Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers
Part Numbers: RED44FR,RED59FR
Retail:$306.52
Our Price: $273.50
You Save: $33.02
This item qualifies for Free Shipping
In Stock
Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
part number: RED44FR
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight. The Elite's unique user-controlled mode gives you direct control of your braking for any weather or terrain.
Features:
- Brake controller activates trailer brakes in proportion to your vehicle's braking
- Automatically adjusts trailer's braking based on deceleration of tow vehicle
- User-controlled mode gives you direct control of your braking
- Great for off-roading or towing in adverse weather
- Activates trailer brakes independent of tow vehicle's brakes
- Dash-mounted knob keeps your vehicle interior looking sleek while giving you easy access to the brake controller
- Lets you adjust braking power with the turn of a dial
- Gives you a manual override at your fingertips
- Offers simple diagnostics with colored LED alerts
- Main unit mounts out of sight behind the dash in any position, direction, and angle
- No more banging your knee on a bulky controller
- No interference with airbags or other vehicle accessories
- Universal wiring harness (included) or vehicle-specific adapter (sold separately) required for installation
- Meets or exceeds both UNECE R21 and FMVSS 201 regulations for sustainability and safety
- Made in Australia
Specs:
- Application: trailers with up to 3 axles (6 brake assemblies)
- Compatible with electric or electric-over-hydraulic trailer brakes
- Works with 12-volt and 24-volt vehicle electrical systems
- Main unit dimensions: 4" long x 3-3/8" wide x 1-1/8" tall
- Control knob dimensions: 1-7/8" long (including knob) x 9/16" wide x 3/4" tall
- Length without knob: 1-1/4"
- Output voltage range: 9V - 32V
- Output current rating: 25 amps continuous
- Maximum charging voltage: 12V DC
- 2-Year warranty
Tow-Pro Elite Operation
The dash-mounted knob puts control of your trailer's brakes at your fingertips. In addition to offering fast, simple power adjustment and an easily accessible manual override, it has colored LED signals that let you know what the brake controller is doing at a glance.
When you are calibrating the brake controller for the first time, the LED lights will signal your progress. To finish setting up the device, you will need to drive your vehicle in a low-traffic area and brake 20 times or so to let the unit learn its orientation and the direction of travel. If your trailer is connected, the LED light will flash green/blue as it processes the information. If there is no trailer connected, the unit will still calibrate, just without the knob lighting up. The knob will stay blue longer as the calibration process gets closer to being done. When the display turns solid blue, initial calibration is complete. The unit will remain calibrated for the next time that you tow. If recalibration is required, it will happen automatically and without LED indication.
Once the brake controller is activated, you can use the knob to set the maximum amount of power that will be applied to your trailer's brakes. Typically, this power is only readjusted when you experience changing road conditions or if you switch over from a heavy, loaded trailer to a much lighter, empty trailer, or vice versa. To get more power to your brakes, rotate the knob clockwise toward 10. To decrease the power output, rotate it counterclockwise toward 0.
When you apply the tow vehicle's brakes, the knob will change from blue to red to signal that the trailer brakes are being activated. The higher the braking power output, the deeper the red that you will see.
The Tow-Pro Elite keeps the manual override within easy reach, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just press the control knob. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
User-Controlled Mode
The Redarc Tow-Pro Elite comes with a unique feature that lets you respond to any terrain or weather you meet while on the road. The user-controlled mode gives you direct control over your trailer's braking so you can have exactly the level of power output you need for any situation - perfect for off-roading or adverse weather conditions. In this mode, the Tow-Pro Elite will apply your trailer's brakes with the same preset amount of power each time you activate the brakes in your vehicle. Set the power low if you're towing through sand or mud so that the trailer doesn't stop with too much force and act as an anchor. When on a steep descent, set the power to a higher level to ensure that the trailer's momentum doesn't cause it to push against the tow vehicle.
To turn on the user-controlled braking mode, rotate the knob counterclockwise and apply your vehicle's brakes. Push down on the remote knob twice (2 times within 1 second) and release the brakes. The knob will turn green to let you know that the mode has been activated.
