Vehicle Style: 3.6L V6 Engine
Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
Cat-back exhaust system has technologically advanced, mandrel-bent tubing and a performance muffler, both of which allow exhaust to flow freely. This improves engine performance, boosting horsepower and torque. High-clearance design for off-roading.
Tech Tip:
Exhaust will not fit on models with plastic rear fascia. Rear fascia would have to be replace with an aftermarket metal fascia.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This cat-back exhaust system has technologically advanced, mandrel-bent tubing and a round front muffler, which allow exhaust to flow freely through the system, boosting horsepower and torque and thereby improving engine performance and durability.
Tech Tip:
Exhaust system does not fit models with rear plastic fascia.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This custom-fit cat-back exhaust system has straight-through mufflers and mandrel-bent tubing that allow exhaust to flow freely through the system. This boosts horsepower and torque and helps to improve fuel efficiency for your vehicle.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This custom-fit cat-back exhaust system has straight-through mufflers and mandrel-bent tubing that allow exhaust to flow freely through the system. This boosts horsepower and torque and helps to improve fuel efficiency for your vehicle.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This turndown exhaust system is specially designed for installation on vehicles with highly modified suspension systems. It has technologically advanced, mandrel-bent tubing and a straight-through muffler to improve engine performance and durability.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This custom-fit cat-back exhaust system has straight-through mufflers and mandrel-bent tubing that allow exhaust to flow freely through the system. This boosts horsepower and torque and helps to improve fuel efficiency for your vehicle.
More Information >Exhaust Systems Specs:
MagnaFlow Exhaust Systems Features:
This custom-fit cat-back exhaust system has straight-through mufflers and mandrel-bent tubing that allow exhaust to flow freely through the system. This boosts horsepower and torque and helps to improve fuel efficiency for your vehicle.
More Information >Videos
for Exhaust Systems
Help Articles
for Exhaust Systems
Expert Answers
for Exhaust Systems
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailerā¦
view full answer...Hey Brad, yeah you would need a hitch extender with the Thule ReVert bike rack part #TH83VA to allow the tailgate of a full size truck to open. For that we have the Gen-Y Hitch Extender part #e88YR which is 8 inches long. What kind of bikes will youā¦
view full answer...Chevy stopped using a port to plug in a brake controller after the 2006 model year. The tow package wires to install a brake controller are still present up under the dash, to the left of the steering column, held together with a white tag. The wiresā¦
view full answer...Hello Phillip, thanks for reaching out. Yes, the Reese Dual Cam #RP26002 WD system can be used with a Reese Friction Sway Control #83660. As long as the head of your WD hitch has the pre-welded tab for the sway control ball (pictured below), theā¦
view full answer...The inner diameter of the expanded ends of the part #CAM44812 is 1.53 inches and the outer diameter of the non expanded end is 1.51 inches. So basically this setup is designed to either slip into a 1-1/2 inch pipe or slip over a 1-1/2 inch pipe.
view full answer...I have attached a drawing from the installation instructions for the rail kit part #C16430-204 you can check out. As you can see in the attached drawing I noted the carriage bolts and where they are located on the rails when installing. Please noteā¦
view full answer...The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5thā¦
view full answer...We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.
view full answer...If you already have the B&W Gooseneck Hitch #BWGNRK1111 on your 2015 Ford F-250 then you will need to get a different hitch as that one is not compatible with a 2017 F-250. For your 2017 Ford F-250 you will need to use B&W Gooseneck Hitchā¦
view full answer...Kelsey is not in business any longer so direct replacements are not available, but I can tell you how to go about trying to find the correct replacement hub and rotor/disc brakes for your trailer. In order to find the correct replacement hubs forā¦
view full answer...Yes, we do offer replacement bolts and hardware for the Thule TracRac TracONE Truck Bed Ladder Rack item #TH27000XT. I have listed them below: Replacement 3/8"-16 x 3" Button Head Cap Screw for Thule TracRac One item #TH28FK Replacementā¦
view full answer...I have attached a photo of the EcoHitch Hidden 2 Inch Trailer Hitch Receiver installed on a 2012 Ford Focus Electric. The hitch is designed to fit 2012 through 2014 Ford Focus Electric vehicles. If you're in the market for a bike rack, theā¦
view full answer...Filters
7 results