1997 GMC C/K Series Pickup Replacement Mirrors

Hey John, what dimensions specifically of the Curt A20 fifth wheel hitch part #C54VJ are you looking for? The height range of the hitch is between 17-1/2 and 21-1/2 inches which is normally the dimension people are looking for.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey John, thanks for reaching out! The correct Curt A16 5th wheel hitch fitment for your 2010 Toyota Tundra is the Kit #C57VJ, and that's if you have the 6-1/2' bed. This comes with a custom bracket mounting kit so you'll have minimal…

The CIPA Custom Towing Mirror - Driver Side #10801 that you referenced (which is also available in a set with part #CM10800) is confirmed to fit the following vehicles: 2002 - 2006 Chevrolet Avalanche 2000 - 2006 Cadillac Escalade 2002 - 2006…

I'm certainly sorry to hear that someone kicked off the driver's side mirror of your 2007 Acura TL, though I can verify for you that the mirror you asked about is a fit for your car, and it is indeed for the driver's side: - K-Source…

Good day Brooke! That's a valid question as we just started carrying the Aluma-Tow ball mounts (Aluma-Tow 360 Adjustable 2-Ball Mount - 2" Hitch Silver #UR45PR and Black#UR95PR). They are very comparable in quality to the Trimax Adjustable…

No, it does not. The Passenger Side K-Source Custom Extendable Towing Mirror item #KS62073G tilts in slightly to follow the contour of your Sierra 3500's A pillar. I attached a picture below so you can see it installed. It's slight but…

Although I have not heard of the CIPA Universal Fit Towing Mirror CIPA Universal Towing Mirrors part #CM11980-2 blowing off when attached properly I can say that the K-Source Universal Towing Mirrors part #KS3891-2 are a much more secure option. The…

We do indeed offer a replacement manual adjust mirror for your Silverado. For manually adjustable mirrors, on the passenger side you'd use #KS62029G, #KS62030G for the driver side. If you click the provided link, you can see a product description…

I do have an option for you but there isn't a drop leg available for the Trailer Valet JXC Trailer Jack part #TV54FR or part #TV94FR. If you're after faster operation or less work then you may want to take advantage of the drill powered…

In regards to the Trailer Valet JXC Trailer Jack part #TV94FR, the distance from the mounting plate to the bottom of the outer tube is 7" which you can see in the photo below. I don't have any confirmed fit caster wheels for this jack but…

The mirror housing of the K-Source Replacement Side Mirror #KSH3661 that you mentioned is made of a plastic with a chrome finish.