Simple, Out-of-the-Way Installation
Unlike most proportional controllers on the market, the Tow-Pro Elite has almost no mounting restrictions. It comes in 2 pieces - the main unit and the control knob. Because the only part that you need to be able to access is the control knob, the main unit can be mounted out of sight and out of the way. You don't have to worry about dinging your knee on a bulky brake controller or having something in your cab that can interfere with your vehicle's lower airbags.
The dash-mounted control knob can be installed in any convenient spot that's easy for you to see and access. This can be a blank switch panel, an open spot on your center console, or wherever there's space on your dashboard. A universal mounting panel is included to ensure a clean, from-the-factory look. Custom-fit panels are available for certain vehicles as well. Before you do any drilling, be sure there's room behind the dash for the entire knob to install, including the part you don't see!
Once you've decided where you want to put the control knob, you'll need to find a good place to install the main unit. Your only restriction is the 3' plug-in cable that has to be able to reach between both the main unit and the control knob. Securely mount the box using screws, double-sided tape, or zip-ties (not included). A mounting kit (RE67FR - sold separately) is also available for the Tow-Pro Elite. Do not zip-tie the box to wiring or cables that can shift as you drive.
A vehicle-specific wiring harness is available for most newer trucks and SUVs. One end of the custom adapter plugs into your vehicle, and the other end will either plug directly into the controller or will splice into the included wiring harness - no need to hardwire to your vehicle. If a custom brake control wiring adapter is not available for your vehicle, you will need a universal wiring harness (RED69FR - sold separately). A 30-amp circuit breaker kit (331-CBK30-EB - sold separately) may also be required for installation.
For assistance in properly wiring the Tow-Pro Elite, please refer to the diagrams below:
Installation Accessories
See etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
Proportional Braking
The Redarc Tow-Pro Elite brake controller comes equipped with proportional braking to give you the best towing experience. Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer.
The Tow-Pro Elite uses an internal 3-axis accelerometer to sense how your vehicle is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow vehicle and activates the trailer's brakes to slow at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.
EBRH-ACCV3 Redarc Tow-Pro Elite Trailer Brake Controller - Dash Mounted Knob - Hidden - Proportional Brake Controller
Replaces Redarc 331-EBRH-ACCV2
Item # RED44FR
Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers
part number: RED59FR
Install your Redarc Tow-Pro electronic brake controller (sold separately) quickly and easily with this custom wiring adapter. Plug one end of the adapter into your Tow-Pro brake controller and plug the other end in beneath your vehicle's dash.
Features:
- Wiring adapter eases installation of your Redarc Tow-Pro Classic, Elite, or Liberty electric brake controller
- Custom connector end plugs into the port beneath your vehicle's dash
- Other end plugs into your Tow-Pro electric brake controller
- Some wire splicing required for Tow-Pro Classic
- Made in the USA
- 2-Year warranty
TPH-013 Redarc Wiring Harness for Tow Pro Electric Brake Controllers - Plug and Play
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional - RED44FR
Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers - RED59FR
Average Customer Rating: 4.8 out of 5 stars (1644 Customer Reviews)
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight. The Elite's unique user-controlled mode gives you direct control of your braking for any weather or terrain. Install your Redarc Tow-Pro electronic brake controller (sold separately) quickly and easily with this custom wiring adapter. Plug one end of the adapter into your Tow-Pro brake controller and plug the other end in beneath your vehicle's dash.by: Mark06/20/2022
2002 Chevrolet Silverado
I saw the great online reviews of this controller and took the plunge. I bought my 2002 Chevy Silverado K1500 extended cab short bed truck new in 2001. It came with the HD Towing package which include a factory plug in trailer brake wiring loom. I took my time over a 2 day period to carefully install and triple check my install. The Chevy and Redarc wiring wiring descriptions made it easy to join the two harnesses. I used HD crimped plug in connectors further protected with shrank tubing. All wiring was bundled with zip ties after encasing in HD harness protective cover. Zip ties held in place behind the removable panel beneath the steering wheel. The control button is installed on the right side of the steering column within easy reach. Nice install. I read that the light would not go on until a trailer was hooking up. I was elated when we picked up our new cargo trailer and the controller knob light lit up upon hitching up. the first mile of travel allowed easy testing of the system and fine tuning came a few miles further down the road. GREAT PRODUCT!
