Catalytic Converters Specs:
Features:
This catalytic converter kit is engineered to speed up exhaust breakdown and uses mandrel-bent tubes to boost airflow through your vehicle's exhaust system. As a result, horsepower and torque are increased. Not CARB compliant.
Installation Notes:
Product replaces the front converter
More Information >Catalytic Converters Specs:
Features:
This catalytic converter kit is engineered to speed up exhaust breakdown and uses mandrel-bent tubes to boost airflow through your vehicle's exhaust system. As a result, horsepower and torque are increased. Not CARB compliant.
Installation Notes:
Product replaces the rear converter
More Information >Videos
for Catalytic Converters
Help Articles
for Catalytic Converters
Expert Answers
for Catalytic Converters
For the Everchill refrigerator part #WAY44FR there is an electronic display that allows you to adjust the temperature of the fridge and freezer. I attached a picture that shows what it looks like for you to check out and see how the adjustments are…
view full answer...Lippert Components purchased the Everchill line so we finally have some manufacturer support for the Everchill RV Refrigerator w/ Freezer Drawer #WAY44FR. I've attached the manual below to help you out.
view full answer...The clip that you are referring to that holds the 7-way plug to the socket is typically found on the connector which is why the #HM40940 does not come with it. I wish we sold that piece by itself but only way to get it is to go with a new harness…
view full answer...From what I have found, the ALKO hub and drum assembly you have is for 7,000 lb axles. I believe the Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2 #8-219-4UC3 will work as a replacement. This has the…
view full answer...If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…
view full answer...The Shackle Strap part #TRSL350 comes as a single strap. There should be 2 shackle straps per spring on a single axle trailer. You would need to order 4 of the part #TRSL350 for a single axle.
view full answer...We only have the #TRSL350 for a shackle that is 3-1/2 inches long from hole center to hole center. Typically these don't wear out as quickly as you described. Are you tightening the shackle bolts really tight which is causing added friction…
view full answer...The Inno Box 2020 Rooftop Cargo Box #IN86FR will fit as long as you have the required 24"-39" crossbar spread. You will need to measure to be sure. Also yes, this will fit on the Inno Aero Crossbars #INXB130-2.
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...To flat tow your 2010 Chevy Silverado 1500 you will need to first start with a base plate kit. For that the most popular option is the Roadmaster #3154-3. In addition to the base plates, you will also need a compatible tow bar, safety cables,…
view full answer...You'll need to do some slight measuring to ensure the fit of the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F95FV on your 4WD 2022 Ford F-350 FX4 dually. Just measure from the top of the rear axle to the top of the…
view full answer...The UFP 34044 is basically the Dexter DX7.5L A-60 part #DX89FR. The second number you mentioned is actually a phone number. But the #DX89FR would be an exact replacement for what you have.
view full answer...Filter Products (4)
Contact and Help
What our customers are saying:
Quick processing, and delivery. reasonably priced very satisfied
Bernie
Krakow, WI