# 1
Dexter Zinc-Plated Brake Actuator - Drum - 2-5/16" Ball - Bolt On - 8,000 lbs
After 36,000 miles on my boat trailer, my previous Dexter Brake Actuator was looking pretty worn. A replacement was needed. Easy to install - just two bolts, filling the brake fluid reservoir and connecting the brake line.
Product is exactly as advertised. The team kept me well informed of delivery. Definately recommend shopping at etrailer!
# 2
Dexter Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs
Awesome coupler. My trailer is a 1990 and the old coupler was welded on. Had no other option than to weld the new coupler on. Came out great and works perfectly. Made my own brake lockout key. See photos below
I received the actuator with no manual. Contacted etrailer.com to get the manual and was told they didn't have but would contact UFP. Nothing from UFP. I contacted Dexter, who apparently bought the line from UFP. They don't have it either. I have it installed but am trying to figure out how to bleed the master cylinder. OLD instructions from UFP are NOT accurate.
# 3
Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
I bought this for a direct replacement of an Atwood surge brake actuator for drum brake application in which they no longer make. Ateoodpart # 85778 is obsolete now guys. This Demo DM72VR fit directly on my 3 inch tube tongue and bolt pattern was the same. Easy fix.
I traveled down to Texas from Canada only to find out that both my brakes an actuator are completely worn out. I was able to source the brakes locally but found out that the Attwood actuator no longer was available. I searched the internet and immediately etrailor came up with a solution. It was easy to order and have it shipped to me. They said it would take 3 days and it arrived as promised. I had it installed in about a 30 minutes. Very easy. The one thing is that nowhere does it say that I needed 4.5 inch bolts to mount it or instructions of how to bleed the actuator. I found this out by reading the reviews of this product. Otherwise I am very impressed with the product and the ease of following my order from start to finish.
# 4
Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
Not a fan because of the screw down and up for ball attachment. Unit Itself works great.
Bolted right on with no problem. Now to pull off the hubs and check the wheel cylinders
# 5
Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs
I put this on an easy loader trailer that had an Atwood master cylinder which is now obsolete. Cutting the old actuator off was a real bitch. Installing the new Dexter actuator was very easy. I could bend the existing brake line 180 and hook it directly up without having to change the end. The bolts were easily available at the hardware store, I wish they would have came with it. The quality of the drop and go hitch is unbelievably easy to use.
This is a nice easy to use hitch. This is the 3rd one purchased for boat trailer hitch replacement. Really like the drop and go feature.
# 6
Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 8,000 lbs
Item is heavy duty and well made. It fit perfectly over my 3" trailer tongue (after much grinding to remove the old welded-on actuator). Item could have been better packed for shipping. It is quite heavy, but had only wadded up paper to cushion it. It bounced around in transit and the plastic plug protecting the output port of the master cylinder was damaged,
nice heavy duty well built actuator, a little modification from my prior actuator but, doable. Thanks
# 7
Dexter Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs
Great product. I replaced my old, ineffective drum brakes with new disk brakes and a new coupler / actuator. Much more effective braking on my trailer now. Well worth the cost and effort to possibly save an accident with the crummy old drum brakes. Even better than the great product is the fantastic service from eTrailer support. I had several questions that they helped me through. They even pulled a caliper from their stock so they could see exactly what I was asking about and helped me resolve the issue. Always prompt, courteous and thorough. I never felt like they were hurrying to get me off the phone. Thanks eTrailer!
Thank you for your fast shipping and low price for the Titan surge hitch for my boat! The free shipping was awesome and very well packaged. This unit is very good quality, well made. I didn't get an owners manual for it but it is available for free online. My only "complaint" is that it is about 10" longer than my previous hitch but it is much better quality and I know it will offer me no problems on lake day. Easy installation. Haven't towed yet but I expect no problems. A+ etrailer.com is my new go to.
# 8
Dexter DX Series Electric Over Hydraulic Brake Actuator for Drum Brakes - 1,000 psi
Got my Brake Actuator so fast. I love that these guys have so much stock, amazing prices, and do customer service the old fashioned way!!! Thank you etrailer.com??
We never got it to operate properly. We ended up removing the entire hydraulic system and replaced it with electric brakes.
# 9
Dexter DX7.5L A-60 Brake Actuator - Bolt On - Drum - 2" Ball - Zinc - 7,500 lbs
Best service ever Shipping was excellent and fast great company will do business again
Easy to install, easy to use, works great.
What our customers are saying:
"Product arrived very quickly. Everything was there and fit properly. I'm very satisfied."