by: Happy Camper Solution for Ford Ranger owner Gary04/07/2022
2020 Ford Ranger
It truly amazes me that Ford touts the towing capacity of my Ranger, yet not one dealership I called could offer a solution for a trailer brake controller to be able to pull my little camper. I finally turned to etrailer since they had helped me meet my towing needs in the past with a different vehicle. etrailer's Redarc Tow-Pro Elite Trailer Brake Controller was a perfect solution! They also supplied a terrific video explaining in great detail how to install it in my truck. I preferred the in-dash location using one of the extra twelve volt ports using the optional round adapter insert and found it to be very convenient after a summer of towing. Highly recommend both Redarc Tow-Pro Elite and etrailer!
by: Ron04/15/2022
Love the self-calibration and hidden controller. Great space saver and works as described. I did find the knob location in your video not very good; I could not see it through the steering wheel when driving. As you can see from the picture it is now visible from the driver's seat and easy to adjust when needed. Also, in this location the only hole I had to drill was 3/16" behind the knob and not visible or damaging. I was able to use the knob bracket that came in the kit and just push it into place, very stable.
by: Hardwick01/08/2023
2000 Chevrolet Silverado
So far it is anazing! I installed it splicing with the gm wiring harness, and put the box under my console, with the knob in one of the accessory port holes using the knob adapter. The controller calibrated quickly, and works great once you get the gain set correctly. The ONLY thing I don't care for is that the unit stays powered up, so the led stay lit while a trailer is hooked up. I guess it doesn't drain battery much, but I don't care for anything draining my battery, no matter how small.
by: James08/28/2022
Easy to install and works great. Love the stealth mounting. I get compliments on just the one knob being visible.
by: David02/04/2024
I installed this on my 2009 Dodge RAM 1500. It replaced the other one I had. This was a challenge to install because of where I had to mount it under the dash. But it was also wired a little different. The former controller had the positive (red) and negative (black) wires reversed from this Redarc controller. When I installed the Redarc the way the other controller was wired the brake lights wouldn't work. Once I got them put right for the Redarc it is working right.
by: Jose 05/07/2024
Chevrolet Silverado
Great quality trailer brake controller, seats very nice, flush in the not use ash tray of my silverado. Lot of configuration options, ensure to read the instructions and watch the installation video, be advised it has no power until you plug a trailer, this had me going for a while :-). Thanks etrailer.
by: John03/10/2024
I have not used it yet. But i did want to know if i could use it on a small open motorcycle trailer. If i have it on for the lights, will it still effect the braking if i turn the dial to "0" on the dash? Thank you! But I can tell you, very easy to install.
by: Rodney Robinson Jr04/22/2023
Super easy install, save even more time with the plug and play harness. Lean install- only thing you see is the adjustment know- no bulky box in the way.
by: Dan 05/09/2024
Honda Ridgeline
Easy plug n play on my Ridgeline. Works great with both of my trailers. I have the remote knob mounted in a factory block off plate looks stock works as well as any integrated controller.
by: John 04/17/2024
2019 Ford Ranger
Works very well and easy to install. I put it in my 2019 Ford Ranger and it works very well. I rarely tow so didn't need the model with more involved installation. I just shut off vehicle auto braking and cruise following which I don't ever use anyway.
Factory wiring harness is right up under the dash and this plugged right in easily.
by: Vincent04/19/2024
Nissan Pathfinder
The install was straight forward. Being my second time I was able to install the controller easily and without much complication. I have both a Nissa Pathfinder and Armada, which made the installation easier since both models are similar. The product responds well, still trying to dial in the perfect breaking level.
by: Barry11/10/2022
Superb controller and outstanding service from both etrailer and Redarc. I had some questions concerning the controller interfering with the advanced braking/collision avoidance in my Tacoma, as I had read about. I emailed Redarc in Australia and they promptly answered and even scheduled a phone call! I had a good conversation with them and it turns that that issue does not apply to my vehicle. So I give Redarc 5 stars at least for service. The controller itself is easy to install after watching the video. I would definitely buy the vehicle specific wiring to avoiding splicing. The bracket also made it very easy. I just used it on a long drive pulling a travel trailer. Works great. Some trial and error is all that’s needed to adjust the amount of braking.
I installed it in the center console so it would be easy to reach in case of sway. It also looks like it came from the Toyota factory this way. No ugly box hanging below to hit your knee.
Overall absolutely great device.
