Bumper Specs:
Features:
This sturdy steel replacement bumper has a thick, molded polymer step pad that wraps around the bumper for superb grip as you step into and out of your truck bed; built-in hitch ball holes; and an 8,000-lb capacity. Custom mounting kit included.
Installation Notes:
Bumper does not fit on Stepside/Flareside models
More Information >Bumper Specs:
Features:
This sturdy steel replacement bumper has a diamond tread surface to provide grip as you step into your truck bed, built-in hitch ball holes, and an 8,000-lb capacity. Chrome plating adds style and resists rust. Custom mounting kit included.
Installation Notes:
Bumper does not fit on Stepside/Flareside models
More Information >Bumper Specs:
Features:
This sturdy steel replacement bumper has a non-slip pad along the top for grip as you step into your truck bed, built-in hitch ball holes, and an 8,000-lb capacity. Chrome plating adds style and resists rust. Custom mounting kit included.
Installation Notes:
Bumper does not fit on Stepside/Flareside models
More Information >Bumper Specs:
Features:
This sturdy steel replacement bumper has a diamond tread surface to provide grip as you step into your truck bed, built-in hitch ball holes, and an 8,000-lb capacity. Powder coat finish resists rust. Custom mounting kit included.
Installation Notes:
Bumper does not fit on Stepside/Flareside models
More Information >Bumper Specs:
Features:
This sturdy steel replacement bumper has a non-slip pad along the top for grip as you step into your truck bed, built-in hitch ball holes, and an 8,000-lb capacity. Powder coat finish resists rust. Custom mounting kit included.
Installation Notes:
Bumper does not fit on Stepside/Flareside models
More Information >Videos
for Bumper
Help Articles
for Bumper
Expert Answers
for Bumper
I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...We do have a compatible grease seal for your 168255TC oil seal, however, we do not carry rubber coated seals in this size. The 168255TC oil seal was designed to work with oil bath hubs on a 3,500 lb axle. For the most part, axle manufacturers have…
view full answer...To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…
view full answer...As it seems you already know, when installing a trailer brake controller on your 2007 GMC Yukon you will need to locate the two wires under the hood that need to be connected to fully activate the…
view full answer...A #93 incandescent bulb has a single contact bayonet base, and there are a couple of options for LED bulbs that will replace these. You can choose a bulb that gives off either a warm or cool light; I have added a photo showing the difference…
view full answer...You'd need a new panel like the Progressive Dynamics Mighty Mini part #PD4045KA which is the most similar to your Parallax 7345 except is Lithium battery compatible. There…
view full answer...I spoke with my contact at Progressive Dynamics and they informed me that the Lithium Converter for WFCO RV Power Centers part #PD4655LIV does work as an upgrade for the Parallax 7355. It has the same housing as the Replacement Converter for…
view full answer...Having the extra amperage of the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K has no down side. You'd at worst just have more power…
view full answer...Thanks for submitting the picture of the lights you are looking for. Based on that it looks like you are in need of a 194 bulb like the part #A194B.
view full answer...The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…
view full answer...Looks like you have an older version of the 21007-92230 that you referenced which fits the following: 1973 - 1991 Chevrolet C/K Series Pickup 1973 - 1991 GMC C/K Series Pickup 1967 - 1983 Ford F-100, F-150, F-250, F-350 Standard Bed models 1992 -…
view full answer...Hey there Jason; for your 1977 Ford F-100 we do have a diamond step chrome rear bumper that fits, so long as you have the standard bed. What you need is the following: - Westin Fey Diamondstep Rear Bumper - Chrome Plated Steel #21000-92230 This…
view full answer...Filter Products (10)
Contact and Help
What our customers are saying:
Thanks for the great service. The order arrived at my doorstep yesterday afternoon. Thank you for making sure the order was complete. I installed the hitch and wire kit last night with no problems. The instructions were perfect. Bruce
Bruce
Maplewood, MN