New Arrivals

Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing and outer bearing (L44649), inner race and outer race (L44610), grease seal, and a cotter pin.

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Bearing L44649
• Race L44610
• Dexter

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Double Eye Springs
• 2500 lbs
• 1-3/4 Inch Wide
• 23-1/8 Inch Long
• Painted
• Dexter

This hub-and-drum assembly fits 7,000-lb axles. Compatible with electric and hydraulic brakes. Inner bearing (25580) and race, outer bearing (14125A) and race, oil seal, oil cap, wheel bolts, and cone nuts included.

• Trailer Hubs and Drums
• Hub with Integrated Drum
• Oil Bath
• 25580 / 14125A
• Standard Grade
• For 7000 lbs Axles
• 8 on 6-1/2 Inch
• 17-1/2 Inch Wheel
• 16-1/2 Inch Wheel
• 16 Inch Wheel
• 17 Inch Wheel
• Dexter

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Double Eye Springs
• 6000 lbs
• 1-3/4 Inch Wide
• 25-3/8 Inch Long
• Painted
• Dexter

This brake controller likes to keep things simple, with a thumbwheel on the front to adjust the output settings and a lever on the side for the sensitivity. The digital display is large and simple so you can read it with just a glance.

• Trailer Brake Controller
• Proportional Controller
• Electric
• Splice-In
• Under-Dash Box
• Under-Dash
• LED Display
• Single Trailer Only
• Dexter

Cap assemblies replace the grease caps on your Dexter or Tie Down Vortex trailer hubs. Includes 2 threaded caps that fit 2,500-lb to 4,200-lb hubs.

• Trailer Bearings Races Seals Caps
• Caps
• Standard Grease Cap
• Dexter

Lower your trailer deck for easier boat launches with this corrosion-resistant, galvanized drop axle. Ideal for marine use, it helps you launch in shallow water without sinking your truck or soaking your feet.

• Trailer Suspension Parts
• Trailer Axles
• Leaf Spring Suspension
• Marine Grade
• No Hubs
• 3500 lbs
• Spindles Only
• Universal Fit
• Drop - 4 Inch
• Dexter

Replace the grease seal on your Dexter 12" x 2" hub manufactured after 1998. Inner diameter measures 2.25". Outer diameter measures 3.376". Includes 2 seals.

• Trailer Bearings Races Seals Caps
• Seals
• Grease Seals - Single Lip
• 2.250 Inch I.D.
• 3.376 Inch O.D.
• Dexter

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,800-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Leaf Springs
• Trailer Suspension Parts
• Double Eye Springs
• 2800 lbs
• 1-3/4 Inch Wide
• 20-1/2 Inch Long
• Painted
• Dexter

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Double Eye Springs
• 7000 lbs
• 1-3/4 Inch Wide
• 24-7/8 Inch Long
• Painted
• Dexter

Lower your trailer deck for easier boat launches with this corrosion-resistant, galvanized drop axle. Ideal for marine use, it helps you launch in shallow water without sinking your truck or soaking your feet.

• Trailer Suspension Parts
• Trailer Axles
• Leaf Spring Suspension
• Marine Grade
• No Hubs
• 3500 lbs
• Spindles Only
• Universal Fit
• Drop - 4 Inch
• Dexter

Rust-resistant kit replaces the hub on your trailer idler axle. Fits 2,700-lb axles. Inner bearing L44649, outer bearing L44649, grease seal, grease cap, cotter key, wheel bolts, and lug nuts included. Bearings and hub cavity come pre-greased.

• Trailer Hubs and Drums
• Hub
• Pre-Greased
• Standard
• L44649 / L44649
• Marine Grade
• For 2700 lbs Axles
• 5 on 4-1/2 Inch
• 10 Inch Wheel
• 8 Inch Wheel
• 12 Inch Wheel
• Dexter

Replaces the "D" washers, retainer nuts, and hex nuts needed to secure the brake hubs on your Dexter trailer axle manufactered after June of 2002. Includes 2 "D" washers, 2 retainer nuts, and 2 hex nuts.

• Accessories and Parts
• Trailer Axles
• Trailer Spindles
• Trailer Suspension Parts
• Spindle Retainer Kit
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with single or double-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Upgrade your boat trailer's braking power with this rust-resistant GalvX disc brake. Kit includes 1 pre-greased hub, inner (L68149) and outer (L44649) bearings, rotor, caliper, mounting brackets, and lug nuts.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• LH
• RH
• 3500 lbs
• Brake Assembly
• Hub and Rotor Assembly
• Dexter

Replaces the shoe and roller for your passenger's-side Dexter 15,000-lb 12-1/4" x 5" air brake.

• Accessories and Parts
• Trailer Brakes
• Brake Shoes
• Dexter

Your Fortress bolt-on cap has been holding it together - now it's time to return the favor. This service kit gives your Fortress cap fresh gaskets, oil fill plugs, and hardware it needs to stay leak-free and pressure tight.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

This replacement inner member slide fits into the existing outer member housing of your Dexter or Tie Down surge brake actuator. Fits actuator models LP80, LP85, and LP8500.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• Inner Member
• Dexter

Replace worn or leaking copper washers on your Dexter disc brake caliper. These 7/16" crush washers provide a tight, reliable seal between the banjo fittings and calipers to help prevent brake fluid leaks in your hydraulic braking system.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Caliper Parts
• Hardware
• Washers
• Dexter

This brake assembly is engineered for trailers with 9,000 to 10,000 lbs. axles. Its self-adjusting to ensure optimal braking efficiency with minimal maintenance. The integrated parking brake lever adds convenience and safety.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• LH
• 10000 lbs
• 9000 lbs
• Brake Assembly
• 12-1/4 x 3-3/8 Inch Drum
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

Protect your brakes from dust and grime with this dust shield. Works for your 12-1/4" X 2-1/2" brakes for 7.2K axles. The 4-hole mounting pattern makes it easy to install. Painted finish provides a level of corosion resistance.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• Electric Drum Brakes
• Dust Shield
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with triple-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter