# 1
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
After receiving my shipment yesterday, I was concerned that parts may have been missing due to the shape of the shipping box and the lack of packing material. During the installation of the shackles, the third shackle nuts/bolts stripped out when tightened by hand. The shackle had to be cut off since the nuts could not be properly tightened. I have emailed etrailer with this issue and hopefully we can resolve the issue quickly.
I really wanted to give this kit a 5 star review, however it fell short in more than one way. The parts are very nice and heavy duty looking and went together purrty good. However, when I went to grease the shackles none took grease it just came out around the fitting, so I changed the end on my grease gun thinking it was just worn out, still same problem. I had to hold the fitting on the zirk as hard as I could and finally got them to take grease, one still hasn't taken grease and not sure what I'm going to do. I left all hardware loose to this point to make sure there was no un nessesary pressure on anything hoping it would take grease easy. It's like the heads of the zirks are a size to small. After greasing everything the best I could I tightened everything up, during this process I had 2 nuts that the threads pulled out of... Just as they got tight they started to loosen up, I was using a standard length 1\2 drive craftsman ratchet, and I'm not hulk. I ended up having a few nuts and washers that worked but still this shouldn't have happened. Makes me wonder about the rest of the metals strength. Looks heavy duty but I'm starting to wonder about longevity.
# 2
CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
etrailer has become my source for almost everything for repairing or upgrading our trailer, the replacement of broken leaf springs being the most recent project. If you have questions about the correct part for your project, search the customer service frequently asked questions. There is a lot of helpful information in there that you may not find on other websites. You can also contact customer service if you don't find a useful answer.
Received my two orders and I'm impressed with the quality I see. I am in the process of cutting off the old rusted out fenders so it will be a little while before I can install the new springs and shackle kits. After that I can then install the new fenders and my trailer should be like new. Thank you for the help and prompt service.
# 3
Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
These are the exact bolts used by the manufacturer of my trailer. I had a spring break after 10yrs use, so am replacing the springs and all the bolts at the same time, thank you to etrailer for the springs (ordered earlier) and now the bolts/nuts, all arrived quickly and accurately, you are my first choice for all trailer parts for my 7 trailers, thank you and keep up the good work!
When I ordered my kit from etrailer to replace the double-eye leaf springs on my 1970 Shasta Trailer, I decided to save a few bucks and get the bolts at my local hardware store. Big mistake! You wouldn't think a simple 3 inch bolt would be hard to find in your local hardware store. But in fact, i checked five hardware stores and none of them had this particular bolt. What a waste of time! I should have learned my lesson by now, and just give all my parts business to etrailer.com. I have probably spent more than $1000 in the past several months refurbishing our 1970 Shasta. Totally satisfied with the selection at etrailer, and the service is second to none!
# 4
Replacement U-Bolt w/Nuts for 7,500-lb, Round Trailer Axles - 9/16" Diameter
I had a hard time finding a u-bolt that would fit my vintage trailer. These were the perfect width but too long. I cut them to size and they fit perfectly. These were the only u-bolts I could find that would fit my leaf springs. They are good quality and have held up nicely. I just wish they made this size shorter.
Loved the updates on my order!
# 5
Replacement U-Bolt with Nuts for 2-3/8" Round Trailer Axles - 1/2" Diameter - Zinc Plated
We used the U-Bolts on a device built to allow multiple antennas on a single pole. I attached a couple of images, one after construction and one on a rooftop installation.
I tell all my friends to order from etrailer.com. great products from the u bolts to rims and tires. I have replaced all the rims and tires on my tandem axle boat trailer, you can not beat the price or the service. Pat C. is always spot on in guiding you to the right parts. shipping fast and on time. Thanks Pat C. and etrailer Barry
# 6
CE Smith Replacement U-Bolt w/ Nuts for 2-3/8" Round Axles - 1/2" Diameter - Galvanized
Replaced my whole boat trailer axle so I replaced the hardware too. Being galvanized really helped me decide to go with these. No rust and a year later.