I highly recommend both the Redarc Elite and etrailer.
by: Denise03/29/2021
The Redark trailer brake controller installed easily. In my 2020 Toyota 4Runner. It looks like it came installed from the factory. It’s small and easy to reach when driving. It came with a plastic install panel. This is designed for installing in a hole that you drill in your dash. It will not fit in a knock out space in your dash. There is one that fits the dash perfectly that you can buy from etrailer.
etrailer automatically bundled the Redark trailer brake controller with the correct plug and play wiring harness for my vehicle. It was nice not to have to search for the wire harness. Everything installed perfectly.
I haven’t tested the function of the brake controller yet. I’ll hook up to a trailer this week.
The items arrived in less than a week and the package was in good condition. The order tracking worked great. The tech videos on the etrailer website were really helpful. I’ll purchase from hem again.
by: Nina M02/13/2023
2009 Ford Ranger
Received this order sooner than expected and in rural area! All the parts are in the box which will be installed in a 2020 Ford Ranger for braking a 2009 Casita which is especially important in a hilly area. Have not gotten it installed yet but I plan too! Thank you etrailer.com!
by: Gene G03/20/2024
Easy installation and good instructions. I am extremely pleased with this product. It works very well and have had no issues. I am pulling a hard side camper and close to max weight for my truck and this brake controller is spot on. I like the ease of changing the setting on steep hills as needed. A little hard to pick up on the color change in the daylight when braking but a minor shift of vision corrects this issue. I definitely would recommend this controller to anyone else . The salesman was most helpful in getting me set up. If a grade of 10 is the best then I give the company, salesman and this product a 10. Thank you Gene
by: Eric05/11/2024
1994 Chevrolet C/K Series Pickup
This is the third Redarc elite I've installed, the oldest being 4 years ago. They're all flawless, easy to use, more available and less intrusive than anything else. I can pull my single-axle motorcycle trailer empty and not be overpowered, or my 2 axle dump trailer without being underpowered. Spectacular in all regards.
by: ToughMudder02/07/2023
2008 GMC Sierra
Install was a breeze, nice and clean,love the ease of the controller and the many settings if you want them if not set it and forget it perfect for the truck that is not run everyday uses power only when attached to trailer no extra draw on battery. Would definitely buy again great product!
by: Lance05/19/2021
2017 Nissan Titan
I’m going to be up front and say I have not tested this beside driving around town. The install was very quick, maybe 20 minutes in all initially in my 2017 Nissan Titan SV. I do have some concerns though. After install I had no lights to show calibration was going on. From reading the user manual I guess that can happen. First time hooking up the trailer everything seemed fine and the light was blue as it should. Once I turned my running lights on though it began to blink red showing a fault with the cable. I tested everything to make sure it was getting voltage and the wires were correct. After about an hour I found something between my backup camera on the travel trailer and the brake was causing some sort of issue. I removed the camera, unplugged all the cables from the tow pro elite and hooked it back up. Once plugged back in it showed green and blue lights showing it was calibrating. I drove the trailer around town and our relief route. After about half an hour the light turned solid blue. The control is easy to use and looks very nice. I’m unable to get it to switch to user control mode but the proportional and manual brakes works fine. I will update my review after we take it out on a few trips. As of now it seems like a great product, very clean looking and should do a great job.
by: 22 Ascent11/06/2022
I liked having the ability to place the controller in an easy to view and use location. The unit works as well as any other controller by other companies that I have used but we’re always hard to see to adjust and bang your knees while getting in or driving. Works well in my Subaru Ascent and when the time comes the old ones in the trucks will be replaced with one of these.
by: Sharon02/12/2024
Although this product cost me $250 plus another $750 to install which including having to buy an additional part (because not everything that you need comes with it), I'm extremely pleased with it. Proportional braking is the only way to go. In addition, do not buy wireless brake controllers. Why? Something happens with your phone and then what? You have no brakes! In addition, you don't have to play around with the dial. Redarc Tow-Pro automatically calibrates the brake pressure. Both my suv and trailer stop in unison, so much so I don't even feel the trailer as a separate unit. Redarc remembers, so you are not recalibrating every time you hitch up your camper. Highly Recommend.
by: Darrell 03/28/2024
Best brake controller, I have installed. Requires a little extra time to get it installed. But worth it for the convenience for handy use location. Works great and looks great.
by: KarlS07/06/2022
The Redarc Tow-Pro brake controller has worked flawlessly since I installed it a year ago. I tow a fairly light (2000 pound) pop-up trailer, which can be an adjustment challenge when braking on loose surfaces. I've found it very easy to slightly reduce the setting while on gravel and then return to the correct setting when returning to normal roads.
