Change the look of your vehicle by upgrading some of its hardware. This kit lets you replace your factory hood catches with shiny new ones. Polished stainless steel is stylish, durable, and rustproof.
Hi Brad; thanks for pointing this out. I reached out to MORryde and can confirm that the #MR69MR will fit a 2" receiver. I'm not sure where that other information came from saying it wouldn't fit any receiver size, but the part that…
Yes you could use just the carrier and shank of the Fender Mounted Jerry Can Holder for Jeep Wrangler TJ and YJ #MR69MR in the hitch of your 2018 Jeep JL Unlimited if you wanted to. This comes with basically a hitch that attaches to the frame but you…
As long as you have at least 6" of clearance from the center of the hitch pin hole for the OEM hitch to the rearmost part of your 2021 Jeep Grand Cherokee you can definitely use the MORryde Jerry Can Mount #MR69MR for your 2" hitch…
I reached out to my contact at Morryde to verify, and yes the Fender Mounted Jerry Can Holder for Jeep Wrangler TJ and YJ - 5 Gallon - Tall Tray #MR69MR can be used on a standard 2" receiver like you have on your Jeep. Keep in mind, there is…
Hey Tim, thanks for dropping by! It really depends on preference honestly. They are both ( #Y75QD & #Y85QD) the exact same thing, just one installs on the driver side and one installs on the passenger side. These both have 132 sq. ft. of…
Hello Keeve, Great question! Yakima got away with using the name “SlimShady” for quite some time, but eventually, the real Slim Shady stood up and put an end to it all. If you are looking for lots of shade, you are definitely going to want the Yakima…
Hey Jose, do you know how wide the channel is on your trailer tongue? I would go with the Lock N Roll Articulating setup but the correct trailer side coupler will be based on the width of your tongue. I looked up pictures of your 2023 Intech Flyer…
Hi Elliott; the Valterra RV Water Tank #R8048 has three 3/8" threaded fittings on each end of the tank. You can see them in the attached picture, one has a red plug. The tank is only designed to be gravity fed or used with a hand pump, not an…
The MORryde Jerry Can Mount for Jeep Wrangler JK and JKU is capable of carrying a Nato-Style Jerry Can which is 20liters or 5.3 gallons(40lbs depending on can). We carry both the Driver Side #MR86MR and Passenger Side #MR26MR. If you use the RotopaX…
Hey Lorraine, what you'd need is the foot kit part #INTR with the fit kit part #INTR162 and you'd be able to use the Inno Square bars #INB165 on the roof of your 2025 Mazda CX-50! How did you like the Inno rack?
The drawer dimensions of the MORryde Trail Kitchen for Jeep Wrangler Or Wrangler Unlimited #MR83MR are 15-3//4 inch wide by 25-1/2 inch long by 6.6 inches tall.
Hello Kristi, thanks for reaching out. The Furrion Chill Cube RV Air Conditioner is only available in the 18K BTU at this time. This particular unit you were looking at, part #LC54DX comes with the AC unit only, but we do offer it as a kit that comes…
Filters
