2013 Toyota Tacoma Lamp Guards

Hey Pete, we have just what you are looking for with the Firestone Ride Rite kit part #F2255 and then for an automatic leveling compressor kit you'd want the part #F2186-2047 and you'd be set! What will you be towing? My neighbor had a diesel…

Hey William! I don't have a way of knowing how much space there is on a 2023 Gladiator without one here to test it. What I can tell you is that the #FR95DJ measures 2-5/8" long x 50" wide x 21-11/16" tall so you can use those…

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

We no longer carry the Air Lift SmartAir II Automatic-Leveling Compressor System, however I have an alternative that I think works better and is less expensive. It is the Firestone Automatic, Single-Gauge Pneumatic Height-Control Valve w/ Compressor…

The correct Yakima OverHaul HD Truck Bed Ladder Rack for a 2023 Toyota Tacoma with RetraxPRO XR Hard Tonneau Cover like part #RTT-80851 is the part #Y01151-5755. This is an excellent combo which allows you to haul elongated gear on top of your cover…

Generally speaking, most leveling kits lift the front of the truck 1-2" to match the rear as the factory ride height on most pickup trucks nowadays is about 2" lower in the front than in the rear. This is usually to compensate for squatting…

The Curt Trailer Hitch item #C23WR and the Draw-Tite Hitch item #DT48GR are almost identical and are both confirmed to fit the 2023 Hyundai Santa Cruz. The main differences between the two hitches are that the Curt is made in the USA and the…

It sounds like you would like to add a trailer brake controller to your 2022 Hyundai Santa Cruz to use along with the Curt Trailer Hitch Receiver #C23WR. The first thing you will want to add, in addition to the trailer hitch, is wiring. You are going…

Good morning Marc! I am sorry but I have checked with the manufacturer and scoured the internet, however I can not find a picture of the Draw-Tite item #DT66KV installed on a 2024 Chevrolet Equinox EV. What I can tell you is that the hitch receiver…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Greetings Tim; when you choose a WDH you want to go off of the tongue weight of your loaded setup. The best way to find this is to measure with a scale like the #BTBRV44FR. Since you provided the specs for your trailer we can take a guess to help…

I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ for hauling around an in-bed camper with your 2024 Ford F-350 Super Duty. I really like this kit because it has the higher 7,500 lb rating (which you don't…