Summer Starts Here - Save up to 70%
# 1
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
Be warned! I would not buy from Etrailer ever again. We received our order and Etrailer failed to send the entire trailer axle kit. They did not include one spindle in the kit, rendering our order useless without ordering an additional spindle. Because more than 30 days had elapsed before reporting the issue, Etrailer refused to send the spindle, in addition to insinuating that I was deceiving them. This must be how they increase their revenues…don’t send the entire order, and if the customer does not catch it within 30 days, the customer loses and Etrailer makes more money. Absolutely horrible customer service from the company who failed to fulfill their end of the contract while accusing me of being deceptive. One star is far too generous for Etrailer and their scams.
Very pleased with the design and heavy duty construction of these axles. Used them to build an off-road trailer and they performed flawlessly throughout many challenging trails and off road situations. My only complaint is that the ez-lube hub design does not take grease very easily. I've had to disassemble the hubs to properly grease both bearings due to the inadequate amount of grease flowing into the bearings.
# 2
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2K
Excellent, helpful customer service sold me this product, and trust me when I say it's worth the price tag. Pulled the old axle and leaf spring off a 60's era Bantam and swapped out for this with a support bar in between. Bumped up tires to 315/75r16 BFG TA/KO's to match my rig and am amazed at how much better this trailer now pulls. Empty it wad bouncing all over the place with the old axle and leaf spring setup. Now I hardly even know it's there. Was very easy to install, took a couple hours but I am happy with how it turned out. A+++ product and customer service!
Used this on a camping trailer behind our Jeep. The suspension handled 1000 miles of washboard gravel roads and mild rocky offroading with ease. We don't drive gently and had the trailer airborne at one point. The brackets that we opted to fabricate for them were straightforward and simple to install. I especially like the ground clearance under the trailer that you gain due to the lack of a solid traditional axle. The ride quality overall was excellent, especially given where we took it. In hindsight we should have gotten the 4" travel version as it may have been able to soak up deep ruts at 40mph a bit better. Only mild complaint is that the powdercoating on the leading edges had already begun to flake off when we received the suspension. I hit it with a can of spray paint, but I would have hoped it would be more durable. Overall, I will definitely be purchasing this axle-less suspension again for my next trailer build.
# 3
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt - 2K
Great looking parts, robust design, professional looking welds....Nothing missing... I contacted Timbren prior to my purchase and received a prompt, helpful reply... The supplied instructions are complete and straight forward, i'm confident should i have any issues, contacting them will get them resolved...
Product exactly what I need. People at etrailer where beyond extremely helpful! Great to deal with!
# 4
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt Flange - 2.2K
The service from etrailer has been great! They have been very helpful through the entire purchasing process. My one star is due to the quality of the product. First, for something as heavy duty as these are, you’d expect better packaging. On arrival, one of the spindles was sticking out of the box and the hand holds were torn on one of the other boxes. I was a little worried what I might find in the damaged box but everything seems to be intact. The disappointing part is the quality of the welds. For the price you are spending on these, I would expect a higher quality of fabrication. There is undercut in the welds that hold the three support plates together and big ol sloppy welds every where else. Unsure of what to do as my trailer has been designed around this suspension system.
The customer service has been excellent with Etrailer!!! I got to work with Anna and she did a great job on my order. The product seems to be great, just as Timbren stated. It went together very well on the trailer that I'm building. I can't wait to finish this project and be rolling into the backcountry and staying for a few days.
# 5
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Lift - 4 Bolt - 2.2K
Incredible system. Handled our Overland trek through Colorado and Moab. These axles on our 1917 Ford bed ran multiple Jeep Badge of Honor trails. The suspension handled flawlessly. Handles off camber rocks and drop offs smoothly. We ran the 4 inch lift and off road offset to fit the factory Jeep wheels.
Josh helped guide me to the right product, ensured I had any and all additional items to finish the project. Well done Josh and THANKS!
# 6
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 4 Bolt Flange - 3,500 lbs
The trailer rides great down the road and no more worries about saltwater and rusty leaf springs. Not a cheap option but I’m very happy with the setup. When installing, just be sure to measure accurately and have sharp drill bits. A drill press type of guide also helps ensure correct drilling angles. The first picture is of a mounting gusset a local welding shop made. One is needed for each side and necessary to provide needed mounting strength-at least on my trailer frame. Pics 2 and 3 show the mounted suspension on one side of the trailer. Pic 4 shows the suspension on one side of the trailer with the axle attached and a separately purchased disc brake assembly mounted on it. Finally, pic 5 shows a 2” box channel between both suspension assemblies. Independent suspensions would have been nice, but I wanted to ensure trailer rigidity was maintained. So, after one year, so far, so good. It’s all smooth sailing down the highway.
