Trailer Hitch

change make

Select Vehicle Model

  
Trailer Hitch

Available Models for 2006 Chrysler Trailer Hitch


Trailer Hitches

You’ve found the #1 online retailer of aftermarket trailer hitches – the best place to research and shop for hitches.

Just tell us your year, make, and model, and we’ll show you everything we know about the custom-fit hitches available for your vehicle: how they look, how they install, towing capacity, and customer reviews. We'll even show you related products that will help you get the most out of your new hitch.

We carry hitches from the leading brands including Curt, Draw-Tite, B&W, Tork-Lift, and Eco-Hitch. We offer hitches for nearly every vehicle on the road, including the most popular makes and models from Ford, Chevy, GMC, Cadillac, Dodge, Jeep, and Toyota.





Trailer Hitches, Front Mount Hitches, Fifth Wheels, Goosenecks, RV Hitches, and Weight Distribution

Custom fit trailer hitches are available for virtually every vehicle. At etrailer.com we carry rear mount trailer hitches, front mount, fifth wheels, goosenecks, RV trailer hitches, and weight distribution systems from the best manufacturers such as Draw-tite, Hidden Hitch, Reese, Torklift and Curt. You will also find a complete selection of hitch accessories and related products such as bike racks, cargo carriers, hitch covers, ballmounts, and locks.


Hitch Accessories



More Trailer Hitches



Trailer Hitch Manufacturers



Accessories



2006 Chrysler Questions and Answers


  • Parts Needed to Flat Tow a 2006 Chrysler PT Cruiser with Manual Transmission with Stowmaster Tow Bar
  • I, too, drive a manual PT Cruiser! There are 5 items needed to flat tow a vehicle: base plates, tow bar, safety cables, lighting, and supplemental braking. For base plates you can use # 278-1. These base plates are compatible with your Stowmaster tow bar. For safety cables I recommend # RM-643. The coiled design helps keep the cables off of the ground. For lighting, if you will not be towing the vehicle very often, I reocmmend a magnetic light kit, # C-ATL20A. For a more permanent...
    view full answer...

  • Replacement Mount Hardware for a Mercedes Cargo Box Made by Thule
  • I spoke with my contact at Thule and she stated that the Quick Grip Mounts consist of 3 parts. First, there is the assembly itself, # TH05738. There is also a cradle, # TH8523387001, and a slide strip, # TH05401. If additional hardware is needed, there is also screw # TH05728. Thule does have other mounting hardware depending on the cargo box. They have the Replacement EasySnap Mounting Kit, # TH05820, which uses U-bolts like in the pictures on the product page. There has also an...
    view full answer...

  • Trailer Hitch Recommendation for a 2006 Chrysler Town and Country with Stow and Go Seats
  • The most popular trailer hitch for a 2006 Chrysler Town and Country with Stow and Go seats is the Draw-Tite Trailer Hitch, # 75305. This is a 2 inch trailer hitch and the Thule Vertex 2 Bike Carrier, # TH9028XT, will fit. With the trailer hitch installed the center of the hitch pin hole out to clear the rear bumper is approximately 6-1/2 inches. On the bike rack, the center of the hitch pin hole to the nearest part of the rack is 12 inches. So it should clear the the rear bumper. The...
    view full answer...

  • Trailer Wiring Harness for 2006 Chrysler Town and Country with Stow-and-Go Seats
  • Either the Hopkins Plug-N-Tow wiring harness, part # 42235 or the Tow Ready Wiring Harness, part # 118300 would work great with your 2006 Chrysler Town and Country with the stow-and-go seats. Both wiring harnesses attach inline with the existing harness behind the tail light assemblies. I will link you to the installation instructions. You can find the link below.
    view full answer...

  • How to Install Wiring Harness On a 2006 PT Cruiser
  • When you remove the taillight on the passenger side there will be two wire connectors connected to the back of the assembly. The connector connected to the turn signal circuit will connect inline with the wiring connector that has the green wire in it and to the turn signal connector on the taillight. The connector with the red and brown wire will be connected to the connector that operates the brake lights and running lights and will then be connected to that connector on the taillight....
    view full answer...

  • What Fuse Rating is Needed to Protect the 12 Volt Accessory Power Cirucit on a 7-Way Connector?
  • To protect the 12 volt accessory power supply circuit, we recommend using a 40 amp inline circuit breaker, part number 9510.
    view full answer...

