Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Features:
Aries front inner fender liners help protect your Jeep's engine compartment against mud, water, and other debris. Lightweight, rust-free welded aluminum construction.
Installation Notes:
Drilling required for installation
Tech Tip:
Designed for installation with Aries front fender flares AA32FB.
More Information >Fender Trim Specs:
Features:
Outfit your Jeep Wrangler JL or Gladiator with Aries front fender flares. Included LED lights provide extra visibility from the front and sides, and function as running lights and turn signals. Lightweight aluminum construction is rustproof.
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Features:
Aries rear inner fender liners help protect your Jeep against mud, water, and other debris. Lightweight, rust-free welded aluminum construction.
Installation Notes:
Drilling required for installation
Tech Tip:
Designed for installation with Aries rear fender flares AA92FB.
More Information >Fender Trim Specs:
Features:
Aries inner fender liners help protect your Jeep against mud, water, and other debris. Includes front and rear liners. Lightweight, rust-free welded aluminum construction.
Installation Notes:
Drilling required for installation
Tech Tip:
Designed for installation with Aries front (AA32FB) and rear (AA92FB) fender flares.
More Information >Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Videos
for Fender Trim
Help Articles
for Fender Trim
Expert Answers
for Fender Trim
For your 2015 Jeep Wrangler Unlimited Sahara we have the Rampage Mass Articulation Front Recovery Bumper #RA88509 that fits which has 1-inch D-rings so you could use the D-Ring adapter part #BX88358 with your Blue Ox tow bar.
view full answer...Yes, there is! To install the Redarc Tow-Pro Elite Brake Controller item #RED63RR in your 2023 Subaru Ascent you will need the Plug-In Wiring Adapter for Electric Brake Controllers item #3062-P. The brake controller port will be underneath the dash…
view full answer...The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…
view full answer...Congrats on the new trailer! You will need a sliding 5th wheel hitch. A standard fixed hitch like the Curt A20 item #C16140 won't provide you with the necessary clearance you'll need. You'll end up running the nose…
view full answer...It is always smart to replace any components that have received damage as some damage might compromise the integrity of your equipment. I also recommend inspecting the rest of your tow bar for any other signs of damage. The Swivel Collars used to…
view full answer...For your 1997 Ford F-350 XLT you would need #21007-92230 for a rear chrome bumper. We do not carry front bumpers at this time.
view full answer...The battery of your 2023 GMC Sierra 1500 Denali does need to be disconnected like you mentioned. We have an automatic disconnect that we have installed on a similar Sierra with the part #RM-766 which I attached an install video for on this page.…
view full answer...The E-Track has slots that have a length of 2.45-inches and a width of .58 inches. See attached diagram.
view full answer...For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…
view full answer...The Curt Double Lock #C60712 is designed to fit various GM trucks so we need to look for a different solution for your 2023 Ram 3500. Normally the chassis version of a pickup has a bit of a different frame design so for your application I recommend…
view full answer...Since the Putco Stainless Steel Chrome Fender Trim #P97285 are a universal fit, I spoke with my contact at Putco who said that they haven't had any problems with customers fitting the trim on duallys so it should fit just fine on your…
view full answer...The Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal part #BK3-110 are made overseas as with nearly all trailer bearings. That said, so long as you use some quality grease like the Prime Guard Red Hi-Temp Wheel Bearing Grease part #L24FR and keep…
view full answer...Filter Products (16)
Contact and Help
What our customers are saying:
Excellent service and communication. Expect part to be excellent too!
Tommy
Tifton, GA