New Arrivals | etrailer.com

Dexter Electric Trailer Brake for Dexter ABS Tow Assist - 12-1/4" - Left/Right Hand - 8K

Our Price: $919.98

Add to Cart

The best trips aren't about the miles, they're about how easy the ride feels. Swap in new ABS brake assemblies and your trailer will track steadier and stop smoother, so mountain grades, crosswinds, and sudden traffic don't rattle you.

Dexter Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal

Retail: $82.56

Our Price: $70.81

(2)

In Stock

Add to Cart

Dexter Grease Caps with 1.99" OD - Fits 7" and 10" Hubs - Zinc-Plated Steel - Qty 2

Our Price: $17.19

(1)

In Stock

Add to Cart

Protect your trailer's bearings from dirt and moisture with these 1.99" outer diameter grease caps. Zinc-plated steel resists rust, and the drive-in design fits 7" and 10" Dexter hubs. Includes 2 caps.

Dexter Bearing Kit for 1-1/16" BTR Spindle

Retail: $31.59

Our Price: $28.80

(3)

In Stock

Add to Cart

Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing and outer bearing (L44649), inner race and outer race (L44610), grease seal, and a cotter pin.

Dexter Single Hydraulic Jack System w/ Double Acting Pump - 12,000 lbs

Our Price: $1,327.56

(1)

Add to Cart

Smooth and powerful hydraulic jack kit includes everything you need to lift your heavy load with a press of a button. The selector valve safely controls movement while the pivoting foot pad stabilizes the jack on rough terrain.

Dexter Trailer Hub and Drum Assembly - 7K Axle - 12" - 8 on 6-1/2 - 5/8" Studs - Oil Bath

Our Price: $261.96

(58)

In Stock

Add to Cart

This hub-and-drum assembly fits 7,000-lb axles. Compatible with electric and hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, oil seal, oil cap, wheel bolts, and cone nuts included.

Dexter Bearing Kit for 1-1/16" BTR Spindle

Retail: $53.59

Our Price: $40.39

(2)

In Stock

Add to Cart

Replacement Grease Caps for Dexter/Tie Down Engineering Vortex Trailer Hubs

Our Price: $45.54

(8)

In Stock

Add to Cart

Cap assemblies replace the grease caps on your Dexter or Tie Down Vortex trailer hubs. Includes 2 threaded caps that fit 2,500-lb to 4,200-lb hubs.

Trailer Hub and Drum Assembly for Dexter ABS Tow Assist - 8K - 8 on 6-1/2 - Oil Bath - Qty 1

Our Price: $654.19

Add to Cart

Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.

EZ Lube Grease Caps with 1.99" OD - Fits 7" and 10" x 1-1/4" Dexter Hubs - Qty 2

Our Price: $20.05

(6)

In Stock

Add to Cart

Grease caps with 1.99" OD seal out dirt while letting you add grease through your EZ Lube spindle. Rubber plug keeps grease in and water out. Designed for Dexter 7" and 10" x 1-1/4" hubs. Includes 2 caps.

Dexter Self-Contained Hydraulic Jack- Square Tube - Bolt On - 12,000 lbs

Retail: $1,135.89

Our Price: $1,097.43

(7)

In Stock

Add to Cart

Powerful hydraulic jack with self-contained pump and power unit lets you lift heavy loads with a press of a button. Pivoting foot pad stabilizes the jack on rough terrain.

Dexter Grease Seal for 12" x 2" Hubs - 2.25" ID - 3.376" OD - After 1998 - Qty 2

Our Price: $26.28

(3)

In Stock

Add to Cart

Replace the grease seal on your Dexter 12" x 2" hub manufactured after 1998. Inner diameter measures 2.25". Outer diameter measures 3.376". Includes 2 seals.

Dexter Vault Hybrid Lubrication Kit for 7,000-lb Trailer Buddy Axles

Our Price: $219.67

Add to Cart

If you've ever lost a weekend to trailer trouble, you know how important bearing protection is. The Vault system has a fully sealed, pressurized chamber that keeps out water and grit, and hybrid oil self-lubricates where it's needed.

Dexter Electric Trailer Brake for Dexter ABS Tow Assist - 10" - Left/Right Hand - 3.5K

Our Price: $899.98

Add to Cart

The best trips aren't about the miles, they're about how easy the ride feels. Swap in new ABS brake assemblies and your trailer will track steadier and stop smoother, so mountain grades, crosswinds, and sudden traffic don't rattle you.

Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle

Retail: $53.99

Our Price: $44.54

(3)

Add to Cart

Dexter Boat Trailer Axle - 92" Long - Galvanized

Our Price: $624.09

Add to Cart

Lower your trailer deck for easier boat launches with this corrosion-resistant, galvanized drop axle. Ideal for marine use, it helps you launch in shallow water without sinking your truck or soaking your feet.

Dexter Trailer Idler Hub Assembly for 2,700-lb Axles - Pre-Greased - 5 on 4-1/2 - Galvanized

Our Price: $91.58

In Stock

Add to Cart

Rust-resistant kit replaces the hub on your trailer idler axle. Fits 2,700-lb axles. Inner bearing L44649, outer bearing L44649, grease seal, grease cap, cotter key, wheel bolts, and lug nuts included. Bearings and hub cavity come pre-greased.

Trailer Hub and Drum Assembly for Dexter ABS Tow Assist - 8K Axles - 8 on 6-1/2 - Oil Bath - Qty 1

Our Price: $625.63

Add to Cart

Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.

Dexter DX6.6 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 6,600 lbs

Our Price: $322.71

(1)

In Stock

Add to Cart

Use this corrosion-resistant actuator to synchronize your trailer brakes with your tow-vehicle brakes. Drop-N-Go auto-latch coupler automatically locks your coupler in place on 2" hitch balls. Designed for hydraulic drum brake applications.

Square Direct Weld Jack - Drop Leg w/ Spring Return - Sidewind - 28-3/4" Lift - 12K

Our Price: $171.06

(4)

In Stock

Add to Cart

Pull the front-facing plunger pin on this jack to release the drop leg for 13-3/4" of lift on top of the 15" of screw travel. Durable screw offers increased strength. Sidewind crank (TJD-12000-HD) sold separately.

etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories- 2" Hitches

Our Price: $27.50

(31)

In Stock

Add to Cart

If you have any gear with a 2" D-shaped hitch pin receiver this handy hitch lock will secure it to the back of your ride and eliminate noisy rattle. Can be keyed alike to match other locks.

etrailer Invisible Base Plate Kit - Removable Arms

Retail: $526.95

Our Price: $491.19

(590)

In Stock

Add to Cart

Get a clean, factory look for your car when it's not being towed by using these invisible base plates. Tabs remain on tow bar arms and easily secure to base plate receivers with a quick turn. Simple, bolt-on installation with included hardware.

etrailer Trailer Tool Box - A-Frame - Aluminum - 6 Cu Ft - 34" Long - Matte Black

Our Price: $279.65

(20)

In Stock

Add to Cart

With a locking tool box mounted to your trailer, you can keep your straps, jack, tools, and other gear organized. The gas strut holds the lid open leaving your hands free to grab what you need, and the powder coated aluminum finish resists corrosion.

etrailer Dual-Pin Two-Speed Square Tube Jack - 20,000 lb Static / 12,000 lb Lift

Our Price: $220.35

Add to Cart

This dual-pin, two-speed jack from RAM delivers 20,000 lb of static support and 12,000 lb of lift. Its spring-return drop leg, 4-3/8" tubing, and 9" x 9" footplate provide stable, heavy-duty performance.