We use Timbren's ASR3500S06 on all of our XER trailers. We couldn't be happier. It is a well built suspension.
# 7
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 1,200 lbs
The order came in on time and the customer service at etrailer.com (Ashley) and Sean from Tmbren was outstanding. They both were very helpful in my choosing the right product for my needs. The axle less suspension's performance is absolutely superb. It vastly improves ride quality. I am using it on a teardrop camper that often goes on gravel roads and the raddling sound from the leaf axles was horrible. A couple of points to consider before you settle on the axle less suspension: keep in mind that you will lose some hight of the trailer. While you will gain clearance from the lack of the axle, the suspension will make the trailer sit lower than before.i had to lower my hitch by an inch to maintain the trailer leveled. Also it does appear to compress at higher rate than the leaf springs, which makes it softer but easier to reach it's limit. Overall this product is absolutely a must if you are looking to improve the safety and the quality of your towing.
etrailer has Great Products for Building or repairing trailers!
# 8
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 5 Bolt - 3.5K
Great products,prices and people! Awesome experience!
How quickly I received the order was great.
# 9
Timbren Axle-Less Trailer Suspension - Heavy Duty - No Drop - 4 Bolt Flange - 2,000 lbs
Here are some pictures of my Timbren axle installation. I used a 2000# axle and a 3500# spindle combination. I am running a original 14" tire. It was a moderately easy installation.
Supply Chain Stinks! But Shawnee E with etrailer came through with options!
# 10
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs
Trailer suspension and disk brake performance is outstanding big big difference over leaf spring and electric drum brakes. Installation required modifications to the frame to monut the timbren suspension
Timbren saved our RV road trip! The leafs on the axle on our 2018 Jayco TT came apart while driving in Maryland. We tried going to the manufacturer, but they were useless. Going to a RV mechanic meant being grounded for at least 2 months. Then we found Timbren. With the help of Timbren's excellent staff we purchased axle-less system through etrailer, who made sure we got as quick as possible. It came ahead of schedule, my husband installed the Timbren system and we were back on the road! The axle-less system is better than the original manufacturers. If you plan on taking your RV or TT farther than 100 miles GET THIS INSTALLED and get it through etrailer.
# 11
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 3,500 lbs
I have had this axle on my trailer for a year now and could not be happier with it. Customer service was great dealing with them. I would highly recommend getting items for your trailer from here.
Mission accompolished just a few minutes ago. The attached (3) images attached tell the story. Any customer relocating spring seats should measure closely before welding new seats in place to fit their trailer needs. Again your technical assistance and quick order leave me a very very satisfied customer.. [Thumbs up]
# 12
Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 4 Bolt Flange - 2,000 lbs
I think their axle-less design is very clever. The build quality of the suspension part looks good. I have heartburn over the spindle build quality. The spindle is mounted to the suspension and then the trailer wheel mounts on the spindle. The spindles I received are warped from welding. The plate that bolts onto the suspension does not mount flat due to this warping. I called Timbren. The gentleman that helped me was very pleasant. I described the problems and he said he would check his inventory and call me back. He did call me back and said they are all like that. He said get out the grinder and fix what you can and just tighten the bolts super tight, maybe the gap will go away. Really? Wow. The other problems are a LOT of weld spatter where the bolts are supposed to fit and they made a bend in the plate too close to the bolt holes so two bolt heads hit the bend and dont fit flat against the part they are supposed to hold together. Yikes! I am taking the spindles to a machine shop to fix them but I would not have ordered this Timbren stuff had I been warned before hand. So, fair warning.
Great product so far after 1 year. Everthing is holding up and i have put it to good use on multiple occasions. The lift kit made my trailer off road capable and performed to my expectations.
# 13
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Drop - 4 Bolt Flange - 3,500 lbs
I purchased the 3500 lb. set w/4" drop. Wish they made a 2" drop. Install was fairly easy, but most of your time will be consumed with alignment measurements, acquiring shims, and making adjustments. I was lucky to have a very square trailer frame. However, the "slop" in the all of the mounting bolts (especially, the spindle mounts) is more than the 1/8" window they specify. You will want to preload all bolts before tightening, and then measure for alignment/toe-in. The units are supposed to have camber built-in, but it's not near enough (more shims). Also, this suspension has more travel then the documents indicated. I had to re-mount my fenders 1" higher to keep the tires front hitting. When fully loaded, you might have 1" of travel left. All that being said, the ride is better than I anticipated. It's less bouncy than a torsion axle, and very quiet. If I was building a trailer from scratch, I would use this system, again.
