Lamp Guards

Hey Troy! I went ahead and attached the installation instructions for the #TS64ZR as pictures below. You will have to lower the underbody panel, lower the exhaust, and remove/drill holes in the heat shield for installation. Most of the hitches for…

Hey Michael. I do not have a wiring diagram for a 2026 Crown Signia so I can not identify those wires. Your SUV does indeed have PWM system for the LED lights. To install the Curt Powered Tail Light Converter item #C59236, you'll need to use a…

Hello Matt, I was seeing some mixed information on this as well, so I reached out directly to my contact at Firestone to confirm. The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F44XV will fit…

Hey Michael! The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor #F44XV fits both single and dual wheel applications. This kit is confirmed to fit your 2022 Ford F-450 King Ranch Dually. The Firestone air bags are a great choice, they're…

Hey Nina. The ARB Custom Fit Bondi Deluxe Front Bumper item #ARB66DM is not rated to be used for flat towing. I checked our other options that fit your 2023 Jeep Wrangler and we do not have one that is rated for flat towing. To flat tow your 2023…

Hey Norman, Although Curt doesn't specifically say for your vehicle that it interferes or not, there is a chance it does. Any hitch like the #C47HR is installed where the sensor sits on the vehicle. I have seen cases where there has been no…

Hey James, There is not a plug and play option for the 25' Crown Signia, a splice in option is the only available. We have the Curt harness #C59236 for your vehicle. The instructions are also universal since any splice in harness can be used on…

Hi Bill; are you talking about a hitch where only the receiver is visible at the rear like the #C22HR for the Pilot? This is the same hitch pictured below. The Curt Trailer Hitch Receiver #C69RJ is confirmed to fit your 2026 Honda Passport RTL and…

Reese manufactures the OEM 5th wheel/gooseneck hitch for Ford, so the Reese #RP30136 you had looked at is the correct cove for your Ford OEM gooseneck hitch. For the OEM 5th wheel pucks, you'd use the Reese #58199. I've confirmed this with my…

The Reese gooseneck ball hole cover part #RP30136 that you referenced is the correct replacement for the ball hole cover of your 2016 Ford F-350 that has the OEM rail kit.

In order to cover the pucks on a 2015 Ford F-350 you can use the Replacement Puck Plug Covers part #58199. In order to cover the hitch ball hole on a 2015 Ford F-350 you can use the Rubber Hole Cover part #RP30136.

Yes, the correct plugs/covers for the factory prep package on a Ford Super Duty is going to be the Rubber Hole Cover for Reese Elite Series Under-Bed Gooseneck Trailer Hitch part #RP30136 for the hitch ball hole and the Replacement Puck Plug Covers…