Roof Rack Includes:
Part Numbers: TH711420,TH49SC,TH53ZE
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.
Features:
Specs:
TheThule WingBar Evo crossbars let you quickly and easily build a quiet, aerodynamic custom roof rack for your vehicle. These high-end bars look great on any vehicle, and they are perfect for those who want a quiet roof rack that can carry plenty of gear. The bars have dual rubber strips in the T-slots and pivoting endcaps that allow you to easily mount carriers and accessories. Each bar extends past the feet to maximize carrying capacity. The bars are constructed of aluminum with internal BoxBeam structures that make them extremely durable yet lightweight. The WingBars require a Thule foot pack to mount the rack to your roof. Some vehicles - such as those with a naked roof - may also require a vehicle-specific fit kit .
Aerodynamic TrailEdge Design with WindDiffuser Strips
The WingBar's tapered TrailEdge shape helps reduce wind drag by separating the airflow over and under the bars so you won't see a reduction in your vehicle's gas mileage. This also dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack.
The rubber WindDiffuser strips in the T-slots have V-shaped ridges that direct air over the tops of the bars. This reduction in wind drag also helps maintain fuel efficiency and significantly reduces wind noise.
Channel-Mounted and Clamp-On Accessories
WingBar Evo crossbars have built-in T-slots with rubber strips that simply press into place. This makes them easier to install when compared with strips that have to be threaded into the channel from the end of the bar. The dual-strip design also makes accessories easier to install in the T-slots when compared with strips that have to be trimmed. Simply lift the SwingBlade endcaps open, slide your gear into the channel, and close the endcaps. These rubber strips also seal the gaps left by your accessories so that water and dirt don't get into the T-slots.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Strong, Durable Construction
The WingBar Evo crossbars are made of anodized aluminum with internal BoxBeam structures. These structures strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Installation of the WingBar Evo crossbars is quick and easy, and you don't have to do any drilling or vehicle modification. The bars have bottom channels that accommodate your Thule feet. SmartSlide sliding scales in the bottom channels let you place the feet in the proper location using the vehicle-specific measurements provided in your fit kit manual. Simply slide each scale to the measurement indicated in the fit kit manual, then slide the foot into the channel until it rests against the scale.
For applications that don't require specific measurements provided in a fit kit manual - such as a raised rail - you can center the rack after you place it on your vehicle using a tape measure. Then slide the scales against the feet to fill in the gaps in the channel.
Insert the included rubber filler strips into each channel between the outer edges of the feet and the ends of the bars, and trim the excess. These rubber strips, coupled with the sliding scales, help to keep dirt and water out of the bottom channels and help to reduce whistling.
To complete installation on your roof simply tighten a single screw inside each foot using the torque tool included with the foot pack. This single attachment point enables you to secure the crossbar to the foot and the foot to your roof simultaneously.
These heavy-duty feet let you install Thule Evo crossbars on your vehicle with fixed mounting points or tracks. Click-in brackets let you quickly assemble and install feet - no additional tools required.
Features:
Specs:
These custom clips and pads let you mount Thule Evo Fixpoint or Edge Fixpoint feet on your vehicle's factory integrated attachment points. The fit kit includes pads, hardware, and tools necessary for installation.
Features:
Specs:
Average Customer Rating: 4.8 out of 5 stars (1331 Customer Reviews)
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales. These heavy-duty feet let you install Thule Evo crossbars on your vehicle with fixed mounting points or tracks. Click-in brackets let you quickly assemble and install feet - no additional tools required. These custom clips and pads let you mount Thule Evo Fixpoint or Edge Fixpoint feet on your vehicle's factory integrated attachment points. The fit kit includes pads, hardware, and tools necessary for installation.I'm using these Thule Evo Fixpoint Feet #710701 in conjunction with the FitKit #87003 to mount my DropRack XL to the rooftop of my 2021 Jeep Grand Cherokee. Eventually I'll get a Thule Rooftop Cargo Box to transport our RV camping supplies for which we don't have enough room in the Jeep or our Aliner RV camper. For now, I'm also using the setup to transport 4' x 8' plywood sheets for a DIY home project. This is the perfect solution for a multi-use application that'll enable us to accomplish more projects around the house as well as on the road.
I’ve been searching for a set of crossbars for my 2021 Crosstrek. After looking at several different companys,, I decided to go with etrailer.com and get the Thule Wingbar Evo Crossbars and Evo Raised feet. Ordering was quick and shipping was even faster! Installed them in about an hour with no issues. I love the way they look, and the construction is solid. Shout out to the staff for doing a great job and for the great communication from placing the order, confirmation, updates and shipping the order. You will not be disappointed!
So far its the best roof rack you can get today! Had no issues when driving through rugged and bumpy terrains all day.
53” Thule bars fit our 2021 RAV4 Hybrid! Most people appear to be using 47” bars for the 2021 RAV4 with flush roof rails, but that’s smaller than I wanted. I sometimes carry a sheet of plywood, or a kayak plus a cargo box, and wanted a wider rack for that. I had heard that upsizing to the 53” bar was potentially not possible because the mounting slots on the bottom of the bar may not accommodate the rail locations relative to the bar length. ETrailer helped me out with some dimensions, so I bought the 53” bar knowing it would be close. There is only about a quarter inch of play on either side on the rear bar, but it fit (the front bar had more play, since the towers are a bit further apart at the front).
