2027 Hyundai Santa Fe Mud Flaps

Hey, Dave! Happy to help! You want to pick up #WT110108 for the front and #WT27JD for the rear. If you happen to have any sort of steps or running boards, you will want to make sure that there is at least 2" of clearance between any step or…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to use the Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2-1/2" Hitches part #ERT00110 you'll need a ball mount with extended length shank. For a 2-1/2" hitch, the best option we have would be the BulletProof Hitches…

Hi David, Rock Tamers require an inch of space on the ball mount shank in order to mount. If the portion of the shank exposed where you'll be installing the Rock Tamers is 2" x 2" then you'll want #ERT00108, for 2.5" x…

Hey Chris, so you don't have the needed shank clearance to use the Rock Tamers part #ERT00110 so you could find a ball mount that has a longer shank to allow it to fit or you could go with something like the Access Mudflaps part #A89TJ that fits…

Hey Otto! There's no difference, that's just how our website breaks down which parts fit what vehicle. The Access Rockstar Commercial Grade Mud Flap item #A48VA fits 2023 Ford F-450 duallys with or without fender flares. There is no size…

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The correct Rock Tamer Mud Flaps for a 2020 Chevrolet Silverado 2500 is part #ERT00108 for 2" hitch receivers or part #ERT00110 for 2-1/2" hitch receivers. If you don't know what size trailer hitch receiver you have, just measure the…

Hey Eric, the Furrion Chill Cube part #FR59TD will do a great job replacing your Coleman but it needs to use all of it's components to install and none of your Colemans which it sounds like you already are aware of. Your thermostat will work fine…

Hi Duane, Air Springs are better for leveling loads and will typically give you a rougher unloaded ride quality so these might not be the best option for your setup depending on what your intended use is. Air springs are the best option when it comes…

Yes, there is. It is the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit item #BWGNRK1320. This hitch has been recently confirmed to fit the 2025 Ram 2500s. There was some concern about the exhaust being changed from…