2012 Jeep BOLT brand vehicle and hitch locks

Hello David, thanks for reaching out. I will need more information on your camper shell in order to know what locks will work. Can you provide the model number from your shell? That will help a lot to narrow things down. For example, if your ARE…

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

Hey Tim, The adapter rails for GM's towing prep package that your SuperGlide #PUL63RR will mount to are under part #PUL69RR (4452).

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes, it will so long as your Ford key looks like one in the picture below. The Replacement Lock Cylinder for BOLT Toolbox Latch item #BLT79FR only works with Bolt tool boxes. If not you will need item #BL7022698.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

A 2016 Chevy Colorado should have a center cut transponder key so you would need the Replacement Lock Cylinder for BOLT Toolbox Latch - Codes to Center Cut GM Key #BL7023480. This is just the replacement lock cylinder so if you're needing parts…

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4…

Hey Brandon, great question I can tell you've done your homework. Since you have a 2024 Chevy Silverado 2500 the correct side plate kit you'd want is the part #DM49GV. The part number you mentioned of #DM6004 would not work as it was designed…

Hey Devin! For 2001 Ford F-350, you'll need the Replacement Lock Cylinder for BOLT Toolbox Latch item #BL692917. This ones been confirmed to work with your truck's ignition key. I have linked a picture below showing the keys the item…

Hey Robert, I have a front hitch solution that will work for your 2024 Ford F-250 with the Draw Tite hitch part #65076 but the EcoHitch you referenced does not fit the diesel models so it would not work with you. What will you put in the front…

I would love to help but I can't really tell you if you need the B&W Tow & Stow 2-Ball Mount with 5" Drop part #BWTS20037B (part #BWTS20037C) or 7" Drop part #BWTS20040B (part #BWTS20040C) as it varies by application so you will…