Very nice quality, I had to call Timbren with a question very good company to deal with and etrailer is a first class company very good customer service.
# 14
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs
Very nice axle and delivered quickly
Couldn't have done better. Quick shipping, perfect fit. Customer support was knowledgeable and helpful.
# 15
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
Axle arrived in perfect condition, was also an exact fit for my Top Hat Trailer. Your staff was of great help finding my right axle. I would recommend etrailer to everyone.
Perfect fit, nice axle and fast delivery. I liked it so much I ordered another a day later to replace the front axle. My 30 yr old tandem trailer's axle broke at the wheel, so I went to a local store which doesn't stock them anymore. Could of ordered a so so axle for $94 + $28 shipping and wait 2 weeks but needed it fast. I went to a major trailer sales & service shop and told "maybe we could get one for $250" with no call back. I decided to check out etrailer and was surprised to see Dexter axles that fit my trailer for $140 with FREE shipping in 3-4 days! Ordered Sat. night, got it Wednesday afternoon, and installed it (with brakes) in an hour. Only problem I had was determining if spindles would fit my hubs. They stated "1/16th spindle" and must be industry talk but french to me. So I had to look up bearing #'s they listed to check bearing sizes to make sure they fit my hubs. A little more time but not a deal breaker. The best part was the huge difference in ride with just one new axle. Always had bouncing loaded or not, but now with just one axle the ride is smoother no load and with my 4000 lb tractor on it. Can't wait to get the 2nd axle on that arrived today. First two pics show the difference between the old straight axle and the new dexter axle. The third is a pic of my 2nd axle, oh well. Etrailer is my new go to place for trailer parts. I have 7 trailers.
# 16
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
Easy ordering, quick shipping and prompt notification of each step of the process. The axle was exactly as advertised and fit my trailer perfectly. I am so glad I found etrailer, and will definitely recommend to my friends.
I replaced the noodley Lippert axles that bent on my utility trailer. Much better. They also have the proper bend in them for the load compensation. I took the part number off the Lippert axle, and etrailer was able to cross reference the part numbers for perfect fit.
# 17
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 4" Drop - 4 Bolt - 2K
building a ground loading motorcycle trailer the bed drops down flat threw the frame resting on the surface under the trailer allowing the motorcycle to be driven on without ramps or tilting the trailer bed the axle less trailer suspension is the only way to go and it rides better .
Atrocious packaging! Timbren should be ashamed of how they're sending this stuff out - packaged with flimsy paper and nothing else. Not surprisingly, the spindles arrived damaged to the point where replacements are being sent, and the main arms have big sections of powder coating missing from where the rattled around in the box. On the flip side - Etrailer has been awesome to work with and will be sending out replacement parts. I'll update this post after the parts arrive
# 18
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 5,200 lbs
After a rust related axle failure, my equipment trailer was down. (If you roll in the rust belt, check your axles near where the brake wire goes through) After checking my local source, I was told there was a long lead time for new axles due to the pandemic. I was so happy to find etrailer. They had the exact axles I needed. After I pulled the axles I realized I also needed hardware and u-bolts. Everything arrived ahead of schedule, allowing me to get back up and running quickly. Thank you etrailer. You are a valuable resource.
The axles were missing studs that fell out during shipping. Also, no nuts were included for mounting the brakes.
# 19
Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 7,000 lbs
Little damage from handling put still good
etrailer decided to ship this 140lbs axle via US Mail. Scheduled delivery was in 5 days from date of order. Immediately after getting the USPS tracking I called and was on hold forever. I was told it was new people in shipping and my axle would arrive on time. A month later and numerous calls later, still no axle, my mail man said " no way would he would be delivering anything that size". I was then told I would get it refunded since it was lost in the mail. A month later, and several calls saying the refund was "processes" still no refund. Then I was told I'd have to ship it back before getting a refund. But I still never received it. 2 months later an un marked car delivered it and finally etrailer sent a UPS pickup and got refunded. 3 months of different stories everytime I called. Be aware, they must have a lot of newbies at etrailer.
What our customers are saying:
"very easy to shop"