Built for faster runs across open terrain, this 80-watt light delivers 7,883 effective lumens and 270,070 peak candela. Programmable spot, flood, combined, and area-light modes let you add reach, then change the beam as the terrain tightens up.
These 4" combo lights blend spot reach with flood coverage for dark trails. The pair delivers 10,486 effective lumens, using a focused 9.5º spot for distance and up to 35º of spread to help keep trail edges and nearby terrain visible.
This 140-watt off-road light combines serious forward reach with programmable beam control. It delivers 10,696 effective lumens and 365,713 peak candela, with spot, flood, combined, and area-light modes for changing terrain and higher-speed driving.
This 80-watt combo light gives you selectable white and amber output as clear conditions give way to dust, fog, rain, or snow. It delivers 5,543 effective lumens and 168,797 peak candela, with programmable modes for changing trail conditions.
You're halfway up the ramps, loading solo, trying to keep the vehicle steady without risking rollback. This 12,000 lb 12V winch pulls smooth and holds position with a gearbox brake, so you can stop, adjust, and finish without losing ground.
These compact 4" spot lights are built to push useful light farther down the trail. The pair delivers 11,080 effective lumens and 562,028 peak candela through a tight 5.5º beam for long-range off-road visibility at higher speeds.
These fleet lights handle two jobs in one setup: a wide flood for close-range work and combo output for more forward visibility. The pair delivers 15,586 effective lumens, giving trucks and equipment useful light around the job and farther ahead.
Compact 2" scene lights spread a 45º beam for broad nearby coverage around camp, work areas, or the trail. The pair delivers 3,058 effective lumens for backing, loading, low-speed driving, and other after-dark tasks.
Four compact 2" scene lights spread a 45º beam for broad nearby coverage around camp, work areas, or the trail. The set delivers 6,116 effective lumens and gives you more freedom to place useful light around your rig.
You're halfway up the ramps, loading solo, trying to keep the vehicle steady without risking rollback. This 10,000 lb 12V winch pulls smooth and holds position with a gearbox brake, so you can stop, adjust, and finish without losing ground.
These compact 4" lights give you selectable spot, area, combo, and auxiliary high-beam output in one pair. Nine modes and three programmable favorites let you adapt 10,500 effective lumens to changing terrain, speed, and visibility needs.
When your tires need air away from the shop, this 12V onboard compressor keeps a 3-gallon tank on the vehicle. With 3.4 cfm and a 120 psi maximum, it puts mobile air within reach wherever your truck goes.
Heavy-duty winch with 5.5-hp, series-wound motor is perfect for recovering work trucks, trailers, and commercial vehicles. 3-Stage gear train is built to pull heavy objects, and the automatic brake ensures payloads won't slip during recoveries.
Heavy-duty winch with 6.0-hp, series-wound motor is perfect for recovering work trucks, trailers, and commercial vehicles. 3-Stage gear train is built to pull heavy objects, and the automatic brake ensures payloads won't slip during recoveries.
If your bumper is tight on space, you don't want a bulky winch eating up more room. This compact 10,000-lb winch uses dual-range gearing, so you can pull hard in low range and retrieve line faster with lighter loads.
When your tires start to sink in sand or mud, you lay down a board that helps you drive out, then carry on with extra water stored in the same piece of gear.
Heading out in a smaller SUV, pack a recovery kit sized for your vehicle and drive with more confidence, knowing you have the right ropes and shackles if sand or mud slows you down.
Topping off multiple machines, you can't build cool-down breaks into the routine. This transfer pump is rated for continuous duty and moves 25 gallons per minute. Wire it to 12V or 24V with the included alligator clips, fuel, and move on.
Fill-Rite pumps are perfect for use in the field or at the job site. Whether you're just getting set up or want to upgrade your fluid transfer operations, these pumps are built to withstand the harsh conditions of agriculture and construction.
Filling 20-80 gallon tanks at a stationary setup can drag on. This 115V AC pump delivers 20 GPM, and the nozzle boot mounts on the body for parking between fills. Fuel, shut it off, and move on.
When the fuel light flips on, you're the one who keeps the day moving. This 12V fueling setup is built for job sites and field work, with matched components that help you stay in control, keep things cleaner, and get back to the work.
Fill-Rite pumps are perfect for use in the field or at the job site. Whether you're just getting set up or want to upgrade your fluid transfer operations, these pumps are built to withstand the harsh conditions of agriculture and construction.
Filling 35-150 gallon tanks, slow flow turns every transfer into a bottleneck. This pump delivers 35 GPM and lets you select 115V or 230V AC during install. Wire it to your power source, fuel faster, and get the tank capped.
You don't want to waste time on slow fills out on the job. This 12V transfer pump wires to a battery with 18' power and 5' ground leads, and moves 20 GPM. Hook up the 12' 1" hose and automatic nozzle, fuel, and shut down.