Part Numbers: K2AVAL8826ELT,65070
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab.
Features:
Specs:
The Detail K2 Elite snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled wireless actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Elite snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
The Elite snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
The electric actuator on this plow allows you to lift and lower the blade using either a toggle switch that installs in your cab or the included wireless remote control.
To raise the plow, use the switch or remote to activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. This simple, chain-lifting design has fewer moving parts than other plow-lifting devices, so the setup is less complicated and there are fewer parts to have to repair or replace.
This actuator lifts and lowers the snowplow blade smoother than an electric winch. In addition, fewer amps are required to run an actuator than to operate an electric winch, which means that the solenoid on the Detail K2 Elite will last twice as long as the solenoid on a plow that uses a winch. There is also a built-in clutch that prevents damage to the actuator if you try to raise the blade too high or drop it too low. The electric actuator is built to withstand extreme temperatures and wet conditions with its completely sealed gearbox and housing.
The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.
Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.
Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (100 Customer Reviews)
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.Love the plow.
Only downside is the outside bottom corners have bent backwards while plowing. I will have to straighten and reinforce those areas. I plow six different driveways. I was using a 4whlr plow for these before and it would take me several hours to all day, with this plow its less than 4hrs including driving time and I have vehicle heat. I've had many people looking, commenting and asking about this hitch system. I recommend it and give them the etrailer site for information and purchasing advice. This system is very impressive. Thank you.
I installed this myself with no help and I'm rapidly approaching 70. All the parts were included. Yes, it took me a bit longer, and, yes, it wasn't fun laying on the ground or getting up and down from such positions.
The hitch works as it should. Some of the bolts were a bit inaccessible for my torque wrench with the various extensions I own but I'm sure they're very tight. It works great with my snow plow. Sorry, but I have not taken any photos.
Easy to install (On my Tacoma) and is sturdy. Just a thought to anyone who installs this, spray it with something like spray rubber or paint to help with corrosion. The bolts and nuts themselves started to show rust almost after the first use. And if you live in the RUST BELT like me, its gonna get hit with alot of salt, so best protect that investment!
The hardware is cheese. Stamped with grade 5, I would rather see grade 8 bolts, one snapped on me. My only problem is the hardware is cheesy, cheap . Grade 8 would be nice. I would rather see rust than know my bolts can snap at any time.
Overall everything went well. The box arrived with a few holes in it, but the hitch and all bolts were there and just a couple of minor scratches. Installation was pretty much straight forward, a little more difficult on the ground as opposed to doing it from a lift but that is generally accepted by do it yourselfers. Tool list is more extensive if you torque the bolts properly, for instance you will need a crows foot that fits your torque wrench as you can’t get a socket on a couple of the bolts. I’m a tool crazy person so that is no problem for me! I preferred the Draw-tire brand as I could put the rock and gravel Shield back on my 2010 Toyota Tacoma. Looks good fits great and etrailer.com did a great job of delivering the product at a good price. Thanks etailer.com!
Product was as advertised, Excellent. It was delivered without all the proper hardware. I was missing 4 lock washers and 10 nuts, luckily I have a good store close. I have a 2017 Toyota Tacoma. Install of the drivers side bracket was easy. Passenger side bracket rear bolt was tricky due to brake lines but a little bend did the trick. Hole alignment was spot on.......don't tighten anything until fully mounted.....and then do it in the order in which the directions state. It did take me longer then anticipated but it was well worth the wait, I couldn't be happier!!!!!!!! Now to make adjustments to the surf fishing rack.
Excellent hitch. Looks great on my truck. Easy to install. Fits perfect. Great price.
Needed to be able to have more maneuverability in getting my boat into my backyard. This front hitch does the trick.
Just arrived today and couldn’t wait to install it on my 2007 Tacoma. Within the hour of the UPS man handing me the box I was grabbing tools and loosening the nuts on the skid plate shroud (4 12mm bolts) and the “strap box” thing held on by a 17mm bolt and I’m ready to install. The two mounting plates went on easily, next the middle hitch and the lower bolts that secure to where the “strap box” once was and That was it!! Any knuckle dragger could install this hitch with ease. I bought this hitch so I could haul my motorcycle in front while pulling my trailer. Love it!!
