What our customers are saying:
very easy to shop
Mike
Richmond, CA
Videos
for Truck Bed Mats
Help Articles
Expert Answers
Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…
The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system…
Yes it is. The Black Armour Heavy-Duty Custom Truck Bed Mat item #BA67AR does come in two parts. This mat is confirmed to fit the 8' bed length of the 2022 Ford F-250. We do have a one piece option for a custom fit rubber bed liner for your…
Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.
The Westin Custom Fit Truck Bed Mat #50-6405 will fit perfectly in your 2022 Ford F-250 Super Duty Short Bed and you won't need to trim anything! Just be mindful that these come rolled up in a box so you'll need to unroll it and let it rest…
When a camper is loaded on a pickup truck bed there will be a gap between the truck bed rails and the underside of the camper as you show in your photo. No worries there. For your camper tie-downs, it loos as though you have attached the rear ones…
There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…
You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
Hey Alban, since you have a Blue Ox tow bar #BX7365 already and their flat towing setups are really nice and easy to use I would recommend going with a Blue Ox base plate kit like the part #BLU85CR which is a fit for your 2024 Chevy Colorado. For…
Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for. For the front, you'll want the TorkLift Camper Tie-Downs #TL87CR (TorkLift P/N…