  • Engine Oil Cooler and Transmission Cooler Recommendations for a 2006 Chrysler Town and Country
  • Because there is not a lot of space in the engine compartment on a lot of vehicles, I usually gravitate towards a smaller stacked plate cooler because they take up less space. For your 2006 Chrysler T and C, I recommend the Derale Stacked-Plate Engine Oil Cooler Kit, # D15602. This cooler measures 13 inches wide, 4-9/16 inches tall, and 2 inches deep. It comes with multiple engine thread types so you will just need to use the one that fits your specific engine size. For a transmission...
    view full answer...

  • Will The Thule Locking Cylinders, # TH544, Fit On The Thule Tracker II Feet, # TH430
  • Yes, the Thule Locking Cylinders, # TH544, will fit the Thule Tracker II Feet, # TH430. Thule calls their locking system the One Key System. Any Thule product that says it can use the One Key System would use the same locks.
    view full answer...

  • Adapter Recommendation to Connect Demco Towmatic II Tow Bar to Roadmaster Base Plate
  • The part # RM-038 is the correct adapter you would need to connect your Towmatic II tow bar to the Roadmaster part # 278-1. You would need the entire adapter to safely make the connection so I would not recommend trying to just use a single part of the adapter. Plus the portion you referenced is not available.
    view full answer...

  • Options for Carrying Luggage and Other Cargo with a 2006 Chrysler Pacifica on a Long Drive
  • I checked on using a cargo basket on the roof rack on your 2006 Chrysler Pacifica and found that the cross bars are only designed for Ski and Snowboard carriers. But since you have a roof mounted cargo bag, that could be used on the roof, just be sure not to exceed the capacity of the roof of your vehicle, to secure the bag at as many points as practical and to clean the vehicle roof and bottom of the bag before installation. I would recommend a trailer hitch and hitch mounted cargo...
    view full answer...

  • Transmission Cooler Recommendation for a 2006 Chrysler Pacifica
  • A transmission cooler is always a good idea if you are towing. Overheating is one of the biggest causes for transmission failure because your transmission relies on the transmission fluid to stay cool. The added stress from towing a trailer on the engine and transmission will cause the transmission fluid to heat up more than normal. It is a good idea to get the largest transmission cooler possible because transmission fluid cannot be cooled too much, however, you will be limited by the...
    view full answer...

  • Cargo Basket and 20 Cubic Foot Bag for a 2006 Chrysler town and Country with Factory Roof Rack
  • The only roof bag that has over 20 cubic feet of capacity is Rhino-Rack cargo bag # RRLBXL at 21.2 cubic feet. This is a huge bag at 71 inches long, 43 inches wide, and 12 inches tall so it requires a basket that is at least that size to be able to support the bag. For that you will need the Thule Canyon XT, # TH859XT and the extension, # TH8591XT, for a total length of 69 inches which will support the bag well. I have linked review videos of the basket and bag for you. Check the...
    view full answer...

  • Parts Needed To Connect 1994 Coleman Destiny Camper w/6-way to 2006 Chrysler Pacifica w/4-way
  • You will want to use the Brake Controller 7 and 4 Way Installation Kit, part # ETBC7. This will be a good option to use with your 7-way adapter if your trailer is wired correctly. The Black wire is 12 volt power and would connect to the positive battery terminal via 40 amp circuit breaker. The Blue wire is for brake controller output and would be ran up and connected to the Blue wire on the back of the brake controller. White is the ground and would connect to a clean metal surface like...
    view full answer...

  • Difference Between T-one and Plug-N-Tow Trailer Wiring Connectors for a 2006 Town and Country Van
  • The biggest difference between the Plug-N-Tow (TM) Vehicle Wiring Harness, item # 42235, and the Tow Ready Custom Fit Vehicle Wiring, item # 118300, is the manufacturer. The Plug-N-Tow harness is made by Hopkins and the T-One wiring harness is made by Tow Ready. Both of the Harnesses provide 4-Way, vehicle end, trailer wiring connector at the rear of the vehicle and plug inline with the vehicles tail light wiring. While the shape of the connectors may be slightly different they both...
    view full answer...

