Go for a clean look with white RV exterior lights from Diamond. Installs are straightforward on many swaps; if your old fixture is a different size you may need to drill new holes. You'll find bright LED upgrades and porch lights with outside switches, and Diamond has a track record as being reliable and long lasting.
Yes, installation is typically straightforward. Compare your old light's overall size and mounting hole spacing; some installs required drilling new holes when the new light was slightly larger. Check that there's room behind the fixture for wires. If no base gasket is included, plan a thin bead of sealant or add a gasket to help keep moisture out.
Yes, LED strips have been installed in existing fluorescent fixtures and worked great. Follow the instructions and wiring diagram carefully; the illustrations can be small, so take your time. Verify there's enough room inside the housing for the strip and wiring before committing to the retrofit.
Yes, they can be much brighter than older incandescent porch lights while drawing less power. Expect a noticeable boost around doors and steps. Some versions tilt toward the ground for better coverage. Verify the light output and switch location to match how you use your porch or utility area.
They can work very well when they get proper sun. An accessible switch helps you turn the light off when the trailer is moving. 3M VHB tape can simplify mounting (not included); clean the surface first. Watch for motion set off by insects and reduced charging under an awning; you may need direct sunlight to recharge fully.
Confirm there's a lens seal or base gasket, or plan to seal the edges to help reduce moisture. Some fixtures did not include a gasket. Also check wire routing space behind the light and match wires by function if conductor colors don't follow your RV's convention.
Porch Light
Strip Light
Utility Light
RV Exterior Lights Parts or Accessories
Filters