I’m SO happy with the result! Now I can carry what I want on the rack, and have room to spare! It looks pretty good too!
I've always trusted Thule bars. I have an old Xsporter on my truck that works really well and it has held up over time. I needed to get a Thule rack for my Jeep Grand Cherokee and found that etrailer had all the parts I needed specified for my model. That was one of my favorite things about the site. No need to search around for the different parts to attached onto the factory rails. Once I received the rack and components, it was really easy to install. I pretty much watched the etrailer videos before hand.
I have the older Hullavator 897XT to haul my kayak in. With the WingBar Evo, I found I needed to get a slightly longer bolt (6-1.00 x 30), which I got from the local Ace hardware store, to attached the Hullavator support bracket to the WingBar. Once I got those bolts set up, I was on the water with the kayak the next day.
Talked to the customer service a few times and they are great friendly people. And I can understand what they are saying.
Overall solid product. The little rubber strips that fit into the top bar are relatively fragile, I installed them, pulled one out to trim about 1/8 inches of excess length and the strip deformed such that it never went back in correctly. Fortunately etrailer had replacement strips.
The bars are strong and fairly quiet, especially considering that I mount them on the main cab of my pickup truck and not on top of the canopy. My biggest concern is that the rubber strip that runs the length of the bar to reduce wind noise was badly damaged when I slid my canoe up on to the bars. Given the weight of the canoe, I'm accustomed to getting one end on a bar and sliding it back into position. Given the sensitivity of the rubber, is started pulling away from the bar and shredding when sliding the gunwales over the top of the bar. I'll try to be more careful, but a roof rack needs to be more utilitarian in my humble opinion.
Install was pretty straight forward. I did have to drill holes on the roof gutters for the fixed point bolts (2024 Mazda 3 5dr). Shipping was delayed by a month but it was not due to etrailers fault.
Items arrived later than expected despite cancelling an month long order due to waiting stock on a different set up that was in stock. Once it arrived the box was all torn up and the person that delivered it just dropped it in the garage with the boxes spilling out of the bigger box. Love Thule products, etailer and the shipping supplier not so much,
The package was shipped in its OEM box with no additional protection. As such the Thule Aero wing cross bars were both dented on one side. Not sure if I received a return or if the product was dented in shipping as there was a significant amount of packing tape on the dented side. Either way, the end caps wouldn’t fit into the dented cross bars until I cut away plastic from the end caps. For $XXX+ dollars you think that would buy more shipping protection. Unbelievable, really.
These bars are light weight and easy to set up. However, the measurements in the directions were not right to fit them to my vehicle, and they were really difficult to adjust once the bars were on the roof. They seem to be snug on the roof and working well, I did a test drive yesterday at varying speeds and they are secure. They don't cause any unpleasant noise - you'd forget they were on there.
Arrived on time. The product was well packaged. These crossbars are just what I was looking for and look great on my Renegade.
Great product. Successfully assembled and installed it myself in about 3 hours. A more detailed assembly video would be helpful. Other than that; I'm 100% satisfied!
Very well constructed, powder coating will stand the test of time. I am a fan of Thule, their products are excellent and well thought out... I'm impressed!
Thule is an excellent product and the fit on my 2017 Chevrolet Colorado is perfect. The good people at etrailer were super helpful in getting the correct fit parts to me as quickly as possible, especially during a tough year for all. I’ve found my Thule racks to be the perfect tool to take our kayaks on our adventures!
Got exactly what I needed! Perfect fit on the 2024 Q7.
The feet are very sturdy and nice to put a strap around. The instructions didn't match the picture of what I was buying because they had a 28in gap between the front and the back feet but I actually needed more like 4 ft. so you can see I used something more like what the picture of a Leaf setup was on the etrailer website. The instructions were a little bit unclear about how the ridge on the bottom of the feet are to sit in the channels on top of the car but on the back rail I had to set the feet way outside the channels anyway. Still seems to be pretty solid
Cross bars have been working very well. No issues with them
It is great. I love appearance of the Thule roof rack that I install today.
Even though these were the Thule Aero bars instead of the older square bars, they produced significant wind noise and I removed the roof rack and installed a hitch instead.
Korren @ e-trailer found these longer bars for me and I'm enormously grateful for her doing so!!
I bought the Thule Evo Roof Rack to transport my kayak on my Lexus 300H. Thule will advise you on their website that his particular rack is not right for a Lexus 300H (i.e., they don't make a roof rack for a Lexus 300H); it is really for a Camry, but etrailer told me that is worked, I trusted them and they were correct. After all, a Lexus sedan is really a fancy Camry, but Thule will not acknowledge this point. It works great. Thule makes a solid product.
Easy to install and hold crossbars very securely.
Product arrived quickly. Easy to install. Works as expected.
Excellent product from Sweden. Well made, perfect fit, great directions, easy to install. Amazingly strong, secure installation on 2013 Honda Accord. Exceptionally strong and secure fit for a gutter-mounted roof rack! Only small unavoidable issue is that the gutter clamp pushed the Honda door rubber seal strip outward slightly, but likely not enough to cause rain to leak around top of door seal.
Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
Thule Accessories
Fit to this rack on your 2022 Jeep Grand Cherokee WK - old body
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jeep Grand Cherokee WK - old body Accessories
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.