Great items worked beautifully. MoRryde heavy duty shackle kit.
# 7
Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
Got the kit today. Some of the nuts were oval and would not fit on the bolt of course. Now I have to go to box store and find nuts that fit! Not very good quality control!!
This is exactly what I needed, Perfect fit, Easy installation. Old suspension worn out.
# 8
Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
First and foremost, working with etrailer was a pleasure. They were veery helpful in many ways. Secondly, Theproducts I purchased were exactly what I needed. I flipped the axle on my utility trailer in order to beef up the springs and use larger tires. The u-bolt kits were oerfect, and after having the spring seats welded onto the axle the rest of the job went smoothly. All in all 5 out of 5.
# 9
U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
I purchased this kit for the standard 5' x 8' 2,000 lb. trailer from Lowes. I did an axle flip and added larger tires. This is the perfect kit for this trailer. It went on easy, and the bolts were slightly longer. Also the bolts in this kit were fine thread instead of course thread. Overall an improvemet over the factory hardware and I had no issues. Shipped in a timely manner and packaged well. I highly recommend this kit if you plan on flipping the axle or need a replacement.
Moved my axle below the leaf springs, works a lot better for my needs now. Paul helped me put an order together, got it shipped that day and delivered two days later. Quality parts and outstanding customer service.
# 10
U-Bolt Plate for 2-1/2" Diameter, Round Trailer Axles with 2" Wide Springs
Seems sturdy, still working nice on my vintage trailer.
Excellant product quality and communicatiion. Fast shipping. I have made several orders from ETrailer and all have been great.
# 11
Nylon Bushing - 1/2" Inner Diameter, 7/8" Outer Diameter - 1-3/4" Long
This is exactly what I needed to replace the nylon bushings in my Trailex trailer, which were damaged when removing rusty bolts. As always, etrailer shipping was super-efficient.
I bought these bushings because they are the exact size of the wooden bushings which were used on old Radio Flyer wagons. I had my wagon from when I was a kid in the fifties . I decided to restore it for my grandsons and all went well until I took the wheels of and found that they had used wooden bushings not metal and they had disintegrated . These nylon bushings were the same dimensions as the axle and hub.I did change the color because my grandson like yellow with green. The wagon should last another hundred years now.
# 12
Straight Equalizer for 1-3/4" Double-Eye Springs - 5-1/2" Long - 9/16" Center Hole
These are working great.
Fit perfectly on trailer and came with bushings installed. Wasn't expecting that
# 13
Replacement Shackle Strap - 3-1/8" Long
Good quality, arrive in a fair amount of time, good info on site for trailer owners. Bought shackles bushings and bolts for my dual axel bass boat trailer. Never new how bad they get, glad I checked it in the garage, rather than failed on the road.
Straps seem to be good quality and fit just fine but came unpainted. I wasn't expecting them to be bare steel, but fortunately, I had a can of black Krylon. I'm only disappointed I had to delay the installation by about an hour to, clean, paint, and let dry. lost a star for no paint.
# 14
Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
Parts are a 5, delivery options questionable.Can't delivery 10 pounds of metal in a paper mailer. Was tore open on the bottom. I run a mailing business and I can tell you its not that much more expensive to use a box.
New bolts made replacement of springs easy
# 15
U-Bolt Plate for 2-3/8" Round Axle - 1-3/4" Wide Springs - 1/2" Bolts - Galvanized
1 Year in and still working flawlessly. Put around 2500 miles on the boat trailer since they have been installed.
Easy install. Holding up well in salt water.
# 16
U-Bolt Plate for 2-3/8" Diameter Axle, 1-3/4" Wide Spring - 1/2" Bolts - Galvanized
Perfect for my rebuilt trailer!
The product description made it easy to order the correct one the first time. Product arrived in timely manner and was as described. Competitively priced. Only negative was the center hole had to be reamed out a little to fit over the spring nut.
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."