1998 Ford Ranger Vehicle Engine Heaters

The Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts #KH11813 is a confirmed fit for the 3.5L V6. You should not need to alter the element or clip in any way and doing so is not recommended. You may want to…

Christopher, I did some research, and it looks like it should be by the exhaust on the driver's side of the engine, underneath the driver's side door. Immediately behind the driver side exhaust header there is a factory designed hole for the…

I really wish we had the chance to install the Kat's heater #KH13150 so we could provide an install video or pictures but the best is the following written instructions: To install the heater you will first need to drain the cooling system. Then…

Hey Suzanne, looks like you found our Wiper Technologies blade part #WPR55FR which is 32 inches long and uses the same j-hook style connection as what your Ford F-53 has so it would work well for you.

The correct replacement for an Atwood Water Heater GC6AA-9E is the Dometic RV Water Heater part #DMC74FR. This is a 6 gallon water heater that works with both gas and electric just like the one you have so it will be an exact match.

The correct engine block heater for your 2017 Toyota RAV4 Limited with the 2.5L I4 engine is the Kat's Heaters Custom Fit Engine Block Heater part #KH11813. According to Kat's, the block heater will need to be installed on rear left potion of…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

We have a large selection of battery heaters, which I have linked below, that are designed to work with certain size/model batteries. In terms of physical size the largest heating pad style heater we have is the Kat's #KH22600 which measures 18…

The Kat's Heaters Custom Fit Engine Block Heater #KH11813 is the correct option for your 2022 Toyota Tacoma with the 3.5L V6. I have linked an installation video we did on a 2016 Tacoma for you to reference and see where the heater will install.…

The Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts #KH11813 is a confirmed fit for your 2008 Scion tC. To install: 1) Locate cartridge hole on the engine block. 2) Clean cartridge hole of all debris. Use…

Hello Hans, I am a little confused because you have a 2012 Ford F-250 in our fitguide, but the drtt3500d which is our part #T94VR is designed for 2010-2013 Ram 2500 and 2010-2025 Ram 3500; the drtt3500e our part #TDRTT3500E is designed for 2014-2025…

Hello Robert, thanks for reaching out. The Kat's Heaters Custom Fit Engine Block Heater #KH11812 is what we recommend for your 2023 Hyundai Tucson 2.5L. This is a cartridge style heater that will clip on to the cavity of the engine block. The…