I purchased the Redarc because I could never get my previous controller to brake smoothly - it would often jerk at low speeds. I think that controller had problems because it was inserted into the 7-pin connector that was held by a metal bracket under my bumper that I suspect vibrated when braking, which confused that controller. Once I switched to the Redarc, which is firmly mounted under the dash, I had no more problems like that.
Finding a location in my Honda Pilot to mount the control module was a challenge - but well worth the effort. I mounted it to a plastic panel that I installed over an unused cavity in the console underneath the radio (see picture). The knob is easy to reach, and is out of the way of my knees.
Mounting the main control box under the dash was made easier because I didn't have to worry about its precise orientation since it will calibrate itself wherever it sits.
by: Mike W.10/01/2022
Installed the Redarc Tow-Pro elite in a 2022 E350 Thor motorhome. Install was straight forward. Mounted behind the brake pedal with an extended aluminum plate. etrailer was incorrect when I was told Redarc does not make a cable for this model. The available correct cable / plug for this model is the TPH-007 which is the same Ford plug that is on 3036-P. I did splice in the cable that came with the kit in order to reach the desired location.
The controller fit well to the right of the steering wheel. Had to drill thru one of the panel clips which really wasn’t needed.
by: Tim @ Man_Dog_Overland09/23/2022
2017 Jeep Wrangler
This Redarc Break Controller is a must for off-roading with a Off Grid Trailer. The ability to control the trailer separately and allowing you to hold your tow vehicle while descending hills is worth the investment.
25
1631
Show More Reviews Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?
- Where is Brake Controller Install Port on 2022 Ford Explorer for Redarc Tow Pro Elite
- To install the Redarc Tow Pro Elite Brake Controller part # RED44FR that you referenced the correct harness is the part # RED87FR for your 2022 Ford Explorer Timberline and you'll find the correct plug on your vehicle under the dash by the steering column.
view full answer... - Recommended Brake Controller For A 2019 Mercedes-Benz GLS 450
- The Redarc Tow-Pro Elite Brake Controller # RED44FR will work for your 2019 Mercedes GLS450. I like this controller because the main unit will be installed out of sight with only the control knob showing, which will give your Mercedes-Benz a nice factory look. To install the Redarc controller you will need to remove the factory brake control port and hardwire the controller. There is not a plug and play pigtail available at this time.
view full answer... - Troubleshooting Brake Override and Stop/Start Malfunction On 2022 Toyota Highlander Redarc Tow Pro
- It sounds like when the Redarc Tow-Pro Elite Brake Controller # RED44FR was installed on your 2022 Toyota Highlander that they may have damaged the brake signal wire or tied into the wrong wire. I recommend taking it either back to the shop who installed the brake controller or your local Toyota dealer to have the wire checked and fixed or moved to the correct connector.
If you are concerned with the wiring and 7-way they installed the Tekonsha OEM Replacement Vehicle Wiring Harness
view full answer... - Comparing Trailer Brake Controllers For 2021 Toyota Sequoia W/ Factory Tow Package
- I would be happy to go over the options for installing a trailer brake controller in your 2021 Toyota Sequoia Platinum with the factory tow package.
Since you have the factory tow package you can easily install a trailer brake controller like the Redarc Tow-Pro Elite # RED44FR you were looking at by using a plug-in wiring adapter. For this specific controller you would need the # 3040-P which plugs in to the factory trailer brake controller port underneath the dash of your vehicle along
view full answer... - Harness and Panel Needed To Install Redarc Tow-Pro Brake Controller On 2016 Toyota Tacoma
- In order to install the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR on a 2016 Toyota Tacoma you'll need the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers part # RED99FR and the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob part # 331-TPSI-002.
