Peterson LED Strobe Beacon Light - Double Flash Pattern - 360 Degree - Clear - 12V/24V

Video Transcript for Review of Peterson Emergency Vehicle Lights - White LED Double Flash Pattern Strobe Beacon - PET29JV

Hi, everybody, Andy here with etrailer.com. Let's take a look together at this Peterson white LED double flash pattern strobe beacon light. Now, this strobe light is going to fit on your vehicle and it's going to give a warning signal to help increase safety. And a light like this is going to be great for towing vehicles, plowing vehicles, vehicles that are used on the transportation department for a town or city, warehouse vehicles, and even agricultural applications. Now, this does feature, as you can clearly see here, a double pattern flash, and it's displayed at 360 degrees. And let me go ahead and shut my lights off here in the studio real quick just so you can see what this is going to look like in low light or dark conditions.

Gonna go back out to the wide view, here. So, very bright. It's gonna be very effective as a warning beacon. Gonna go ahead and turn my studio lights back on, and then let me go ahead and disconnect the power, here, so I'm not gonna give you a headache, and we'll go back in for a closeup view, here. Now, as you know, LEDs are bright, they're long lasting, they're energy efficient.

This is made here in the USA. It's actually made in Grandview, Missouri. They're about a little over 200 miles west of us here in Wentzville. Has a polycarbonate white lens over white LEDs. And so, this is going to permanently install on the mounting surface of your vehicle.

You'll just drop these posts into the holes and then tighten it up with the included hardware, the washers, and the hex nuts. And then you'll tighten everything down until this rubber base seals the light on the surface of your vehicle. So, very easy installation. Let me go ahead and give you some measurements. I'm gonna go ahead and turn this upside down just to give you, that's gonna help me get an accurate measurement of the height.

Measuring from the top of the light to the base, we're sitting pretty close to 4 5/8" tall. And then, looking at the diameter, here, looks like we're right at about, right about 5 3/4" on the diameter. And let me see if I can give you the measurement of those mounting posts on center. Looks like we're right at 4" on center. The included wire, here, is going to splice into your 12-volt or 24-volt DC systems. This length of this wire is about 27" long. I measured it before our time together. And so, again, this is going to be a white double flash pattern strobe light, but we do have some other options here as well. We do have this light available in a single flash pattern. And then, we have amber versions, the amber double flash pattern and the amber single flash pattern. So, if you would prefer to take a look at those other options over this one, here, you can just take the appropriate part number that you see there on your screen, pop it in the search field of our website. That will take you to that particular light that you are looking for. Instructions are also included to guide you through the very easy installation process, but I think that's gonna wrap up our real quick look today. I do hope that our brief time together has been illuminating for you. Again, my name is Andy. Thanks for joining me.