The hitch is nice and looks good. For you "Real Off roaders" look at one of the $500 versions that put it above the bumper. It dose affect your approach angle. but I wanted it to mount a cooler on the front when towing our camper. Going to work out fine. Like many others have said it was missing hardware. 10 bolts and 4 lock washers to be exact. The bag was intact with no rips. Guess it's my own fault but I didn't realize it till I was most of the way done with installation. Called and they got new parts on the way but said that it would be 5 to 7 days. One trip to Lowe's and got it installed 30 minutes later. $3.50 to get it installed that day was worth it. Fast delivery to. And they were on it to make sure all was good. Thank you just hire some one who can count to put hardware together. Lol
What a great product. As with anything that I order I always look at the welds and Howard has put together to make sure there is nothing obviously wrong. This product was built incredibly well! I did get all the bolts out ahead of time and all the hardware was there. Putting this product on was very easy I timed it and it only took 45 minutes with hand tools.I like the fact that on the draw tite you can continue to use your front skid plate. Now that I have Brad enough about the product and installation let’s talk about the customer service. The customer service was as good or better than the product. I talked to Kyle and within 10 minutes I had my product on order. He also told me that they guaranteed the best price. I did find one while I was at work yesterday for $20 cheaper but for the quality of the customer service I would feel embarrassed calling for $20 back for how they treated me. Definitely get one of these if you have a Tacoma. And did I mention that it arrived at the house less than 48 hours after I ordered it!
This plow does not stand up to much use. I used it for my long gravel driveway and I was dissapointed in the durability of the plow. The plow bent near the cutting edge and twisted when I accidentally bumped into a rock when turning around. This plow is for light use only and it does not back drag snow well since it is light and does not have any down pressure.
I was nervous about buying this or any other product like it without a pro mechanic to help. I read the reviews and decided to go for it. It was easier to install than I could have imagined and did it myself. You'll need a socket set and wrench set. The product lined up perfectly with my 2010 tacoma. Absolutely no issue!
The hitch fits perfectly for my 2018 Tacoma. Had to trim some stuff as stated in directions.
The problem I had was I didn’t check hardware and make sure it was all there before taking apart my truck.
So I ended up buying nuts and lock washers at the local Home Depot.
Worked like a charm and from there out everything went smoothly
It did take longer then 35 minuets but I was installing it on the ground so it took about 2 hrs with a friend.
Would recommend this to anyone looking to put a hitch on.
This was fairly simple to install, once I figured out what in the world I was doing. The instructions are great, if you already know the names of the parts they're referring to. I'm not mechanically inclined and it took me approx 2 hrs to install. Thankfully I still have a 75ftlb torque wrench.
My only beef is that for a 2016 Tacoma (TRD Sport), the lower air dam needs remove for installation, and it doesn't get reinstalled.
Other than that, installation's a breeze, and this sucker is heavy duty. If I ever need any parts like this, or anything related to automotive or trailer stuff, I'm coming to this website FIRST.
This is a wonderful product and has made trailer positioning a snap. I can now maneuver my boat / utility trailer up a very narrow drive without going into the yard. The only downside was the unit did not come with all the hardware to install. etrailer sent me the missing hardware very quickly. Be prepared to make cuts to the air dam if so equipped. A torque wrench is required to install along with socket and open end wrenches.
Product fit and finish were remarkably good. Mounting was a breeze with zero issues. Worked well in conjunction with my matching rear receiver. Easily transported my 16ft kayak from coast to coast. Would highly recommend this product to anymore looking for a front mount receiver.
Bob F.
2/2/2022
Great. The finish is as fresh looking as the day it was installed and Ive driven the truck clear across the country and back.
Easy to put together,easy to put it on and take it off my truck, works like it should
Its a very well built hitch. Easy to install it took me 45 minutes and I’m no professional. Only reason I’m not going to give it to 5 stars is the included hardware was not all there. Not a big deal a quick trip to the hardware store and a couple extra bucks.
Installation on 2005 Tacoma when well with no issues. Box was missing a few parts (nuts & washers) due to a damaged box but etrailer took care of that.
This receiver mount arrived as expected, and I had it installed by a pair of experienced mechanics, took about half an hour. Everything fit as needed and will be available to move my trailers for the life of my truck. No exposed welds were found and the paint coating is very thick. I am very satisfied and would recommend the product and etrailer.
As always great price, great service ,and great products .excellent customer service and tracking
Installed myself in about an hour or so….not too difficult.
Make sure you get the dried up mud out of your wheel Wells before you start the install!
Lance S.
11/12/2022
Excellent!
I installed this hitch on my Tacoma as a recovery item when driving very narrow mountain roads. That is, as an attachment point for me to be towed out, or as an attachment to pull others backwards out of a jam. As luck would have it, I have yet to use it for this purpose. It bolted on straight out of the box, and is solid & secure. I get a lot of comments on its purpose and got a lot of people thinking how useful it could be. I consider it to be a very good purchase. (Hopefully not needing it any time soon!)
John
1/11/2019
Year later still getting good comments on the install. Amazing thingit is isnt rusting or otherwise needing attention. Remains a good buy.
etrailer was great - fast delivery and excellent service. Now for the product. Installation instructions are poor and the tool list is incorrect. Nevertheless, the installation is straight forward and you really do not need the instructions. The manufacturer shorted me several bolts, nuts, and washers. Had to make a trip to the hardware store to install. Fortunately, bolt size was common. Not what I expected from Draw-Tite.
Joe
10/14/2019
No problems
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
9/25/2023
I will have our Customer Service team reach out to you.