  • Finding the Reverse Light Wire on a 2006 Chrysler Town and Country to Install Backup Camera
  • To find the correct reverse light wire on your 2006 Chrysler Town and Country you will have to test the wires using a circuit tester such as # 3808. The problem is that vehicle manufacturers could use any color wire at any given time on the assembly line if they run out of the regular color wire they use. This is because there isn't a standard wiring color code. I would get access to the backs of the reverse lights and test the wires coming from the backs of the bulbs to ensure you find...
    view full answer...

  • Will Draw-Tite Trailer Hitch, # 24759, Fit a 2006 Chrysler PT Cruiser Convertible
  • The Draw-Tite Trailer Hitch, # 24759, fits all models of the 2006 Chrysler PT Cruiser including the convertible. I have included a link to the installation details and a video showing a typical installation for you to view. This hitch comes with the pin, and clip. You will need a ball mount. For a ball you can use # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, you can use T-One Vehicle Wiring Harness, # 118462. I have included a link to the installation...
    view full answer...

  • Will Curt Class III 2 Inch Hitch # 13465 Fit a 2006 Chrysler 300C SRT-8 Model
  • I spoke with my contact at Curt and they said that the Curt Class III 2 Inch Hitch, part # 13465 will fit the 2006 Chrysler 300C SRT-8 model. I am including a link to the installation instructions on the Curt hitch. If you will be towing with this hitch you will also need the following items. Draw-Tite Ball Mount, part # 2753 Pin and Clip, part # PC3 Tow Ready 2 Inch Hitch Ball, part # 19258, or Tow Ready 1-7/8 Inch Hitch Ball, part # 19256 Tow Ready Wiring Harness, part # 118406 I...
    view full answer...

  • Signal Flashing Fast, Circuit Breaker Trips on 2006 Chrysler 300 with Trailer Wiring Installed
  • It sounds as if either you have the plugs installed in the wrong locations (not likely), see instructions link, the connectors have a bent terminal or the wiring has been shorted to ground somewhere. You should check all of these situations without the trailer connected. Next, check the trailer lights. The Chrysler 300 circuitry will not support more than one tail light and one turn/brake light on each side of the trailer. If your trailer has additional lighting you will need to use...
    view full answer...

  • Combination Transmission and Engine Oil Cooler for a 2006 Chrysler Town and Country
  • The Derale Combination Transmission and Engine Oil Cooler, # D15902, will work for your 2006 Chrysler Town and Country. The transmission cooler does not have a specific class rating, but will be similar to our Class I rated transmission coolers. This kit is a universal fit and will install on any vehicle that has sufficient space. You will want to check and make sure there is room in front of your air conditioning condenser or radiator to install the cooler. This cooler measures 17...
    view full answer...

  • Parts Needed to Tow a Trailer With a 2006 Chrysler Town and Country With Stow-N-Go Seating
  • To pull a trailer with your 2006 Chrysler Town and Country with Stow-N-Go seats you will need a trailer hitch, ball mount, pin and clip, hitch ball, and the wiring harness for lighting on the trailer. The hitch I would recommend is the Draw-Tite Class III 2-Inch Hitch, part # 75305. This hitch has a gross towing weight capacity of 3,500 lbs. Because the capacity of any towing system is limited to the capacity of its lowest rated component, you will want to check your owners manual to...
    view full answer...

  • Installation Instructions for Draw-Tite Trailer Hitch # 24711 on 2006 Chrysler Sebring Convertible
  • Installation of the Draw-Tite Class I Trailer Hitch for the 2006 Chrysler Sebring Convertible, item # 24711, is fairly simple, you will need to install the hitch loosely in two existing holes and then drill two 1/2 inch holes in the frame rail. The exhaust bolt holes are not used on this vehicle. I have posted a link to the instructions for this hitch and the pictures on the product page should provide some help. Some items you may need to complete your towing setup with Class I hitch...
    view full answer...

  • What is Involved with Installing Curt Hitch C11132 On a 2006 Chrysler PT Cruiser
  • The tow hooks are bolted to the frame using the locations that the hitch will use. We have an installation video of a similar hitch, from Hidden Hitch, being installed on a 2006 PT Cruiser. It is a similar installation, there is a portion about drilling that would not apply to the Curt model. The installer points out the tow hooks and shows how to remove them. He also shows how to lower the exhaust. Make sure to follow the Curt instructions for the C11132 hitch, but you can watch the...
    view full answer...

