Videos
for Vision X
Help Articles
for Vision X
Expert Answers
for Vision X
Hey Cheryl, The only difference between the Vision X Utility Light XIL-UMX4460 and #XIL-UMX4060 is simply their shape/sizing. The 4460 has a square 4-3/4" x 4-3/4" housing and the 4060 has a round 4-1/2" diameter. Both lights have the…
view full answer...Carr offers a license plate relocation/light mount kit #CARR167301 in black and #CARR167303 in chrome that mounts to your bumper. These can hold 2 lights that use 3/8" diameter mounting bolts and installation requires drilling. They also offer a…
view full answer...This light bar is designed to attach to the included mounting bracket, which attaches to existing holes in your vehicle. The Putco High Power Luminix Off-Road Light Bar w License Plate Mount is intended to be installed either way, with the light bar…
view full answer...The Vision X Utility Market Floodlight #XIL-UF32 that you referenced is waterproof and puts out 500 lumens so it would do an excellent job as a reverse light.
view full answer...When the Pipe Mount Swivel Style Trailer Jack with Foot - Topwind - 15" Travel - 2,000 lbs. #DL22682 is fully extended the distance from the center of the weld-on spud to the foot is 29-3/4 inches. When this is fully retracted the distance is…
view full answer...From the center of the pipe mount to the top of the etrailer jack #TJP-2002-Z measures 4-1/4 inches.
view full answer...The side camera (or any of your cameras) can be paired with more than one monitor but not at the same time. You cannot pair your camera(s) to both your 7 inch and your 5 inch monitors. It's basically the same concept as trying to pair two…
view full answer...The Bauer Products Camper Door Lock #BA54FR would work as a replacement for what you have now. It's the exact size you are needing.
view full answer...The Vision X 9007 Halogen Headlight Bulbs with Relay Harness #VX-H9007-R will not effect your daytime running lights. This harness just bypasses the power draw from the headlight switch by pulling power directly from the car’s battery, which will…
view full answer...The trailer wiring would have to be either a 5-way or 7-way as those are common styles that have the reverse light circuit available. It would just be a matter of running that circuit from the trailer wiring connector to the power wire of the light…
view full answer...Great question. Suspension Enhancement Sytems (SES) are intended to assist suspension in good working condition, but will not correct any bowing in your axle or increase the towing capacity of your vehicle. Assuming your vehicle suspension is in good…
view full answer...The marker and clearance lights you have now ground with a single wire hence why you have two wires total, one for power and one for ground. If the marker or clearance light only has one wire then this wire is for power and the light grounds though…
view full answer...
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."