Belt-driven puller fan does not have a clutch, so it spins at 100 percent of the water pump speed for better cooling at high rpm. Curved, stainless steel blades offer increased airflow at idle, and they flatten out at high rpm to reduce engine drag.
Note: If your application requires spacers for installation, you must use Flex-a-lite spacers (sold separately) to preserve the warranty on the fan.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com, and today we're gonna take a look at this Flex-a-lite belt-driven, reverse rotation, silver stainless steel, 17 inch flex fan. Now, if you are looking for a belt-driven puller fan that does not have a clutch, this might be the fan that you need. This belt driven puller fan does not have a clutch, so it spins at a hundred percent of the water pump speed for better cooling at high RPMs. This curved stainless steel blades offer increased airflow at idle, and they flatten out at high RPMs to reduce engine drag. By the way, this is rated at 10,000 RPMs and the fan diameter is 17 inches and you're gonna have six stainless steel blades that feature a premium silver finish. The pilot is 5/8 of an inch and the bolt pattern is 1 3/4 inches to 2 1/2 inches.
Again, this is belt driven, reverse rotation. This is made in the USA. Now it is important to note that if your application requires spacers for installation, you must use the Flex-a-lite spacers which are sold separately to preserve the warranty on the fan. If you need those spacers, you can find them on our website using item number FLX14556. Well, that's gonna conclude our look today.
I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.