The 331-TPSI-007 is for the older model.
view full answer... - What is the Difference Between the Redarc Tow Pro Elite V2 and v3
- The # RED44FR is the 331-EBRH-ACCV3, which is the 3rd version of the Redarc Tow Pro Elite controller that was originally only available in Australia; the # 331-EBRH-ACCV2 is the 2nd version and has been phased out. They're really mostly the same controller and there aren't any functional changes made between the two aside from the smaller knob on the V3 # RED44FR.
I've linked a video review of this controller for you to check out, but even though one is newer the updates were mostly cosmetic.
view full answer... - Parts Needed To Install Redarc Tow-Pro Elite RED44FR In 2021 Toyota Highlander
- You can absolutely install the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR in your 2021 Toyota Highlander with the factory tow package, but there is not an adapter to plug the controller into your vehicle.
You will need to use the included wiring pigtail to make all of the required connections which are as follows:
White wire to ground
Blue wire to trailer brake wire on 7-way connector
Red wire to cold side of stop light switch (wire that only has power when brakes
view full answer... - Installing a Redarc RED44FR in a 2021 Subaru Ascent
- The 2021 Subaru Ascent that came from the factory with their tow package actually has a port under the dash where you can plug the Redarc Tow-Pro Elite # RED44FR directly into with an adapter. The Tekonsha Pigtail # 3062-P would plug directly into said port. You will also need the Redarc to Tekonsha adapter # 331-TPH-017 to complete the install. Unfortunately we haven't done any installs on the Ascent, so we do not have any videos as of yet.
view full answer... - Dash Panel Insert for Knob and Install Harness for Redarc Tow Pro Elite for 2022 Toyota 4Runner
- For the Redarc Tow Pro Elite part # RED44FR we have the dash panel insert part # 331-TPSI-002 which is custom fit for your 2022 Toyota 4Runner. Then the custom harness you need to cover the wiring of the controller for your vehicle is the part # RED49FR.
view full answer... - Comparing Factory and Aftermarket Trailer Brake Controllers for a 2016 Chevy Silverado 1500
- The brake controller I recommend for a 2016 Chevrolet Silverado 1500 is the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR which when paired with the Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers part # 331-TPH-010 will be plug-n-play.
The reason I recommend this route over a factory brake controller is because the factory brake controllers are very finicky and error prone. We are constantly troubleshooting issues with them which usually result
view full answer... - Installing Redarc Tow-Pro Brake Controller on 2018 Jeep JL Wrangler Unlimited with Tow Package
- If your 2018 Jeep JL Wrangler Unlimited is equipped with the factory tow package, which should include a 7-Way connector at the rear bumper (you can check to be sure), the only additional components you will need outside of the Redarc Tow-Pro Elite Brake Controller # RED44FR itself is the Tekonsha Plug-In Wiring Adapter # 3073-P and Tow Pro Adapter # 331-TPH-017.
The Tekonsha Plug-In Adapter will simply get plugged into the factory port beneath the dash of your Wrangler at one end and
view full answer... - Location to Mount Red Arc Tow Pro Elite Brake Controller on 2020 Chevrolet Silverado 1500
- The Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR can be mounted just about anywhere that the wires can reach, and there is enough room behind the button. The button or knob requires at least 1 3/4" of depth and 3/4" width of space to mount up.
I've installed this brake controller in several different kinds of vehicles and for your 2020 Chevrolet Silverado 1500 the Red Arc is an excellent choice. I like the remote design, it makes it to where you don't have to put a big box
view full answer... - Recommended Trailer Brake Controller For a 2017 Winnebago Travato on ProMaster 3500 Chassis
- I find the Redarc Tow-Pro Elite Brake Controller # RED44FR to be the best brake controller for your 2017 Ram ProMaster 3500. This controller has a small dash mounted control knob so you do not have the interference of a large dash mounted controller to hit your leg on. It also allows you to switch from a proportional mode to a user controlled mode which is similar to a timed brake controller. This is typically more beneficial if you are using the trailer off-road.
To install this you
view full answer... - Trailer Brake Controller Options for a 2023 Toytoa 4Runner
- I checked with Tekonsha and they currently do not have any wiring harnesses for the 2023 Toyota 4Runner, and the wiring harness you mentioned is not going to fit your vehicle either.
If you're looking for a brake controller, the only option is to use either the Redarc Tow-Pro Elite Brake Controller # RED44FR or the Redarc Tow-Pro Liberty Brake Controller # RED24FR with the Plug-and-Play Wiring Harness # RED49FR.
