MORryde 26 inch wide cargo slides make it easy to reach toolboxes, ladders, and other gear in tight bays. Listed widths run 1/4" narrower to help clear door openings, and a height adjustment kit can raise the tray 2-1/2", 2-3/4", or 3-1/8" to get over a compartment lip. Choose 1-way or 2-way slide options for access from one side or both.
Yes—install is straightforward, but take your time. Make sure the frame is square before driving fasteners, and having two people helps. Inspect under the floor for tanks, wiring, or other items before drilling. Verify the lock engages fully after install to help prevent movement, and if you notice a little play when locked, adding rubber stoppers can reduce clunking.
One 72 inch x 26 inch MORryde tray sits 1.6 inches above the mounting floor. If you need more clearance, the Height Adjustment Kit raises the tray 2-1/2, 2-3/4, or 3-1/8 inches. Also check for a mid cross support under the tray; if it contacts your door lip, a small spacer (about 3/8 inch) may be needed to help clear the opening.
Pick 2-way if you want access from both sides; pick 1-way if you only pull from one side. These trays extend 60 percent, so confirm you can pull out far enough for what you store, like toolboxes, ladders, or a fridge. Make sure the compartment layout allows a 2-way pull if you want both-side access.
Yes, plan on the tray being 1/4 inch narrower than listed. A 26 Inch Wide MORryde tray is about 25-3/4 inch actual width. Measure the narrowest point of your door opening and check for obstructions like intakes, fuse panels, and the door lip. If you're close on height, account for the tray sitting above the floor and any needed lift to clear the lip.
36 Inch Long
48 Inch Long
60 Inch Long
72 Inch Long
90 Inch Long
Filters
