter
• Amber
• Peterson

2" Diameter round. Waterproof, LED trailer light functions as both a clearance and side marker light. LumenX optics creates a solid panel of light. Recessed mount with black flange. Accepts industry-standard 2-prong plug. PC rated.

• Trailer Lights
• Clearance Lights
• Side Marker
• Rear Clearance
• Round
• Recessed Mount
• Submersible Lights
• 2-15/16 Inch Diameter
• Amber
• Peterson

Be seen with this compact 3/4" round LED light for clearance or side marking. Fits snugly in a recessed mount with the included grommet and works with 12V and 24V systems. Fully sealed and submersible - great for your boat trailer! PC rated.

• Trailer Lights
• Clearance Lights
• Side Marker
• Rear Clearance
• Round
• Recessed Mount
• Submersible Lights
• 3/4 Inch Diameter
• Red
• Peterson