  • Will Curt Trailer Hitch # 11132 Fit a 2006 Chrysler PT Cruiser Convertible
  • The Curt Trailer Hitch, # C11132, will fit all models of the 2006 Chrysler PT Cruiser which would include your convertible. I have included a link to the instructions for you. If you plan on doing some towing, the correct ball mount is # C45520 and you can use pin and clip # PC2. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # 118462. I have linked the instructions and a video showing a typical installation of the wiring.
    view full answer...

  • Is a 20 Amp Fuse Included with T-One Vehicle Wiring Harness for a 2006 Chrysler Pacifica
  • For the 2006 Chrysler Pacifica, the 20 amp fuse required for installation of the T-One Vehicle Wiring Harness, # 118303, is included with the harness. I have included a link to the installation details and a link to a video showing a typical installation of this wiring harness.
    view full answer...

  • Hitch and 4-Bike Rack Recommendation for 2006 Chrysler Town and Country with Stow-n-Go Seats
  • Your 2006 Chrysler Town and Country with Stow-N-Go seats can be fitted with either of two classes of trailer hitch: a 1-1/4-inch Class II or a higher-capacity 2-inch Class III type. I suggest a 2-inch Class III hitch since you will using a 4-bike capacity rack which can have substantial weight when loaded. The most popular hitch for your vehicle is the Draw-Tite # 36320 which has a 2-inch receiver opening. I have included an installation video as well as two helpful articles with hitch...
    view full answer...

  • 4-Way Flat Wiring Harness Fit for 2006 Chrysler Pacifica
  • To add a trailer wiring harness to your 2006 Chrysler Pacifica, you will want to use a wiring harness with a converter. The converter works to change the separate taillight wiring on your Pacifica to combined wiring that is used on trailers. To be able to connect your Pacifica to your Jayco trailer that has a 4-Way flat connector, if your Pacifica did not come with a factory 7-Way connector, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118303. This...
    view full answer...

  • Wiring for Lights to Tow a 2006 Chrysler Town and Country on a Tow Dolly
  • There are special wiring harnesses required for flat towing a vehicle. Regular trailer wiring harnesses like # 118300 are not designed to have power flow backwards through them and that would end up blowing the converter (on harnesses with converters) or damage the vehicle wiring and lights on harnesses that do not have converters. It looks like the 2006 Chrysler T and C has a 2-wire system (the turn signals are not separate from the brake lights). There are a couple of ways you can...
    view full answer...

  • Fit Dial Setting for a Thule Archway 3 Bike Rack on a 2006 Chrysler PT Cruiser
  • The FitDial setting for a Thule Archway 3, part # TH910XT is 10 on both sides. Additionally, Thule adds the following tips for attaching this rack to your 2006 Chrysler PT Cruiser: - Place your top clips in the gap at the front edge of the top of the hatch. - Place lower clips in the bottom edge of the hatch - Don't use your rear wiper blades while the rack is installed. - Lower arm of carrier should sit on the upper tier of the bumper - Remove the rack when its not in use...
    view full answer...

  • Roadmaster Brake Master Braking System for an RV with Hydraulic Brakes Only
  • If your RV has hydraulic brakes only then # RM-9160 will not work. Instead you will need Roadmaster BrakeMaster Braking System with BrakeAway for RVs with Hydraulic Brakes - Proportional Item # RM-9060. Or you could switch to a different braking system such as one of the portable models like the Even Brake # RM-9400. I have included a link to all of the portable systems for your 2006 Chrysler PT Cruiser.
    view full answer...

  • Will Thule Archway XT 3 Bike Rack # TH9010XT Fit 2006 Chrysler PT Cruiser and Will Hatchback Open
  • The Thule Archway 3 Bike Rack, part # TH9010XT, will fit your 2006 Chrysler PT Cruiser. You will not want to open the trunk or hatchback with the bike rack installed. Opening the hatch or trunk with bike rack installed could cause damage to the vehicle. If you are planning on using the bike carrier for childrens or womens bikes, I would recommend a frame adapter like the Thule Bike Adapter, part # TH982XT. This frame adapter spans the distance between the seat post and the handle...
    view full answer...





^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.