You could realistically use any brake controller with the included universal
view full answer... - Recommended Trailer Brake Controller For a 2022 Jeep Wrangler 4xe With Factory Tow Package
- Yes, you can use the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR with the Plug-and-Play Wiring Harness # RED93RR on your 2022 Jeep Wrangler Rubicon 4xe with the factory tow package. This controller includes a Universal Mount # 331-TPSI-001 that will give you a factory appearance and it does not take up a lot of room like other controllers that mount on the lower dash.
The Tow-Pro Elite allows you to switch to a user controlled mode that will allow you better control if you
view full answer... - Trailer Brake Controller Recommendation For A 2020 Toyota 4Runner
- While we do not carry a factory brake controller for your 2020 Toyota 4Runner, we do still carry a bunch of other great options that'll work great with your 4Runner!
Take a look at the:
-Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR, with the plug-and-play wiring harness # RED49FR.
This brake controller is great because it will allow you to tow trailers up to 3 axles, will work with 12V or 24V vehicle systems, and when installed, only leaves a control knob visible keeping
view full answer... - Redarc Tow Pro Install in 2016 Jeep JK Mopar with OEM 7-Pin Connector
- From the 7-way perspective yes all you need is the blue wire for the trailer brakes. But there are other connections that need to be made to install the Redarc Tow Pro part # RED44FR.
For a wiring kit to install the brake controller to the 7-way you would want the Wiring Kit for 2 and 4 Brake Electric Brake Controllers # 5506. This will provide the power source and ground for the wiring for the brake controller. You will need to test the wires from the brake pedal switch of your vehicle
view full answer... - Recommended Brake Controller and Wiring for a 2022 Toyota Sienna
- We have exactly what you need to add a brake controller and wiring to your 2022 Toyota Sienna.
For a brake controller I recommend the Redarc Tow-Pro Elite # RED44FR because it not only is a great controller, but it also installs out of the way and has a small knob that you use to adjust settings. Since space is typically limited in and around the dash of minivans nowadays the mounting convenience is invaluable.
For wiring you need to start off with a 4-Way # TK69FR for the standard
view full answer... - Can Redarc Trailer Brake Controller Replace Factory Brake Controller On 2016 Chevy Silverado 2500
- Yes, the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR or the Redarc Tow-Pro Liberty Brake Controller part # RED24FR can both be used to replace the factory brake controller on a 2016 Chevrolet Silverado 2500 using the Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers part # 331-TPH-010. That said, you'd need to cut the blue brake output wire from the harness where it would normally plug into the vehicle side brake controller plug and run this to the
view full answer... - Parts Needed To Install A 7 Way On A 2015 Honda Pilot
- We definitely have what you need to get a 7 Way installed on the 2015 Honda Pilot you are working on. However, the correct pieces will depend on if the Pilot has the factory towing package or not so I did include both options, just in case. I included some install and review videos for you to check out on each product as well.
If it does have the towing package that originally included a 7 Way plug, the Tekonsha T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
view full answer... - Parts Needed To Install The Redarc Tow-Pro Liberty And A 2022 Honda Ridgeline
- If you have the factory tow package on your 2022 Honda Ridgeline, then you will just need the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED59FR for the Redarc Tow-Pro Liberty Brake Controller # RED24FR.
In order to install the Redarc Tow-Pro Liberty Brake Controller, on your 2022 Honda Ridgeline, you will just need to plug one end into the main unit, and one end goes into the under-dash junction box. Then you will need to pick out a location where you
view full answer... - Does Install Harness for Redarc Tow Pro Elite for 2021 Honda Pilot also Fit 2023
- Yes, the same Redarc brake controller install harness part # RED59FR fits the Redarc Tow Pro Elite part # RED44FR to a 2021 and a 2023 Honda Pilot. So basically your complete setup will transfer to the new Pilot and you won't need anything else.
view full answer... - What is Length of Redarc Brake Controller Install Harness # RED59FR
- The length of the Redarc brake controller install harness part # RED59FR that you referenced is 32 inches.
view full answer...
Info for these parts were:
Edited by:
Lindsey S
Expert Research:
Jameson C
Installed by:
Kathleen M
Video Edited:
Dustin K
Updated by:
Wilson B
Written by:
Kristina F
Test Fit:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.