# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
5 Stars. etrailer is the best ever.
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
# 2
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
Quality products. The hitch and wiring harness installed easily because of the quality detailed installation videos you provided. I couldn't be happier. I saved $ 300 by doing the installation myself. I plan on using the hitch for a bicycle rack and to pull a motorcyle trailor. Since I don't have a pickup it is really convenient to be able to tow a utility trailor when needed. Thanks etrailer! You have a good thing going. Keep up the good work.
This hitch was installed on my 2015 Subaru Forester 2.5i Limited. The website is fantastic and makes finding the correct products for your vehicle very easy. The hitch arrived in only a few days and came complete with all the necessary installation accessories. The hitch comes with fish wire for the frame bolts so you don't need to fuss with buying fish wire. Some reviews stated that you can go in from the inside of the vehicle but this is totally unnecessary and more work. Just follow the instructions, with exception of the muffler heat shield. You can drill 1/2" holes through the heat shield in the dimpled areas corresponding to where the instructions tell you to cut out the heat shield (see some of the other reviews for more detail on this). These holes allow you to securely fasten the heat shield over the hitch using the hitch bolts. Make sure you have a torque wrench and an 11/16" deep socket to tighten the frame bolts. I would also recommend removing the muffler which is very simple. Lube the muffler mounts with WD-40 to facilitate the removal of the muffler. You will save at least $300 installing this yourself.
# 3
Curt Class II Drawbar - 3/8" Rise, 1" Drop - 7-13/16" Long - 3,500 lbs
Great service, very prompt, with good customer contact and follow-up.
# 4
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
I purchased a Curt class II hitch for my wifes subaru. I recieved it right away and the installation was a breeze. There was a simple little piece of two sided tape missing from the light wire kit. I called etrailer and George sent it to me that day. Service after the sale is what makes a good company great. I couldn't be happier. Thanks alot etrailer!
# 5
Draw Tite Drawbar for 1-1/4" Hitch - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 3.5K
Every Item I have ordered from etrailer.com has been top of the line . Easy ordering , prompt service , and excellent installment instructions . I watch the video , more than once , and follow the expert's direction . I wouldnt order trailer parts anywhere else . Thank You
I believe my choice, with the help of etrailer, of this Draw-Tite trailer hitch receiver, along with a few other items to go with it, such as the drawbar, hitch ball and wiring harness, was a good one for my 2017 Subaru Forester. I also have to compliment etrailer for their excellent video on how to install it. All together, it really made the purchase very easy and smooth. Thanks etrailer.
# 6
Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs
Absolute breeze to install.
# 7
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
I have a custom made tow guard. The ball mount I have was too short to allow me to attach the tow guard to my new truck. I searched the web and found just what I needed at etrailer.com. It's the only site I found that carried the size I needed. The product fits my needs perfectly. I can now protect my boat from rocks and other road debris when towing. Thank you etrailer.com.
# 8
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
This ball mount is stout! And it's powder coated! This guy will last longer than the vehicle, or maybe me.
Quality products. The hitch and wiring harness installed easily because of the quality detailed installation videos you provided. I couldn't be happier. I saved $ 300 by doing the installation myself. I plan on using the hitch for a bicycle rack and to pull a motorcyle trailor. Since I don't have a pickup it is really convenient to be able to tow a utility trailor when needed. Thanks etrailer! You have a good thing going. Keep up the good work.
# 9
Reese Trailer Hitch Starter Ball Mount Kit
I needed an very specific ball mount(class I, 1/2" rise, 2" ball). etrailer had what I needed in stock and available to ship next day. I had the thing ordered in 60 seconds. Wish I wouldn't have waisted my time and gas shopping at my local hardware stores only to find they didnt have what I needed.
# 10
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 6-3/4" Long - 3,500 lbs
# 11
Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 6-3/4" Long - 2,000 lbs
The 5" rise works very well on an '07 Subaru Forester to level out a utility trailer with 12" wheels. Shipping was prompt as well.
# 12
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
i bout this product for my 2010 subaru forester to tow a 16" boat. It works much better than expected! The amount of cushion it provides is stellar! quite the amazing device! i will have one on every trailer that i buy.
Solid build and well designed mechanism for anti vibration!
What our customers are saying:
"Definately I will order from here again if I need anything. Not only was the service fantasic, the price was over welmed dirt cheap compared to so many others on the internet. The order was very professionally packaged and delv'd. I love this place. Definately I will be a returning customer."