The 5th Airborne Premium 5th Wheel Air Ride King Pin w/ Sidewinder and Turret - 16,000lbs Item RP61452 is the correct replacement for your M-Tec RVPN1409 and you are correct that the B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter…
Based on the dimensions you listed we have the part #010-180-00 which would fit and work well. This has an outer diameter of 2.33 inch and an inner diameter of 1.68 inch like you need so it would work well.
Hello Francis, thanks for reaching out. That is a pretty tall order. The strongest hitch extensions we offer are the TorkLift SuperTruss Hitch Extensions like part #TLE1548 (10,000 lbs towing 500 lbs tongue weight). These can only be used with a…
Using the hitch extension will reduce the tongue weight capacity of the trailer by 50 percent. But if you have a 2 1/2 inch trailer hitch receiver and use the Titan hitch extension #RP45292 the tongue weight capacity will not be reduced. At the 24…
Hey Jim. The Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR is indeed compatible with the LED lights on your 2025 Jeep Wrangler Unlimited. It plugs into your factory wiring harness behind the tail lights. The only issue would be if…
Hey James, welcome back! The only plug and play wiring harness I have for flat towing is the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR. This has a 4-way connector that plugs into your motorhome. This plug and play harness…
The Smart Diode kit #RM47ZR you installed is designed for use with Gladiators that have ParkSense Proximity Sensors with LED lights. If you don't have these sensors or you have incandescent lights then that could be a possible cause for the…
Thanks for all of the information Brent! You have done your home work extremely well. Let me reassure you that as long as your Newmar Dutch Star has a fully functional 7-way connector you won't need to address anything on your RV as far as wiring…
That is correct, if you have ParkSense proximity sensors then you'll need to install smart diodes #RM47ZR and would still need a 6-pole socket and adapter cable #RM-146-7 to connect your 2021 Jeep Wrangler Rubicon 4XE to the motorhome. The…
Yes, you can still use the Smart Diodes #RO54FR from the Wiring Kit #RM47ZR on your 2022 Jeep Wrangler 4xe. These will still operate your standard tail lights just fine even without having the ParkSense feature.
It is a bit difficult to see in the picture, but there are mounting holes in the 4 tabs along the sides of the #YR1203SY keel pad. You would just need to screw through the tabs to the sides of the cross member. We do not offer any hardware…
Received order, shipping and service was very fast. Thanks
Kurt
St. Louis, MO
Rampage Cup Holders for on-the-go comfort
Built sturdy and straightforward, Rampage cup holders keep your drink where you need it. A Velcro strap setup can cinch to bars or around mirror mounts and tightens with a simple fold, and they've even been put to use on boats. A no-fuss pick when you want holders that work hard and feel well made.
Yes, they work great on a boat. Just make sure there's a spot where the Velcro can wrap fully and grip, similar to a roll cage or rail. Check the diameter of your mounting surface against the Velcro reach to ensure a solid hold.
They attach with Velcro straps for a straightforward install. For a tighter fit, route the upper strap around a side mirror mount if needed and triple "S" fold the bottom strap to remove slack. Confirm the strap path is clear so the Velcro can align and hold well.
They're well made and very well built. Expect a sturdy feel that handles everyday use. Before final placement, test-fit the straps to confirm they cinch tightly on your chosen mounting point.
Yes, they're designed to Velcro to a 5 inch in diameter roll cage. If mounting near a side mirror, run the upper strap around the side mirror mount to get a snug wrap. Triple "S" fold the bottom strap to take up slack and tighten. Check that your mounting point allows the Velcro to fully wrap and grip.
Filters
