When your engine spins counter clockwise, reverse rotation radiator fans keep the pull through the radiator. A serpentine belt is a common sign of counter clockwise rotation, so confirm your direction and then measure your existing fan to match diameter and clearances.
No, flipping a reverse-rotation mechanical fan isn't a solution. The blade curvature can contact the radiator and won't move air correctly. If you need a pusher setup, use a dedicated pusher fan assembly and check mounting clearance first.
Measure your existing fan's diameter and confirm reverse rotation. Check clearance to the shroud and radiator, and that the fan matches your clutch or spacer pattern. When parts are hard to locate, noting that yours is reverse rotating and counter clockwise with a serpentine belt will narrow choices quickly.
Check the direction your fan turns while facing the motor. If it turns counter-clockwise, you need reverse rotation. A general rule: vehicles with a serpentine belt use counter clockwise or reverse, while a V belt is standard rotation. Confirm rotation before ordering so the blades move air the right way through the radiator.
Choose by diameter and RPM more than blade depth. For low speeds, shoppers have seen reverse-rotation fans move a lot of air and help keep gauges lower. If the car runs hotter on the highway, adding an electric radiator fan can help; make sure there's enough space for an electric fan in front of the radiator.
Often yes, reverse-rotation clutch fans fit most factory clutches. Verify your clutch is for reverse rotation and match the fan's bolt pattern and diameter. Some fans are not designed to attach to a fan clutch, so confirm mounting style before installing.
17 Inch Diameter
18 Inch Diameter
Filters
