Trailer Hitch Size:
2-1/2 Inch Hitch Opening
Towing Capacity:
2700 Pound Tongue Weight
20000 Pound Towing
Weight Distribution Towing Capacity:
2700 Pound Tongue Weight
20000 Pound Towing
Trailer Wiring:
2003 Ford F-350 Super Duty Trailer Wiring
With tow package use C55265 for wiring
Features:
...and installation instructions included Lifetime technical support from the experts at etrailer.com Carbide black powder coat finish over protective base coat offers superior rust resistance Sturdy, square-tube...
Installation Notes:
No drilling required for installation
Spare tire will need to be lowered or removed temporarily for hitch installation
Tech Tip:
Spare tires 20" and larger will not be able to be stored in the original location underneath the vehicle.
More Information >Trailer Hitch Size:
2-1/2 Inch Hitch Opening
Towing Capacity:
2000 Pound Tongue Weight
18000 Pound Towing
Weight Distribution Towing Capacity:
2500 Pound Tongue Weight
18000 Pound Towing
Trailer Wiring:
Features:
...point lets you attach a bracket for a 4-way or 7-way plug (sold separately) Sturdy, square-tube design Ball mount, pin and clip sold separately Specs: Receiver opening: 2-1/2" x 2-1/2&quo...
Installation Notes:
No drilling required for installation
If equipped with a factory hitch, the factory hitch will need to be removed to install this hitch
Hitch will fit with full size spare tire stowed under vehicle
Fits all models with standard bumper
Tech Tip:
Product not intended for models with Heavy Duty Suspension. Installation requires removal and relocation of factory electrical bracket and vibration damper, if equipped.
More Information >Trailer Hitch Size:
2-1/2 Inch Hitch Opening
Towing Capacity:
2500 Pound Tongue Weight
20000 Pound Towing
Weight Distribution Towing Capacity:
3000 Pound Tongue Weight
30000 Pound Towing
Trailer Wiring:
Features:
...with weight distribution: 3,000 lbs Cross tube dimensions: 4" x 4" Lifetime warranty With the SuperHitch Magnum, you get a 2-1/2" receiver for heavy-duty towing and...
Installation Notes:
No drilling required for installation
Hitch installation can be made easier by loosening the spare tire, allowing it to be moved as needed
Factory hitch must be permanently removed for hitch installation
More Information >Videos
for Trailer Hitch
Help Articles
for Trailer Hitch
Expert Answers
for Trailer Hitch
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the…
view full answer...I&…
view full answer...If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…
view full answer...Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846.…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your…
view full answer...The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
view full answer...